100313PCX

100313 Low Power Quad Driver September 1989 Revised August 2000 100313 Low Power Quad Driver General Description The 100313 is a monolithic quad driver with two OR and two NOR outputs and common enable. The common input is buffered to minimize input loading. If the D inputs are not used the Enable can be used to drive sixteen 50Ω lines. All inputs have 50 kΩ pull-down resistors and all outputs are buffered. Features s 50% power reduction of the 100113 s 2000V ESD protection s Pin/function compatible with 100113 and 100112 s Voltage compensated operating range = −4.2V to −5.7V s Available to industrial grade temperature range (PLCC package only) Ordering Code: Order Number 100313SC 100313PC 100313QC 100313QI Package Number M24B N24E V28A V28A Package Description 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range (−40°C to +85°C) Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagrams 24-Pin DIP/SOIC Pin Descriptions Pin Names Da–Dd E Ona–Ond Ona–Ond Description Data Inputs Enable Input Data Outputs Complementary Data Outputs 28-Pin PLCC © 2000 Fairchild Semiconductor Corporation DS010249 www.fairchildsemi.com 100313 Truth Table Inputs E H L L L L L L L L L L L L L L L L Da X L L L L L L L L H H H H H H H H Db X L L L L H H H H L L L L H H H H Dc X L L H H L L H H L L H H L L H H Dd X L H L H L H L H L H L H L H L H O1a, 02a H L L L L L L L L H H H H H H H H O1a, O2a L H H H H H H H H L L L L L L L L Outputs O1b, 02b O1b, 02b O1c, 02c O1c, 02c O1d, 02d O1d, 02d H L L L L H H H H L L L L H H H H L H H H H L L L L H H H H L L L L H L L H H L L H H L L H H L L H H L H H L L H H L L H H L L H H L L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care www.fairchildsemi.com 2 100313 Absolute Maximum Ratings(Note 1) Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output Current (DC Output HIGH) ESD (Note 2) −65°C to +150°C +150°C −7.0V to +0.5V VEE to +0.5V Recommended Operating Conditions Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) 0°C to +85°C −40°C to +85°C −5.7V to −4.2V −50 mA ≥2000V Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Commercial Version DC Electrical Characteristics (Note 3) VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Data Enable IEE Power Supply Current −59 350 240 −29 mA Inputs OPEN µA VIN = VIH (Max) −1165 −1830 0.50 Min −1025 −1830 −1035 −1610 −870 −1475 Typ −955 −1705 Max −870 −1620 Units mV mV mV mV µA VIN =VIH (Max) or VIL (Min) VIN = VIH (Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Conditions Loading with 50Ω to −2.0V Loading with 50Ω to −2.0V Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under “worst case” conditions. DIP AC Electrical Characteristics VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Propagation Delay Enable to Output Transition Time 20% to 80%, 80% to 20% TC = 0°C Min 0.55 0.80 0.45 Max 1.30 1.80 1.30 TC = +25°C Min 0.55 0.80 0.45 Max 1.30 1.80 1.30 TC = +85°C Min 0.55 0.80 0.45 Max 1.40 1.90 1.30 Units ns ns ns Conditions Figures 1, 2 (Note 4) Figures 1, 2 Note 4: The propagation delay specified is for single output switching. Delays may vary up to 150 ps with multiple outputs switching. 3 www.fairchildsemi.com 100313 Commercial Version (Continued) SOIC and PLCC AC Electrical Characteristics VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL tOSHL Parameter Propagation Delay Data to Output Propagation Delay Enable to Output Transition Time 20% to 80%, 80% to 20% Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOSHL Maximum Skew Common Edge Output-to-Output Variation Enable to Output Path tOSLH Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOSLH Maximum Skew Common Edge Output-to-Output Variation Enable to Output Path tOST Maximum Skew Opposite Edge Output-to-Output Variation Data to Output Path tOST Maximum Skew Opposite Edge Output-to-Output Variation Enable to Output Path tPS Maximum Skew Pin (Signal) Transition Variation Data to Output Path tPS Maximum Skew Pin (Signal) Transition Variation Enable to Output Path Note 5: The propagation delay specified is for single output switching. Delays may vary up to 150 ps with multiple outputs switching. Note 6: Output-to-Output Skew is defined as the absolute value of the difference between the actual propagation delay for any outputs within the same packaged device. The specifications apply to any outputs switching in the same direction either HIGH-to-LOW (tOSHL), or LOW-to-HIGH (tOSLH), or in opposite directions both HL and LH (tOST). Parameters tOST and tPS guaranteed by design. T C = 0 °C Min 0.55 0.80 0.45 Max 1.20 1.70 1.30 TC = +25°C Min 0.55 0.80 0.45 Max 1.20 1.70 1.30 TC = +85°C Min 0.55 0.80 0.45 Max 1.30 1.80 1.30 Units Conditions ns ns ns Figures 1, 2 (Note 5) Figures 1, 2 PLCC Only 280 280 280 ps (Note 6) PLCC Only 290 290 290 ps (Note 6) PLCC Only 330 330 330 ps (Note 6) PLCC Only 360 360 360 ps (Note 6) PLCC Only 330 330 330 ps (Note 6) PLCC Only 360 360 360 ps (Note 6) PLCC Only 200 200 200 ps (Note 6) PLCC Only 200 200 200 ps (Note 6) www.fairchildsemi.com 4 100313 Industrial Version PLCC DC Electrical Characteristics (Note 7) VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = −40°C to +85°C TC = −40°C TC = 0°C to +85°C Symbol Parameter Min Max Min Max VOH VOL VOHC VOLC VIH VIL IIL IIH Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current Data Enable IEE Power Supply Current −59 350 240 −29 −59 350 240 −29 mA Inputs OPEN µA VIN = VIH(Max) −1170 −1830 0.50 −1085 −1830 −1095 −1565 −870 −1480 −1165 −1830 0.50 −870 −1575 −1025 −1830 −1035 −1610 −870 −1475 −870 −1620 Units mV mV mV mV µA VIN = VIH(Max) or VIL(Min) VIN = VIH(Min) or VIL(Max) Conditions Loading with 50Ω to −2.0V Loading with 50Ω to −2.0V Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL(Min) Note 7: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under “worst case” conditions. PLCC AC Electrical Characteristics VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay Data to Output Propagation Delay Enable to Output Transition Time 20% to 80%, 80% to 20% TC = −40°C Min 0.55 0.80 0.45 Max 1.20 1.70 1.30 TC = +25°C Min 0.55 0.80 0.45 Max 1.20 1.70 1.30 TC = +85°C Min 0.55 0.80 0.45 Max 1.30 1.80 1.30 Units ns ns ns Conditions Figures 1, 2 (Note 8) Figures 1, 2 Note 8: The propagation delay specified is for single output switching. Delays may vary up to 150 ps with multiple outputs switching. 5 www.fairchildsemi.com 100313 Test Circuitry Notes: VCC, VCCA = +2V, VEE = −2.5V. L1 and L2 = equal length 50Ω impedance lines. RT = 50Ω terminator internal to scope. Decoupling 0.1 µF from GND to VCC and VEE. All unused outputs are loaded with 50Ω to GND. CL = Fixture and stray capacitance ≤ 3 pF. FIGURE 1. AC Test Circuit Switching Waveforms FIGURE 2. Propagation Delay and Transition Times www.fairchildsemi.com 6 100313 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M24B 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide Package Number N24E 7 www.fairchildsemi.com 100313 Low Power Quad Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Package Number V28A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com