74ACT04MTC

74AC04, 74ACT04 Hex Inverter 74AC04, 74ACT04 Hex Inverter Features ■ ICC reduced by 50% on 74AC only ■ Outputs source/sink 24mA ■ ACT04 has TTL-compatible inputs September 2007 tm General Description The AC/ACT04 contains six inverters. Ordering Information Order Number 74AC04SC 74AC04SJ 74AC04MTC 74AC04PC 74ACT04SC 74ACT04MTC 74ACT04PC Package Number M14A M14D MTC14 N14A M14A MTC14 N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. (PC not available in Tape and Reel.) All packages are lead free per JEDEC: J-STD-020B standard. Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names An On Description Inputs Outputs FACT™ is a trademark of Fairchild Semiconductor Corporation. ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 74AC04, 74ACT04 Hex Inverter Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Supply Voltage DC Input Diode Current VI = –0.5V VI = VCC + 0.5V VI IOK DC Input Voltage DC Output Diode Current VO = –0.5V VO = VCC + 0.5V VO IO TSTG TJ DC Output Voltage Parameter Rating –0.5V to +7.0V –20mA +20mA –0.5V to VCC + 0.5V –20mA +20mA –0.5V to VCC + 0.5V ±50mA ±50mA –65°C to +150°C 140°C DC Output Source or Sink Current Storage Temperature Junction Temperature PDIP ICC or IGND DC VCC or Ground Current per Output Pin Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Supply Voltage AC ACT VI VO TA ∆V / ∆t ∆V / ∆t Input Voltage Output Voltage Operating Temperature Parameter Rating 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC –40°C to +85°C 125mV/ns 125mV/ns Minimum Input Edge Rate, AC Devices: VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate, ACT Devices: VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 2 74AC04, 74ACT04 Hex Inverter DC Electrical Characteristics for AC TA = +25°C Symbol VIH TA = –40°C to +85°C Units V 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.46 3.76 4.76 0.1 0.1 0.1 0.44 0.44 0.44 ±1.0 75 –75 µA mA mA µA V V V Parameter Minimum HIGH Level Input Voltage VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 Conditions VOUT = 0.1V or VCC – 0.1V VOUT = 0.1V or VCC – 0.1V IOUT = –50µA Typ. 1.5 2.25 2.75 1.5 2.25 2.75 2.99 4.49 5.49 2.1 Guaranteed Limits 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86 VIL Maximum LOW Level Input Voltage VOH Minimum HIGH Level Output Voltage VIN = VIL or VIH: 3.0 4.5 5.5 VOL Maximum LOW Level Output Voltage 3.0 4.5 5.5 VIN = VIL or VIH 3.0 4.5 5.5 IIN (3) IOH = –12mA IOH = –24mA IOH = –24mA(1) 0.002 0.001 0.001 IOL= 12mA IOL = 24mA IOL = 24mA(1) VI = VCC, GND VOLD = 1.65V Max. VOHD = 3.85V Min. VIN = VCC or GND IOUT = 50µA 0.1 0.1 0.1 0.36 0.36 0.36 ±0.1 Maximum Input Leakage Current Minimum Dynamic Output Current(2) Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 IOLD IOHD ICC (3) 2.0 20.0 Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0ms, one output loaded at a time. 3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 3 74AC04, 74ACT04 Hex Inverter DC Electrical Characteristics for ACT Symbol VIH VIL VOH Parameter Minimum HIGH Level Input Voltage Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage VCC (V) 4.5 5.5 4.5 5.5 4.5 5.5 TA = +25°C Conditions VOUT = 0.1V or VCC – 0.1V VOUT = 0.1V or VCC – 0.1V IOUT = –50µA VIN = VIL or VIH: TA = –40°C to +85°C Guaranteed Limits Units V V V 2.0 2.0 0.8 0.8 4.4 5.4 3.76 4.76 0.1 0.1 0.44 0.44 ±1.0 1.5 75 –75 µA mA mA mA µA V Typ. 1.5 1.5 1.5 1.5 4.49 5.49 2.0 2.0 0.8 0.8 4.4 5.4 3.86 4.86 0.001 0.001 0.1 0.1 0.36 0.36 ±0.1 0.6 4.5 5.5 VOL Maximum LOW Level Output Voltage 4.5 5.5 IOH = –24mA IOH = –24mA(4) IOUT = 50µA VIN = VIL or VIH: 4.5 5.5 IIN ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum ICC/Input Minimum Dynamic Output Current(5) Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 5.5 IOL= 24mA IOL= 24mA(4) VI = VCC, GND VI = VCC – 2.1V VOLD = 1.65V Max. VOHD = 3.85V Min. VIN = VCC or GND 4.0 40.0 Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time. ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 4 74AC04, 74ACT04 Hex Inverter AC Electrical Characteristics for AC TA = +25°C, CL = 50pF Symbol tPLH tPHL TA = –40°C to +85°C, CL = 50pF Min. 1.0 1.0 1.0 1.0 Parameter Propagation Delay Propagation Delay VCC (V)(6) 3.3 5.0 3.3 5.0 Min. 1.5 1.5 1.5 1.5 Typ. 4.5 4.0 4.5 3.5 Max. 9.0 7.0 8.5 6.5 Max. 10.0 7.5 9.5 7.0 Units ns ns Note: 6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V. AC Electrical Characteristics for ACT TA = +25°C, CL = 50pF Symbol tPLH tPHL TA = –40°C to +85°C, CL = 50pF Min. 1.0 1.0 Parameter Propagation Delay Propagation Delay VCC (V)(7) 5.0 5.0 Min. 1.0 1.0 Typ. 6.0 5.5 Max. 8.5 8.0 Max. 9.0 8.5 Units ns ns Note: 7. Voltage range 5.0 is 5.0V ± 0.5V. Capacitance Symbol CIN VCC Parameter Input Capacitance Power Dissipation Capacitance Conditions VCC = OPEN VCC = 5.0V Typ. 4.5 30.0 Units pF pF ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 5 74AC04, 74ACT04 Hex Inverter Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 6 74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 7 74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 8 74AC04, 74ACT04 Hex Inverter Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 9 74AC04, 74ACT04 Hex Inverter TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I31 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. No Identification Needed Full Production Obsolete Not In Production ©2005 Fairchild Semiconductor Corporation 74AC04, 74ACT04 Rev. 1.0 www.fairchildsemi.com 10