74ACT151

74AC151 • 74ACT151 8-Input Multiplexer November 1988 Revised November 1999 74AC151 • 74ACT151 8-Input Multiplexer General Description The AC/ACT151 is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one line of data from up to eight sources. The AC/ACT151 can be used as a universal function generator to generate any logic function of four variables. Both true and complementary outputs are provided. Features s ICC reduced by 50% s Outputs source/sink 24 mA s ACT151 has TTL-compatible inputs Ordering Code: Order Number 74AC151SC 74AC151SJ 74AC151MTC 74AC151PC 74ACT151SC 74ACT151SJ 74ACT151PC Package Number M16A M16D MTC16 N16E M16A M16D N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow Body 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow Body 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbols Connection Diagram IEEE/IEC Pin Descriptions Pin Names I0–I7 S0–S2 E Z Z Description Data Inputs Select Inputs Enable Input Data Output Inverted Data Output FACT is a trademark of Fairchild Semiconductor Corporation. © 1999 Fairchild Semiconductor Corporation DS009927 www.fairchildsemi.com 74AC151 • 74ACT151 Truth Table Inputs E H L L L L L L L L S2 X L L L L H H H H S1 X L L H H L L H H S0 X L H L H L H L H Z H I0 I1 I2 I3 I4 I5 I6 I7 Outputs Z L I0 I1 I2 I3 I4 I5 I6 I7 Functional Description The AC/ACT151 is a logic implementation of a single pole, 8-position switch with the switch position controlled by the state of three Select inputs, S0, S1, S2. Both true and complementary outputs are provided. The Enable input (E) is active LOW. When it is not activated, the complementary output is HIGH and the true output is LOW regardless of all other inputs. The logic function provided at the output is: Z = E • (I0 • S0 • S1 • S2 + I1 • S0 • S1 • S2 + I2 • S0 • S1 • S2 + I3 • S0 • S1 • S2 + I4 • S0 • S1 • S2 + I5 • S0 • S1 • S2 + I6 • S0 • S1 • S2 + I 7 • S0 • S1 • S2) The AC/ACT151 provides the ability, in one package, to select from eight sources of data or control information. By proper manipulation of the inputs, the AC/ACT151 can provide any logic function of four variables and its complement. H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 74AC151 • 74ACT151 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) Junction Temperature (TJ) PDIP 140°C ±50 mA −65°C to +150 °C ±50 mA −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V −0.5V to +7.0V Recommended Operating Conditions Supply Voltage (VCC) AC ACT Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Minimum Input Edge Rate (∆V/∆t) AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V Minimum Input Edge Rate (∆V/∆t) ACT Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications. 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC −40°C to +85°C 125 mV/ns DC Electrical Characteristics for AC Symbol VIH Parameter Minimum HIGH Level Input Voltage VIL Maximum LOW Level Input Voltage VOH Minimum HIGH Level Output Voltage VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 VOL Maximum LOW Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 IIN (Note 4) IOLD IOHD ICC (Note 4) Maximum Input Leakage Current Minimum Dynamic Output Current (Note 3) Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 4.0 0.002 0.001 0.001 TA = +25°C Typ 1.5 2.25 2.75 1.5 2.25 2.75 2.99 4.49 5.49 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86 0.1 0.1 0.1 0.36 0.36 0.36 ±0.1 TA = −40°C to +85°C Guaranteed Limits 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 V IN = VIL or VIH 2.46 3.76 4.76 0.1 0.1 0.1 VIN = VIL or VIH 0.44 0.44 0.44 ±1.0 75 −75 40.0 µA mA mA µA V IOL = 12 mA IOL = 24 mA IOL = 24 mA (Note 2) V I = VCC, GND V OLD = 1.65V Max V OHD = 3.85V Min VIN = VCC or GND V IOUT = 50 µA V IOH = −12 mA IOH = −24 mA IOH = −24 mA(Note 2) V IOUT = −50 µA V V OUT = 0.1V or VCC − 0.1V V Units Conditions VOUT = 0.1V or VCC − 0.1V Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: M aximum test duration 2.0 ms, one output loaded at a time. Note 4: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. 