74ACT04

74AC04 • 74ACT04 Hex Inverter November 1988 Revised February 2005 74AC04 • 74ACT04 Hex Inverter General Description The AC/ACT04 contains six inverters. Features s ICC reduced by 50% on 74AC only s Outputs source/sink 24 mA s ACT04 has TTL-compatible inputs Ordering Code: Order Number 74AC04SC 74AC04SCX_NL (Note 1) 74AC04SJ 74AC04MTC 74AC04MTCX_NL (Note 1) 74AC04PC 74ACT04SC 74ACT04SCX_NL (Note 1) 74ACT04MTC 74ACT04MTCX_NL (Note 1) 74ACT04PC Package Number M14A M14A M14D MTC14 MTC14 N14A M14A M14A MTC14 MTC14 N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in Tape and Reel.) Pb-Free package per JEDEC J-STD-020B. Note 1: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only. Logic Symbol IEEE/IEC Connection Diagram Pin Descriptions Pin Names An On FACT¥ is a trademark of Fairchild Semiconductor Corporation. Description Inputs Outputs © 2005 Fairchild Semiconductor Corporation DS009913 www.fairchildsemi.com 74AC04 • 74ACT04 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) DC Input Diode Current (IIK) VI VI 0.5V to 7.0V 20 mA 20 mA 0.5V to VCC  0.5V 20 mA 20 mA 0.5V to VCC  0.5V r50 mA r50 mA 65qC to 150qC 140qC Recommended Operating Conditions Supply Voltage (VCC) AC ACT Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Minimum Input Edge Rate ('V/'t) AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate ('V/'t) ACT Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V 125 mV/ns Note 2: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT¥ circuits outside databook specifications. 0.5V VCC  0.5V 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC DC Input Voltage (VI) DC Output Diode Current (IOK) VO VO 0.5V VCC  0.5V 40qC to 85qC DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) PDIP 125 mV/ns DC Electrical Characteristics for AC Symbol VIH Parameter Minimum HIGH Level Input Voltage VIL Maximum LOW Level Input Voltage VOH Minimum HIGH Level Output Voltage VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 VOL Maximum LOW Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 IIN (Note 5) IOLD IOHD ICC (Note 5) Maximum Input Leakage Current Minimum Dynamic Output Current (Note 4) Maximum Quiescent Supply Current 5.5 5.5 5.5 2.0 75 mA mA VOLD VOHD VIN or GND 1.65V Max 3.85V Min VCC 5.5 0.002 0.001 0.001 TA Typ 1.5 2.25 2.75 1.5 2.25 2.75 2.99 4.49 5.49 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86 0.1 0.1 0.1 0.36 0.36 0.36 25qC TA 40qC to 85qC 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 Guaranteed Limits Units VOUT V Conditions 0.1V or VCC  0.1V VOUT 0.1V V or VCC  0.1V V IOUT VIN 50 PA VIL or VIH 2.46 3.76 4.76 0.1 0.1 0.1 V V IOH IOH IOH IOUT VIN 12 mA 24 mA 24 mA (Note 3) 50 PA VIL or VIH 24 mA 24 mA (Note 3) VCC, GND 0.44 0.44 0.44 V IOL 12 mA IOL IOL VI r0.1 r1.0 PA 75 20.0 PA Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. www.fairchildsemi.com 2 74AC04 • 74ACT04 DC Electrical Characteristics for ACT Symbol VIH VIL VOH Parameter Minimum HIGH Level Input Voltage Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage VCC (V) 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 VOL Maximum LOW Level Output Voltage 4.5 5.5 4.5 5.5 IIN ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum ICC/Input Minimum Dynamic Output Current (Note 7) Maximum Quiescent Supply Current Note 6: All outputs loaded; thresholds on input associated with output under test. Note 7: M aximum test duration 2.0 ms, one output loaded at a time. TA Typ 1.5 1.5 1.5 1.5 4.49 5.49 25qC 2.0 2.0 0.8 0.8 4.4 5.4 3.86 4.86 TA 40qC to 85qC 2.0 2.0 0.8 0.8 4.4 5.4 3.76 4.76 0.1 0.1 0.44 0.44 Guaranteed Limits Units V V V VOUT VOUT IOUT VIN V V IOH IOH IOUT VIN Conditions 0.1V 0.1V or VCC  0.1V or VCC  0.1V 50 PA VIL or VIH 24 mA 24 mA (Note 6) 50 PA VIL or VIH 24 mA 24 mA (Note 6) VCC, GND VCC  2.1V 1.65V Max 3.85V Min VCC 0.001 0.001 0.1 0.1 0.36 0.36 V IOL0 IOL VI VI 5.5 5.5 5.5 5.5 5.5 0.6 r0.1 r1.0 1.5 75 PA mA mA mA VOLD VOHD VIN or GND 75 4.0 40.0 PA 3 www.fairchildsemi.com 74AC04 • 74ACT04 AC Electrical Characteristics for AC VCC Symbol tPLH tPHL Parameter Propagation Delay Propagation Delay (V) (Note 8) 3.3 5.0 3.3 5.0 Note 8: Voltage Range 3.3 is 3.3V r 0.3V Voltage Range 5.0 is 5.0V r 0.5V TA CL Min 1.5 1.5 1.5 1.5 25qC 50 p Typ 4.5 4.0 4.5 3.5 Max 9.0 7.0 8.5 6.5 TA 40qC to 85qC CL 50 pF Max 10.0 7.5 9.5 7.0 ns ns Units Min 1.0 1.0 1.0 1.0 AC Electrical Characteristics for ACT VCC Symbol tPLH tPHL Parameter Propagation Delay Propagation Delay (V) (Note 9) 5.0 5.0 Min 1.0 1.0 TA CL 25qC 50 pF Typ 6.0 5.5 Max 8.5 8.0 TA 40qC to 85qC CL 50 pF Max 9.0 8.5 ns ns Units Min 1.0 1.0 Note 9: Voltage Range 5.0 is 5.0V r 0.5V Capacitance Symbol CIN VCC Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 30.0 Units pF pF VCC VCC OPEN 5.0V Conditions www.fairchildsemi.com 4 74AC04 • 74ACT04 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 5 www.fairchildsemi.com 74AC04 • 74ACT04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 6 74AC04 • 74ACT04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 7 www.fairchildsemi.com 74AC04 • 74ACT04 Hex Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com