IRM-V838M3-C/TR1

Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Pin Configuration Block Diagram 1. GND 2. VCC 3. OUT 4. GND Features ‧ High protection ability against EMI ‧ Available for various carrier frequencies ‧ min burst length: 12 cycles ‧ min gap length: 16 cycles ‧ Low operating voltage and low power consumption ‧ High immunity against ambient light ‧ High immunity against TFT and PDP backlight ‧ Long reception range ‧ High sensitivity ‧ Pb free and RoHS compliant ‧ Compliance with EU REACH ‧ Compliance Halogen Free (Br < 900 ppm, Cl < 900 ppm, Br+Cl < 1500 ppm) Description The device is miniature SMD type infrared receiver that has been developed and designed by using the latest IC technology. The PIN diode and preamplifier are assembled onto a lead frame and molded into an epoxy package which operated an IR filter. The demodulated output signal can directly be decoded by a microprocessor. 1 Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Applications ‧Light detecting portion of remote control ‧AV instruments such as Audio, TV, VCR, CD, MD, etc ‧Home appliances such as Air-conditioner, Fan, etc ‧Other devices using IR remote control ‧CATV set top boxes ‧Multi-media Equipment Application Circuit Parts Number Table 2 Model No. Carrier Frequency IRM-V838M3-C/TR1 38 kHz Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Absolute Maximum Ratings (Ta=25℃) *1 Parameter Symbol Rating Unit Supply Voltage Vcc 6 V Operating Temperature Topr -20 ~ +80 ˚C Storage Temperature Tstg -40 ~ +85 ˚C Tsol 260 ˚C Soldering Temperature *2 *1 Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. *2 Soldering time≦5 seconds Electro-Optical Characteristics (Ta=25℃, and Vcc=3.0V) Parameter Symbol Min. Typ. Max. Unit Condition Current consumption Icc - 0.4 0.6 mA No input signal Supply voltage VCC 2.7 - 5.5 V λp --- 940 --- nm L0 8 --- --- m L45 5 --- --- m Half angle(horizontal) φh --- ±45 --- deg Half angle(vertical) φv --- ±45 --- deg High level pulse width TH 400 --- 800 μs Low level pulse width TL 400 --- 800 μs Test signal according to *4 figure 1 High level output voltage VOH Vcc-0.4 --- --- V ISOURCE≦1μA Low level output voltage VOL --- 0.2 0.5 V ISINK≦2mA Peak wavelength See chapter *3 'Test method' Reception range *3 *4 3 The ray receiving surface at a vertex and relation to the ray axis in the range of θ=0° and θ=45°. A range from 30cm to the arrival distance. Average value of 50 pulses. Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Test method The specified electro-optical characteristics are valid under the following conditions. 1. Measurement environment A place without extreme light reflections. 2. External light The environment contains an ordinary, white fluorescent lamp without high frequency modulation. The color temperature is 2856K and the illumination at the IR receiver is less than 10 Lux (Ev≦10Lux). 3. Standard transmitter The test transmitter is calibrated by using the circuit shown in figure 2. The radiation intensity of the transmitter is adjusted until Vo=400mVp-p. Both the test transmitter and the photo diode have the peak wavelength of 940nm. The photo diode for calibration is PD438B (λp=940nm, Vr=5V). 4. The measurement system is shown in Fig.-3 Fig.-1 Transmitter Wave Form D.U.T output Pulse Fig.-2 standard transmitter calibration Fig.-2 Standard transmitter calibration 4 Fig.-3 Measuring System Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Typical Electro-Optical Characteristics Curves 5 Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Package Dimension (Dimensions in mm) Pin Configuration 1. GND 2. Vcc 3. Out 4. GND Note: Tolerances unless mentioned ±0.5mm. Unit: mm Recommend soldering patterns The following soldering patterns are recommended for reflow-soldering Note: Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. 6 Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series Code information Protocol Suitable JVC Yes Protocol Suitable Sharp Yes 2) Matsushita Yes Sony 12 bit Mitsubishi No Sony 15 bit No NEC Yes Sony 20 bit No RC5 Yes Toshiba Yes Yes Continuous Code No RC6 1) Yes RCA No 1) Best choice depends on RC6 mode. If data low time is below 22ms, M2 is the best choice, otherwise M3. 2) If only Sony 12 bit version is used, M3 is recommended otherwise M2 is the best choice. Tape & Reel Packing Specifications Packing Quantity 7 Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com DATASHEET Infrared Receiver Module IRM-V8XXM3-C/TR1 Series DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 8 Copyright © 2016, Everlight All Rights Reserved. Release Date: 2016/12/9. Issue No: DMO-0000605 Rev. 4 Ver.:4 Release Date:12/20/2016 　 狀態:Approved(正式發行) www.everlight.com