74F30SC

74F30 8-Input NAND Gate April 1988 Revised January 2004 74F30 8-Input NAND Gate General Description This device contains a single gate, which performs the logic NAND function. Ordering Code: Order Number 74F30SC (Note 1) 74F30SJ 74F30PC Package Number M14A M14D N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Note 1: D evices also available in Tape and Reel. Specify by appending the letter “X” to the ordering code. Logic Symbol IEEE/IEC Connection Diagram Unit Loading/Fan Out U.L. Pin Names Description A0–A7 O Inputs Output 1.0/1.0 50/33.3 Input IIH/IIL HIGH/LOW Output IOH/IOL 20 µA/−0.6 mA Function Table Inputs A0 L X X X X X X X H A1 X L X X X X X X H A2 X X L X X X X X H A3 X X X L X X X X H A4 X X X X L X X X H A5 X X X X X L X X H A6 X X X X X X L X H A7 X X X X X X X L H Output O H H H H H H H H L −1 mA/20 mA H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial © 2004 Fairchild Semiconductor Corporation DS009560 www.fairchildsemi.com 74F30 Absolute Maximum Ratings(Note 2) Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 3) Input Current (Note 3) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) −65°C to +150 °C −55°C to +125 °C −55°C to +150C −0.5V to +7.0V −0.5V to +7.0V −30 mA to +5.0 mA Recommended Operating Conditions Free Air Ambient Temperature Supply Voltage 0°C to +70°C +4.5V to +5.5V −0.5V to VCC −0.5V to +5.5V Note 2: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 3: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol VIH VIL VCD VOH VOL IIH IBVI ICEX VID IOD IIL IOS ICCH ICCL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Short-Circuit Current Power Supply Current Power Supply Current −60 0.5 4.75 3.75 −0.6 −150 1.5 4.5 10% VCC 5% VCC 10% VCC 2.5 2.7 0.5 5.0 7.0 50 Min 2.0 0.8 −1.2 Typ Max Units V V V V V µA µA µA V µA mA mA mA mA Min Min Min Max Max Max 0.0 0.0 Max Max Max Max VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN = −18 mA IOH = −1 mA IOH = −1 mA IOL = 20 mA VIN = 2.7V VIN = 7.0V VOUT = VCC IID = 1.9 µA All Other Pins Grounded VIOD = 150 mV All Other Pins Grounded VIN = 0.5V VOUT = 0V VO = HIGH VO = LOW AC Electrical Characteristics TA = +25°C Symbol Parameter Min tPLH tPHL Propagation Delay A n to O 1.0 1.5 VCC = +5.0V CL = 50 pF Typ 3.7 2.8 Max 5.0 5.0 TA = 0°C to +70°C VCC = +5.0V CL = 50 pF Min 1.0 1.5 Max 5.5 5.5 ns Units www.fairchildsemi.com 2 74F30 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 3 www.fairchildsemi.com 74F30 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 74F30 8-Input NAND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 5 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com