2N339

2N3390 / 2N3391 / 2N3391A / 2N3392 / 2N3393 Discrete POWER & Signal Technologies 2N3390 2N3391 2N3391A 2N3392 2N3393 B C TO-92 E NPN General Purpose Amplifier This device is designed for use as general purpose amplifiers and switches requiring collector currents to 300 mA. Sourced from Process 10. See PN100A for characteristics. Absolute Maximum Ratings* Symbol VCEO VCBO VEBO IC TJ, Tstg Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25°C unless otherwise noted Parameter Collector-Emitter Voltage Value 25 25 5.0 500 -55 to +150 Units V V V mA °C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RθJC RθJA TA = 25°C unless otherwise noted Characteristic Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Max 2N3390 / 3391/A / 3392 / 3393 625 5.0 83.3 200 Units mW mW/°C °C/W °C/W © 1 997 Fairchild Semiconductor Corporation 3390-93, Rev B 2N3390 / 2N3391 / 2N3391A / 2N3392 / 2N3393 NPN General Purpose Amplifier (continued) Electrical Characteristics Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Cutoff Current Emitter-Cutoff Current IC = 10 mA, IB = 0 IC = 10 µA, IE = 0 IE = 10 µA, IC = 0 VCB = 18 V, IE = 0 VEB = 5.0 V, IC = 0 25 25 5.0 100 100 V V V nA nA ON CHARACTERISTICS* hFE DC Current Gain VCE = 4.5 V, IC = 2.0 mA 2N3390 2N3391/A 2N3392 2N3393 400 250 150 90 800 500 300 180 SMALL SIGNAL CHARACTERISTICS Cob hfe Output Capacitance Small-Signal Current Gain VCB = 10 V, f = 1.0 MHz IC = 2.0 mA, VCE = 4.5 V, f = 1.0 kHz 2N3390 2N3391/A 2N3392 2N3393 VCE = 4.5 V, IC = 100 µA, RG = 500 Ω , 2N3391A only BW = 15.7 kHz 2.0 400 250 150 90 10 1250 800 500 400 5.0 dB pF NF Noise Figure *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%