PLT532

Technical Data Sheet Photo-link Light Transmitter Unit PLT532 Features !x High speed signal transmissionΰ50Mbps NRZ Signalα x TTL interface compatible x +3~+5V single power source x Pb Free x The product itself will remain within RoHS compliant version. Descriptions The opto-electrical component is assembled with a 660nm GaAs RCLED and a driver IC. It transforms the electrical signal to optical signal and be transmitted by 1mm diameter plastic optical fiber. The component is operated at +3~+5V and has good performance at low dissipation current, steady light output and efficient light coupling. Applications x Digital audio equipment x CD player x DVD player x HDMI Digital (192kHz) Audio Interface x Below 50Mbps Transfer Signal Market Device Selection Guide Chip Material ӳp(nm) GaAs Dissipation Current(mA) Fiber Coupling Light Output (dBm) Operating Voltage (Vcc) Typ. Max. Min. Typ. Max. +3.0~5.0 8 10 -21 --- -15 660 Everlight Electronics Co., Ltd. http://www.everlight.com Device NO.: DPL-532-001 Prepared date: 7-20-2005 Rev 1 Page: 1 of 6 Prepared By: Chin-Chia Hsu PLT532 Package Dimension: Pin Function 1 : GND 2 : Vcc 3 : Vin 4 3 2 Notes: 1.All dimensions are in mm. 2.General Tolerance: Pin length tolerance is ±0.50 mm others are ±0.10 mm Everlight Electronics Co., Ltd. http://www.everlight.com Device NO.: DPL-532-001 Prepared date: 7-20-2005 Rev 1 Page: 2 of 6 Prepared By: Chin-Chia Hsu PLT532 Absolute Maximum Ratings( Ta = 25ºC) Parameter Symbol Rating Unit Supply Voltage Vcc -0.5 to 7 V DC Input Voltage Vin -0.5 to Vcc+0.5 V Storage Temperature Tstg -40 to 85 Operating Temperature Topr -20 to 70 Soldering Temperature Tsol 260* ºC ºC ºC * Soldering time d 10 s. Electro-Optical Characteristics Parameter Symbol Conditions MIN. TYP. MAX. Unit Vcc Low Voltage 2.75 3.00 3.25 V High Voltage 4.75 5.00 5.25 V 640 660 680 nm NRZ Code DC - 50 Mbps *1 *1 -21 5 -18 - -15 10 dBm mA Operating Voltage Peak Emission Wavelength Op Transmission Rate Fiber Coupling Output Power Dissipation Current Pf Icc High Level Input Voltage VIH 2 - - V Low Level Input Voltage VIL - - 0.8 V Rise Time Tr 50Mbps - 8 - ns Fall Time Tf 50Mbps - 8 - ns Low to High Delay Time tpLH *2 - - 50 ns High to Low Delay Time tpHL *2 - - 50 ns Pulse Width Distortion 'tw *2 -5 - 5 ns Jitter 'tj *2 - - 5 ns *All Plastic Optical Fiberΰ980/1000umα *Circuit Layout Notice: When power is off, it must be cut off together in Vin and Vcc pin. If it only has Vcc power-off, LED will sure to be no output power. Vcc Vin LED Condition 2.7~5.5V High ON 2.7~5.5V Low OFF 2.7~5.5V FLOATING OFF FLOATING 0~Vcc OFF Everlight Electronics Co., Ltd. http://www.everlight.com Device NO.: DPL-532-001 Prepared date: 7-20-2005 Rev 1 Page: 3 of 6 Prepared By: Chin-Chia Hsu PLT532 Measuring Method *1 Measuring method of optical output coupling fiber and dissipation current Standard plastic optic fiber cable PLT532 Transmitter Unit Vin Vcc Icc GND Optical power meter ADVANTEST Q8221 The optical power meter must be calibrated to have the wavelength sensitivity of 660nm ( 0 dBm = 1mW) 0.1uF Signal Input DC *2 5V Pulse response measuring method Standard plastic optic fiber cable PLT532 Transmitter Unit Vin Vcc Standard Receiver Unit GND 0.1uF Signal Input 5V CH1 NRZ "0101" successive signal input TPLH CH2 TPHL Input 50% Output 50% tj1 tj2 tw = TPHL-TPLH Everlight Electronics Co., Ltd. http://www.everlight.com Device NO.: DPL-532-001 Prepared date: 7-20-2005 Rev 1 Page: 4 of 6 Prepared By: Chin-Chia Hsu PLT532 Typical Electro-Optical Characteristics Curves Relative Output Power vs. Operating Temperature *Fig.4 Relative Output Power vs. Input Signal 105 100 100 90 90 80 80 Relative Output Power (%) 100 95 90 Vcc=5V Vcc=3V 70 60 60 50 85 0 20 40 60 80 50 2 100 3 Relative Output Power vs. Operating Voltage *Fig.6 5 6 Relative Output Power vs. Transfer Rate 100 Relative Output Power (%) 100 Relative Output Power (%) 4 AC Input Signal (Vin) o Operating Temperature ( C) *Fig.5 70 Relative Output Power (%) Relative Transmission Ourput Power (%) *Fig.3 80 60 40 20 80 Operating Voltage Vcc=5.0V 60 40 20 0 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0 10 20 30 40 50 Transfer Rate (Mbps) Operating Voltage (V) Everlight Electronics Co., Ltd. http://www.everlight.com Device NO.: DPL-532-001 Prepared date: 7-20-2005 Rev 1 Page: 5 of 6 Prepared By: Chin-Chia Hsu PLT532 Packing Quantity Specification 1. 500 pcs/bag 2. 4 bag/box Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product that does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device NO.: DPL-532-001 Prepared date: 7-20-2005 Rev 1 Page: 6 of 6 Prepared By: Chin-Chia Hsu