74F86PCX

74F86 2-Input Exclusive-OR Gate April 1988 Revised June 2003 74F86 2-Input Exclusive-OR Gate General Description This device contains four independent gates, each of which performs the logic exclusive-OR function. Ordering Code: Order Number 74F86SC 74F86SJ 74F86PC Package Number M14A M14D N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol IEEE/IEC Connection Diagram Unit Loading/Fan Out U.L. Pin Names An , Bn On Description Inputs Outputs HIGH/LOW 1.0/1.0 50/33.3 Input IIH/IIL Output IOH/IOL 20 µA/−0.6 mA −1 mA/20 mA © 2003 Fairchild Semiconductor Corporation DS009470 www.fairchildsemi.com 74F86 Absolute Maximum Ratings(Note 1) Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 2) Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) −65°C to +150 °C −55°C to +125 °C −55°C to +150 °C −0.5V to +7.0V −0.5V to +7.0V −30 mA to +5.0 mA Recommended Operating Conditions Free Air Ambient Temperature Supply Voltage 0°C to +70°C +4.5V to +5.5V −0.5V to VCC −0.5V to +5.5V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol VIH VIL VCD VOH VOL IIH IBVI ICEX VID IOD IIL IOS ICCH ICCL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current Output Short-Circuit Current Power Supply Current Power Supply Current −60 12 18 4.75 3.75 −0.6 −150 18 28 10% VCC 5% VCC 10% VCC 2.5 2.7 0.5 5.0 7.0 50 µA µA µA V µA mA mA mA mA Min 2.0 0.8 −1.2 Typ Max Units V V V V Min Min Min Max Max Max 0.0 0.0 Max Max Max Max VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN = −18 mA IOH = −1 mA IOH = −1 mA IOL = 20 mA VIN = 2.7V VIN = 7.0V VOUT = VCC IID = 1.9 µA All other pins grounded VIOD = 150 mV All other pins grounded VIN = 0.5V VOUT = 0V VO = HIGH VO = LOW AC Electrical Characteristics TA = +25°C Symbol Parameter Min tPLH tPHL tPLH tPHL Propagation Delay An, Bn to On (Other Input LOW) Propagation Delay An, Bn to On (Other Input HIGH) 3.5 3.0 5.3 4.7 7.0 6.5 3.5 3.0 8.0 7.5 ns 3.0 3.0 VCC = +5.0V CL = 50 pF Typ 4.0 4.2 Max 5.5 5.5 TA = 0°C to +70°C VCC = +5.0V CL = 50 pF Min 3.0 3.0 Max 6.5 6.5 ns Units www.fairchildsemi.com 2 74F86 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 3 www.fairchildsemi.com 74F86 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 74F86 2-Input Exclusive-OR Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 5 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com