1N759A

Zeners 1N4370A - 1N4372A 1N746A - 1N759A Zeners 1N4370A - 1N4372A 1N746A - 1N759A Absolute Maximum Ratings * Symbol PD Parameter Power Dissipation @ TL ≤ 75°C, Lead Length = 3/8” Derate above 75°C TJ, TSTG Operating and Storage Temperature Range TA = 25°C unless otherwise noted Tolerance = 5% Units mW mW/°C °C Value 500 4.0 -65 to +200 * These ratings are limiting values above which the serviceability of the diode may be impaired. DO-35 Glass case COLOR BAND DENOTES CATHODE Electrical Characteristics Device 1N4370A 1N4371A 1N4372A 1N746A 1N747A 1N748A 1N749A 1N750A 1N751A 1N752A 1N753A 1N754A 1N755A 1N756A 1N757A 1N758A 1N759A Min. 2.28 2.57 2.85 3.14 3.42 3.71 4.09 4.47 4.85 5.32 5.89 6.46 7.13 7.79 8.65 9.50 11.40 Typ. 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 TA=25°C unless otherwise noted VZ (V) @ IZ = 20mA (Note 1) Max. 2.52 2.84 3.15 3.47 3.78 4.10 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.56 10.5 12.6 ZZ (Ω) @ IZ = 20mA 30 30 29 28 24 23 22 19 17 11 7 5 6 8 10 17 30 IZM (mA) (Note 2) IR (µA) @ VR = 1V Ta = 25°C 100 75 50 10 10 10 2 2 1 1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Ta = 125°C 200 150 100 30 30 30 30 30 20 20 20 20 20 20 20 20 20 150 135 120 110 100 95 85 75 70 65 60 55 50 45 40 35 30 VF Forward Voltage = 1.5V Max @ IF = 200mA Notes: 1. Zener Voltage (VZ) The zener voltage is measured with the device junction in the thermal equilibrium at the lead temperature (TL) at 30°C ± 1°C and 3/8” lead length. 2. Maximum Zener Current Ratings (IZM) The maximum current handling capability on a worst case basis is limited by the actual zener voltage at the operation point and the power derating curve. ©2004 Fairchild Semiconductor Corporation 1N4370A - 1N4372A 1N746A - 1N759A, Rev. C1 Zeners 1N4370A - 1N4372A 1N746A - 1N759A Top Mark Information Device 1N4370A 1N4371A 1N4372A 1N746A 1N747A 1N748A 1N749A 1N750A 1N751A 1N752A 1N753A 1N754A 1N755A 1N756A 1N757A 1N758A 1N759A Line 1 LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO LOGO Line 2 437 437 437 746 747 748 749 750 751 752 753 754 755 756 757 758 759 Line 3 0A 1A 2A A A A A A A A A A A A A A A Line 5 XY XY XY XY XY XY XY XY XY XY XY XY XY XY XY XY XY ©2004 Fairchild Semiconductor Corporation 1N4370A - 1N4372A 1N746A - 1N759A, Rev. C1 Zeners 1N4370A - 1N4372A 1N746A - 1N759A Top Mark Information (Continued) F 1st line: F - Fairchild Logo 2nd line: Device Name - 3rd to 5th characters of the device name. or 4th to 6th characters for BZXyy series 3rd line: Device Name - 6th to 7th characters of the device name. or Voltage rating for BZXyy series 4th line: Device Code or - Two Digit - Six Weeks Date Code. Date code plus or Two Digit - Six Weeks Date Code Large die identification plus Large die identification, “L” 522 9B XY General Requirements: 1.0 Cathod Band 2.0 First Line: F - Fairchild Logo 3.0 Second Line: Device name - For 1Nxx series: 3rd to 5th characters of the device name. For BZxx series: 4th to 6th characters of the device name. 4.0 Third Line: Device name - For 1Nxx series: 6th to 7th characters of the device name. For BZXyy series: Voltage rating 5.0 Fourth Line: XY or XYL - Two Digit - Six Weeks Date Code Where: X represents the last digit of the calendar year Y represents the Six weeks numeric code L represents the Large die identification 6.0 Devices shall be marked as required in the device specification (PID or FSC Test Spec). 7.0 Maximum no. of marking lines: 4 8.0 Maximum no. of digits per line: 3 9.0 FSC logo must be 20 % taller than the alphanumeric marking and should occupy the 2 characters of the specified line. 10.0 Marking Font: Arial (Except FSC Logo) 11.0 First character of each marking line must be aligned vertically ©2004 Fairchild Semiconductor Corporation 1N4370A - 1N4372A 1N746A - 1N759A, Rev. C1 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT Quiet Series™ ActiveArray™ FAST Bottomless™ FASTr™ CoolFET™ FPS™ CROSSVOLT™ FRFET™ DOME™ GlobalOptoisolator™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ FACT™ i-Lo™ Across the board. Around the world.™ The Power Franchise Programmable Active Droop™ DISCLAIMER ImpliedDisconnect™ PACMAN™ POP™ ISOPLANAR™ Power247™ LittleFET™ MICROCOUPLER™ PowerSaver™ PowerTrench MicroFET™ QFET MicroPak™ QS™ MICROWIRE™ QT Optoelectronics™ MSX™ Quiet Series™ MSXPro™ RapidConfigure™ OCX™ RapidConnect™ OCXPro™ SILENT SWITCHER OPTOLOGIC SMART START™ OPTOPLANAR™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I10