100304 Low Power Quint AND/NAND Gate
August 1989 Revised August 2000
100304 Low Power Quint AND/NAND Gate
General Description
The 100304 is monolithic quint AND/NAND gate. The Function output is the wire-NOR of all five AND gate outputs. All inputs have 50 kΩ pull-down resistors.
Features
s Low Power Operation s 2000V ESD protection s Pin/function compatible with 100104 s Voltage compensated operating range = −4.2V to −5.7V s Available to industrial grade temperature range (PLCC package only)
Ordering Code:
Order Number 100304PC 100304QC 100304QI Package Number N24E V28A V28A Package Description 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range (−40°C to +85°C)
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
Connection Diagrams
24-Pin DIP
Pin Descriptions
Pin Names Dna–Dne F Oa–Oe Oa–Oe Description Data Inputs Function Output Data Outputs Complementary Data Outputs 28-Pin PLCC
Logic Equation
F = (D1a • D2a) + (D1b • D2b) + (D1c • D2c) + (D1d • D2d) + (D1e • D2e).
© 2000 Fairchild Semiconductor Corporation
DS010581
www.fairchildsemi.com
100304
Absolute Maximum Ratings(Note 1)
Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note 2)
−65°C to +150°C +150°C −7.0V to +0.5V
VEE to +0.5V
Recommended Operating Conditions
Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) 0°C to +85°C
−40°C to +85°C −5.7V to −4.2V
−50 mA ≥2000V
Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Commercial Version DC Electrical Characteristics (Note 3)
VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input High Current D2a–D2e D1a–D1e IEE Power Supply Current −69 −43 250 350 −30 mA Inputs open µA VIN = VIH(Max) −1165 −1830 0.50 Min −1025 −1830 −1035 −1610 −870 −1475 Typ −955 −1705 Max −870 −1620 Units mV mV mV mV mV mV µA VIN =VIH (Max) or VIL (Min) VIN = VIH(Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Conditions Loading with 50Ω to −2.0V Loading with 50Ω to −2.0V
Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under “worst case” conditions.
DIP AC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Dna–Dne to O, O Propagation Delay Data to F Transition Time 20% to 80%, 80% to 20% T C = 0 °C Min 0.40 1.00 0.35 Max 1.75 2.60 1.20 TC = +25°C Min 0.40 1.00 0.35 Max 1.65 2.60 1.20 TC = +85°C Min 0.40 1.15 0.35 Max 1.75 3.20 1.20 Units ns ns ns Figures 1, 2 Conditions
PLCC AC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Dna–Dne to O, O Propagation Delay Data to F Transition Time 20% to 80%, 80% to 20% T C = 0 °C Min 0.40 1.00 0.35 Max 1.55 2.40 1.10 TC = +25°C Min 0.40 1.00 0.35 Max 1.45 2.40 1.15 TC = +85°C Min 0.40 1.15 0.35 Max 1.55 3.00 1.10 Units ns ns ns Figures 1, 2 Conditions
www.fairchildsemi.com
2
100304
Industrial Version PLCC DC Electrical Characteristics (Note 4)
VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = −40°C to +85°C TC = −40°C Symbol Parameter Min Max VOH VOL VOHC VOLC VIH VIL IIL IIH Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current D2a–D2e D1a–D1e IEE Power Supply Current −69 250 350 −30 −69 250 350 −30 mA Inputs OPEN µA VIN = VIH (Max) −1170 −1830 0.50 −1085 −1830 −1095 −1565 −870 −1480 −1165 −1830 0.50 −870 −1575 TC = 0°C to +85°C Min −1025 −1830 −1035 −1610 −870 −1475 Max −870 −1620 Units mV mV mV mV µA Conditions VIN =VIH (Max) or VIL (Min) VIN = VIH(Min) or VIL (Max) for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Loading with 50Ω to −2.0V Loading with 50Ω to −2.0V
Guaranteed HIGH Signal
Note 4: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under “worst case” conditions.
PLCC AC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Dna–Dne to O, O Propagation Delay Data to F Transition Time 20% to 80%, 80% to 20% TC = 40°C Min 0.35 1.00 0.35 Max 1.55 2.40 1.10 TC = +25°C Min 0.40 1.00 0.35 Max 1.45 2.40 1.15 TC = +85°C Min 0.40 1.15 0.35 Max 1.55 3.00 1.10 Units ns Conditions
ns ns
Figures 1, 2
3
www.fairchildsemi.com
100304
Test Circuitry
Notes: VCC, VCCA = +2V, VEE = −2.5V L1 and L2 = equal length 50Ω impedance lines RT = 50Ω terminator internal to scope Decoupling 0.1 µF from GND to VCC and VEE All unused outputs are loaded with 50Ω to GND CL = Fixture and stray capacitance ≤ 3 pF
FIGURE 1. AC Test Circuit
Switching Waveforms
FIGURE 2. Propagation Delay and Transition Times
www.fairchildsemi.com
4
100304
Physical Dimensions inches (millimeters) unless otherwise noted
24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide Package Number N24E
5
www.fairchildsemi.com
100304 Low Power Quint AND/NAND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Package Number V28A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com
很抱歉,暂时无法提供与“100304PC”相匹配的价格&库存,您可以联系我们找货
免费人工找货