74F379

74F379 Quad Parallel Register with Enable May 1988 Revised August 1999 74F379 Quad Parallel Register with Enable General Description The 74F379 is a 4-bit register with buffered common Enable. This device is similar to the 74F175 but features the common Enable rather than common Master Reset. Features s Edge triggered D-type inputs s Buffered positive edge-triggered clock s Buffered common enable input s True and complement outputs Ordering Code: Order Number 74F379SC 74F379SJ 74F379PC Package Number M16A M16D N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbols Connection Diagram IEEE/IEC © 1999 Fairchild Semiconductor Corporation DS009527 www.fairchildsemi.com 74F379 Unit Loading/Fan Out U.L. Pin Names E D0–D3 CP Q0–Q3 Q0–Q3 Description HIGH/LOW Enable Input (Active LOW) Data Inputs Clock Pulse Input (Active Rising Edge) Flip-Flop Outputs Complement Outputs 1.0/1.0 1.0/1.0 1.0/1.0 50/33.3 50/33.3 Input IIH/IIL Output IOH/IOL 20 µA/−0.6 mA 20 µA/−0.6 mA 20 µA/−0.6 mA −1 mA/20 mA −1 mA/20 mA Functional Description The 74F379 consists of four edge-triggered D-type flipflops with individual D inputs and Q and Q outputs. The Clock (CP) and Enable (E) inputs are common to all flipflops. When the E is input HIGH, the register will retain the present data independent of the CP input. The Dn and E inputs can change when the clock is in either state, provided that the recommended setup and hold times are observed. Truth Table Inputs E H L L CP Outputs Dn X H L Qn NC H L Qn NC L H    H = H IGH Voltage Level L = LOW Voltage Level X = Immaterial = LOW-to-HIGH Transition NC = No Change  Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 74F379 Absolute Maximum Ratings(Note 1) Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 2) Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) ESD Last Passing Voltage (Min) twice the rated IOL (mA) 4000V −0.5V to VCC −0.5V to +5.5V −65°C to +150°C −55°C to +125°C −55°C to +150°C −0.5V to +7.0V −0.5V to +7.0V −30 mA to +5.0 mA Recommended Operating Conditions Free Air Ambient Temperature Supply Voltage 0°C to +70°C +4.5V to +5.5V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol VIH VIL VCD VOH VOL IIH IBVI ICEX VID IOD IIL IOS ICCL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Short-Circuit Current Power Supply Current −60 28 4.75 3.75 −0.6 −150 40 5.0 7.0 50 µA µA µA V µA mA mA mA Max Max Max 0.0 0.0 Max Max Max VIN = 2.7V VIN = 7.0V VOUT = VCC IID = 1.9 µA All Other Pins Grounded VIOD = 150 mV All Other Pins Grounded VIN = 0.5V VOUT = 0V VO = LOW 10% VCC 5% VCC 10% VCC 2.5 2.7 0.5 Min 2.0 0.8 −1.2 Typ Max Units V V V V V Min Min Min VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN = −18 mA IOH = −1 mA IOH = −1 mA IOL = 20 mA 3 www.fairchildsemi.com 74F379 AC Electrical Characteristics TA = +25°C Symbol Parameter Min fMAX tPLH tPHL Maximum Clock Frequency Propagation Delay CP to Qn, Qn 100 3.5 5.0 VCC = +5.0V CL = 50 pF Typ 140 5.0 6.5 6.5 8.5 Max TA = −55°C to +125°C VCC = +5.0V CL = 50 pF Min 75 3.0 4.0 8.5 10.0 Max TA = 0°C to +70°C VCC = +5.0V CL = 50 pF Min 100 3.5 5.0 7.5 9.5 Max MHz ns Units AC Operating Requirements TA = +25°C Symbol Parameter VCC = +5.0V Min tS(H) tS(L) tH(H) tH(L) tS(H) tS(L) tH(H) tH(L) tW(H) tW(L) Setup Time, HIGH or LOW Dn to CP Hold Time, HIGH or LOW Dn to CP Setup Time, HIGH or LOW E to CP Hold Time, HIGH or LOW E to CP CP Pulse Width HIGH or LOW 3.0 3.0 1.0 1.0 6.0 6.0 0 0 4.0 5.0 Max TA = −55°C to +125°C VCC = +5.0V Min 4.0 4.0 2.0 2.0 8.0 8.0 0 0 5.0 7.0 Max TA = 0°C to +70°C VCC = +5.0V Min Max 3.0 3.0 1.0 1.0 6.0 6.0 0 0 4.0 5.0 ns ns ns Units www.fairchildsemi.com 4 74F379 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 5 www.fairchildsemi.com 74F379 Quad Parallel Register with Enable Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com