74F821

74F821 10-Bit D-Type Flip-Flop April 1988 Revised August 1999 74F821 10-Bit D-Type Flip-Flop General Description The 74F821 is a 10-bit D-type flip-flop with 3-STATE true outputs arranged in a broadside pinout. Features s 3-STATE Outputs Ordering Code: Order Number 74F821SC 74F821SPC Package Number M24B N24C Package Description 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-100, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbols Connection Diagram IEEE/IEC © 1999 Fairchild Semiconductor Corporation DS009595 www.fairchildsemi.com 74F821 Unit Loading/Fan Out Pin Names D0–D9 OE CP O0–O9 Description Data Inputs Output Enable 3-STATE Input Clock Input 3-STATE Outputs 1.0/1.0 150/40 (33.3) 20 µA/−0.6 mA −3.0 mA/24 mA (20 mA) U.L. HIGH/LOW 1.0/1.0 1.0/1.0 Input IIH/IIL Output IOH/IOL 20 µA/−0.6 mA 20 µA/−0.6 mA Functional Description The 74F821 consists of ten D-type edge-triggered flipflops. This device has 3-STATE true outputs for bus systems organized in a broadside pinning. The buffered Clock (CP) and buffered Output Enable (OE) are common to all flip-flops. The flip-flops will store the state of their individual D inputs that meet the setup and hold times requirements on the LOW-to-HIGH CP transition. With the OE LOW the content of the flip-flops are available at the outputs. When the OE is HIGH, the outputs go to the high impedance state. Operation of the OE input does not affect the state of the flip-flops. Function Table Inputs OE H H H H L L L L CP H D X X L H L H X X Internal Output Function Q NC NC H L H L NC NC O Z Z Z Z L H NC NC Hold Hold Load Load Data Available Data Available No Change in Data No Change in Data     L H L  Logic Diagram L = LOW Voltage Level H = HIGH Voltage Level X = Immaterial Z = High Impedance = LOW-to-HIGH Transition NC = No Change Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 74F821 Absolute Maximum Ratings(Note 1) Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 2) Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) −0.5V to VCC −0.5V to +5.5V −65°C to +150°C −55°C to +125°C −55°C to +150°C −0.5V to +7.0V −0.5V to +7.0V −30 mA to +5.0 mA Recommended Operating Conditions Free Air Ambient Temperature Supply Voltage 0°C to +70°C +4.5V to +5.5V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol VIH VIL VCD VOH Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage 10% VCC 10% VCC 5% VCC 5% VCC VOL IIH IBVI ICEX VID IOD IIL IOZH IOZL IOS ICCZ Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Leakage Current Output Leakage Current Output Short-Circuit Current Power Supply Current −60 78 4.75 3.75 −0.6 50 −50 −150 100 10% VCC 2.5 2.4 2.7 2.7 0.5 5.0 7.0 50 V µA µA µA V µA mA µA µA mA mA Min Max Max Max 0.0 0.0 Max Max Max Max Max V Min Min 2.0 0.8 −1.2 Typ Max Units V V V Min VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN = −18 mA IOH = −1 mA IOH = −3 mA IOH = −1 mA IOH = −3 mA IOL = 24 mA VIN = 2.7V VIN = 7.0V VOUT = VCC IID = 1.9 µA, All Other Pins Grounded VIOD = 150 mV All Other Pins Grounded VIN = 0.5V VOUT = 2.7V VOUT = 0.5V VOUT = 0V VO = HIGH Z 3 www.fairchildsemi.com 74F821 AC Electrical Characteristics TA = +25°C Symbol Parameter Min fMAX tPLH tPHL tPZH tPZL tPHZ tPLZ Maximum Clock Frequency Propagation Delay CP to On Output Enable Time OE to On Output Disable Time OE to On 100 2.0 2.0 2.0 2.0 1.5 1.5 VCC = +5.0V CL = 50 pF Typ 150 6.4 6.2 5.8 6.3 3.4 3.5 9.5 9.5 10.5 10.5 7.0 7.0 Max TA = −55°C to +125°C VCC = +5.0V CL = 50 pF Min 60 2.0 2.0 2.0 2.0 1.0 1.0 10.5 10.5 13.0 13.0 7.5 7.5 Max TA = 0°C to +70°C VCC = +5.0V CL = 50 pF Min 70 2.0 2.0 2.0 2.0 1.5 1.5 10.5 10.5 11.5 11.5 7.5 7.5 ns Max MHz ns Units AC Operating Requirements TA = +25°C Symbol Parameter VCC = +5.0V Min tS(H) tS(L) tH(H) tH(L) tW(H) tW(L) Setup Time, HIGH or LOW Dn to CP Hold Time, HIGH or LOW Dn to CP CP Pulse Width HIGH or LOW 2.5 2.5 2.5 2.5 5.0 5.0 Max TA = −55°C to +125°C VCC = +5.0V Min 4.0 4.0 2.5 2.5 6.0 6.0 Max TA = 0°C to +70°C VCC = +5.0V Min 3.0 3.0 2.5 2.5 6.0 6.0 ns ns Max Units www.fairchildsemi.com 4 74F821 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M24B 5 www.fairchildsemi.com 74F821 10-Bit D-Type Flip-Flop Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-100, 0.300 Wide Package Number N24C Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com