ITR9608

EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:1of8 MODEL NO: ITR9608 ■ Package Dimensions : SHENZHEN OFFICE: TEL: 86-755-33590909 00/03/27 10:41 AM FAX: 86-755-33590908 E-mail:evlight@163.com 1 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:2of8 MODEL NO: ITR9608 ◎Notes： ： 1.All dimensions are in millimeter. 2.General Tolerance:± 0.2mm 3.Lead spacing is measured where the lead emerge from the package. 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. ■ Descriptions: The ITR9608 (Slot Optical Switch) is a gallium arsenide infrared emitting diode which is coupled with a silicon photo transistor in a plastic housing. The packaging system is designed to optimizes the mechanical resolution, coupling efficiency, and insulates ambient light. The slot in the housing a provides a means of interrupting the signal with printer, scanner, copier, or other opaque material, switching the output from an ” ON” to” OFF” state. ■ Features: ．Wide gap between light emitter and detector(5.0mm) ．High sensing accuracy ．PWB mounting type package ■ Applications: ．Copier ．Printer ．Facsimile ．Ticket vending machine ．Opto-electronic switch 00/03/27 10:41 AM 2 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:3of8 MODEL NO: ITR9608 ■ Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Ratings Unit Pd 75 mW Input Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current IFP 1 A PC 75 mW IC 20 mA Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 5 V Operating Temperature Topr -25~+85 ℃ Storage Temperature Tstg -40~+85 ℃ Lead Soldering Temperature (1/16 inch from body for 5 seconds) Tsol 260 ℃ Power Dissipation at(or below) 25℃ Free Air Temperature Pulse width ≦100μs, Duty cycle=1% Collector Power Dissipation Output Collector Current ■ Electro-Optical Characteristics (Ta=25℃) Parameter Input Condition Forward Voltage VF - 1.2 1.5 V IF=20mA Reverse Current IR - - 10 μA VR=5V Peak Wavelength λP - 940 - nm IF=20mA ICEO - - 100 nA VCE(sat) - - 0.4 V VCE=20V Ee=0mW/cm2 IC=0.5mA Ee=10mW/cm2 IC(ON) 0.5 - - mA Rise time tr - 15 - μsec Fall time tf - 15 - μsec Output Collector Dark Current Transfer C-E Saturation Characteristic Voltage Collector Current 00/03/27 10:41 AM Symbol Min. Typ. Max. Unit 3 VCE=5V IF=20mA VCE=5V IC=1mA RL=1KΩ 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:4of8 MODEL NO: ITR9608 ■ Typical Characteristics For IR 00/03/27 10:41 AM 4 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:5of8 MODEL NO: ITR9608 ■Typical Characteristics For PT ■Typical Characteristics For ITR 00/03/27 10:41 AM 5 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:6of8 MODEL NO: ITR9608 ■Reliability test item and condition The reliability of products shall be satisfied with item listed below: Confidence level :90% LTPD:10% Parameter Temperature Cycle Purpose & Condition Failure Judgement Criteria Evaluates product's ability IR≧U x 2 to withstand exposure to Samples(n) Defective(c) n =22，c=0 Ic(on)≦L x 0.8 high temperature, low VF≧U x 1.2 temperature, and temperature variation between two limit temperature. Standard test Condition: 85℃~25℃~-55℃~25℃ 30min 5min 30min 5min 50 cycle Thermal Shock Evaluates product's ability to U：Upper specification limit L：Lower specification limit n =22，c=0 withstand rapid temperature change Standard test Condition: 85℃ ~ -55℃ 5min 5min 50cycle High Temperature Evaluates product's ability to Storage withstand prolonged storage n =22，c=0 at high temperature Standard test Condition: Temperature : 100 ℃ Time : 1000hrs Low Temperature Evaluates product's ability to Storage withstand prolonged storage n =22，c=0 at low temperature Standard test Condition: Temperature : -55 ℃ Time : 1000hrs 00/03/27 10:41 AM 6 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:7of8 MODEL NO: ITR9608 Parameter Failure Judgement Criteria Purpose & Condition Operating Life Test Evaluates product's endurance IR≧U x 2 to prolonged electrical or Samples(n) Defective(c) n =22，c=0 Ic(on)≦L x 0.8 temperature stresses. Standard VF≧U x 1.2 test Condition: VCE=5V IF=20mA Time : 1000hrs High Temperature U：Upper specification limit Evaluates product's ability to withstand prolonged storage High Humidity n =22，c=0 L：Lower specification limit at high temperature and high humidity. Standard test Condition: Temperature: 85℃ Relative humidity:85% Time : 1000hrs Soldering Heat Evaluates product's ability to n =22，c=0 withstand soldering heat Standard test conditions Solder temperature : 260±5℃ Solder time : 10 seconds ■Supplements 1.Parts (1) Chip Type IR PT Material GaAs Silicon Peak Wavelength 940 nm 860 nm (2)Material Type Material 00/03/27 10:41 AM Lead frame SPCC Wire Gold 7 Part Package Epoxy Holder NYLON 9608.DOC EVERLIGHT ELECTRONICS CO, LTD. Device Number: DRX-096-028 REV: 1.1 Ecn: Page:8of8 MODEL NO: ITR9608 ■Packing Specifications 4.5 3.5 Label 4.05.5 19± 0.5 1.Bag 15± 0.5 2.Box 15 22 9 EVERLIGHT Opto-electronic,Compoments Label 24 E V E R L I G H T 33 3.Carton CPN : Customer’s Product Number P/N : Product Number QTY : Packing Quantity CAT : Ranks HUE : Peak Wavelength REF : Reference 48 Label LOT NO : Lot Number MADE IN TAIWAN : Production place UNIT：cm ■Packing Quantity Specification 1.150Pcs/1Bag，4Bags/1Box 2.10Boxes/1Carton 00/03/27 10:41 AM 8 9608.DOC