2KBP08M

2KBP005M/3N253 - 2KBP10M/3N259 2KBP005M/3N253 - 2KBP10M/3N259 Features • • • Surge overload rating: 60 amperes peak. Reliable low cost construction utilizing molded plastic technique. UL certified, UL #E111753. + ~~ - KBPM Bridge Rectifiers Absolute Maximum Ratings* Symbol VRRM VRMS VR IF(AV) IFSM Tstg TJ TA = 25°C unless otherwise noted Value Parameter Maximum Repetitive Reverse Voltage Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Average Rectified Forward Current, @ TA = 50°C Non-repetitive Peak Forward Surge Current Storage Temperature Range Operating Junction Temperature 005M 253 50 35 50 01M 254 100 70 100 02M 255 200 140 200 04M 256 400 280 400 2.0 60 -55 to +165 -55 to +165 06M 257 600 420 600 08M 258 800 560 800 10M 259 1000 700 1000 V V V A A °C °C Units *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol PD RθJA Power Dissipation Thermal Resistance, Junction to Ambient,* per leg Parameter Value 4.7 30 Units W °C/W *Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm). Electrical Characteristics Symbol VF IR TA = 25°C unless otherwise noted Parameter Forward Voltage, per bridge @ 3.14 A Reverse Current, total bridge @ rated VR TA = 25°C TA = 125°C I2t rating for fusing t < 8.35 ms Total Capacitance, per leg VR = 4.0 V, f = 1.0 MHz Device 1.1 5.0 500 15 25 Units V µA µA A2s pF CT 2001 Fairchild Semiconductor Corporation 2KBP005/3N253-2KBP10/3N259, Rev. D 2KBP005M/3N253 - 2KBP10M/3N259 Bridge Rectifiers (continued) Typical Characteristics 5 Average Rectified Forward Current, IF [A] 2 TYPICAL DISTRIBUTION Forward Current, IF [A] 1.5 1 1 MEDIAN 0.1 0.5 0 20 40 60 80 100 120 140 Ambient Temperature [ºC] 160 0.01 0 0.2 Figure 1. Forward Current Derating Curve 0.4 0.6 0.8 1 Forward Voltage, VF [V] 1.2 1.4 Figure 2. Forward Voltage Characteristics Peak Forward Surge Current, IFSM [A] 100 60 48 Reverse Current, IR [mA] 10 36 1 TA = 2 5º C 24 12 0.1 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] 0 1 2 5 10 20 50 Number of Cycles at 60Hz 100 Figure 3. Reverse Current vs Reverse Voltage Figure 4. Non-Repetitive Surge Current 2001 Fairchild Semiconductor Corporation 2KBP005/3N253-2KBP10/3N259, Rev. D TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT ™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ DISCLAIMER FAST ® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench ® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER ® SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET ® VCX™ STAR*POWER is used under license FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4