3 www.fairchildsemi.com 74AC151 • 74ACT151 DC Electrical Characteristics for ACT Symbol VIH VIL VOH Parameter Minimum HIGH Level Input Voltage Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage V CC (V) 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 VOL Maximum LOW Level Output Voltage 4.5 5.5 4.5 5.5 IIN ICCT IOLD IOHD ICC Maximum Input Leakage Current Maximum ICC/Input Minimum Dynamic Output Current (Note 6) Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 5.5 4.0 0.6 0.001 0.001 TA = +25°C Typ 1.5 1.5 1.5 1.5 4.49 5.49 2.0 2.0 0.8 0.8 4.4 5.4 3.86 4.86 0.1 0.1 0.36 0.36 ±0.1 TA = −40°C to +85°C Guaranteed Limits 2.0 2.0 0.8 0.8 4.4 5.4 3.76 4.76 0.1 0.1 0.44 0.44 ±1.0 1.5 75 −75 40.0 µA mA mA mA µA V V V Units V Conditions VOUT = 0.1V or VCC − 0.1V VOUT = 0.1V or VCC − 0.1V IOUT = −50 µA VIN = VIL or VIH V IOH = −24 mA IOH = −24 mA (Note 5) IOUT = 50 µA VIN = VIL or VIH V IOL = 24 mA IOL = 24 mA (Note 5) VI = VCC, GND VI = VCC − 2.1V VOLD = 1.65V Max VOHD = 3.85V Min VIN = VCC or GND Note 5: All outputs loaded; thresholds on input associated with output under test. Note 6: Maximum test duration 2.0 ms, one output loaded at a time. AC Electrical Characteristics for AC VCC Symbol Parameter (V) (Note 7) tPLH tPHL tPLH tPHL tPLH tPHL Propagation Delay Sn to Z or Z Propagation Delay Sn to Z or Z Propagation Delay E to Z or Z Propagation Delay E to Z or Z Propagation Delay In to Z or Z Propagation Delay In to Z or Z Note 7: Voltage Range 3.3 is 3.3V ± 0.3V Voltage Range 5.0 is 5.0V ± 0.5V TA = +25°C CL = 50 pF Min 3.0 2.5 2.5 2.0 2.5 2.0 1.5 1.5 2.5 1.5 2.5 1.5 Typ 11.5 8.5 12.0 8.5 8.0 6.0 8.5 6.5 9.5 7.0 9.5 7.0 Max 18.0 13.0 18.0 13.0 13.0 10.0 13.0 10.0 14.0 10.5 15.0 11.0 TA = −40°C to +85°C CL = 50 pF Min 3.0 2.0 2.5 1.5 2.0 1.5 1.5 1.5 2.0 1.5 2.0 1.5 Max 20.0 15.0 20.0 15.0 14.0 11.0 14.0 11.0 15.5 11.0 16.0 12.0 ns ns ns ns ns ns Units 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 www.fairchildsemi.com 4 74AC151 • 74ACT151 AC Electrical Characteristics for ACT VCC Symbol tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL Parameter Propagation Delay Sn to Z Propagation Delay Sn to Z Propagation Delay Sn to Z Propagation Delay Sn to Z Propagation Delay E to Z Propagation Delay E to Z Propagation Delay E to Z Propagation Delay E to Z Propagation Delay In t o Z Propagation Delay In t o Z Propagation Delay In t o Z Propagation Delay In t o Z Note 8: Voltage Range 5.0 is 5.0V ± 0.5V TA = +25°C CL = 50 pF Min 3.5 3.5 3.5 4.0 2.5 2.5 2.5 3.0 3.5 3.5 3.5 4.0 Typ 12.5 12.5 12.5 12.5 6.0 6.0 6.0 6.5 7.5 8.0 8.0 8.0 Max 15.5 15.5 15.0 16.5 9.5 9.0 8.5 10.0 11.5 12.0 12.0 12.5 TA = −40°C to +85°C CL = 50 pF Min 3.0 3.0 3.0 3.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0 Max 17.0 16.5 16.5 18.5 10.0 10.0 9.5 10.5 12.5 13.5 13.0 14.0 ns ns ns ns ns ns ns ns ns ns ns ns Units (V) (Note 8) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Capacitance Symbol CIN CPD Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 70.0 Units pF pF VCC = OPEN VCC = 5.0V Conditions 5 www.fairchildsemi.com 74AC151 • 74ACT151 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow Body Package Number M16A www.fairchildsemi.com 6 74AC151 • 74ACT151 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Small Outline Package (SOIC), EIAJ TYPE II, 5.3mm Wide Package Number M16D 7 www.fairchildsemi.com 74AC151 • 74ACT151 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 www.fairchildsemi.com 8 74AC151 • 74ACT151 8-Input Multiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com