74LCX02

74LCX02 Low Voltage Quad 2-Input NOR Gate with 5V Tolerant Inputs March 1995 Revised January 2005 74LCX02 Low Voltage Quad 2-Input NOR Gate with 5V Tolerant Inputs General Description The LCX02 contains four 2-input NOR gates. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems. The 74LCX02 is fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. Features s 5V tolerant inputs s 2.3V–3.6V VCC specification provided s 5.2 ns tPD max (VCC = 3.3V), 10 µA ICC max s Power down high impedance inputs and outputs s ±24 mA output drive (VCC = 3.0V) s Implements patented noise/EMI reduction circuitry s Latch-up performance exceeds 500 mA s ESD performance: Human body model > 2000V Machine model > 200V Ordering Code: Order Number 74LCX02M 74LCX02SJ 74LCX02MTC 74LCX02MTCX_NL (Note 1) Package Number M14A M14D MTC14 MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Note 1: “_NL” package available in Tape and Reel only. Logic Symbol IEEE/IEC Connection Diagram Pin Descriptions Pin Names An , Bn On Description Inputs Outputs © 2005 Fairchild Semiconductor Corporation ds012409 www.fairchildsemi.com 74LCX02 Absolute Maximum Ratings(Note 2) Symbol VCC VI VO IIK IOK IO ICC IGND TSTG Parameter Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Source/Sink Current DC Supply Current per Supply Pin DC Ground Current per Ground Pin Storage Temperature Value Conditions Units V V Output in HIGH or LOW State (Note 3) VI < GND VO < GND VO > VCC V mA mA mA mA mA −0.5 to +7.0 −0.5 to +7.0 −0.5 to VCC + 0.5 −50 −50 +50 ±50 ±100 ±100 −65 to +150 °C Recommended Operating Conditions (Note 5) Symbol VCC VI VO IOH/IOL Supply Voltage Input Voltage Output Voltage Output Current HIGH or LOW State VCC = 3.0V − 3.6V VCC = 2.7V − 3.0V VCC = 2.3V − 2.7V TA Free-Air Operating Temperature Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V Parameter Operating Data Retention Min 2.0 1.5 0 0 Max 3.6 3.6 5.5 VCC Units V V V mA ±24 ±12 ±8 −40 0 85 10 °C ns/V ∆t/∆V Note 2: The Absolute Maximum Ratings are those beyond which the safety of the device cannot be guaranteed. The device should not be operating at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage IOH = −100µA IOH = -8 mA IOH = −12 mA IOH = −18 mA IOH = −24 mA VOL LOW Level Output Voltage IOL = 100µA IOL = 8mA IOL = 12 mA IOL = 16 mA IOL = 24 mA II IOFF ICC ∆ICC Input Leakage Current Quiescent Supply Current Increase in ICC per Input 0 ≤ VI ≤ 5.5V VI = VCC or GND 3.6V ≤ VI ≤ 5.5V VIH = VCC −0.6V Power-Off Leakage Current VI or VO = 5.5V Conditions VCC (V) 2.3 − 2.7 2.7 − 3.6 2.3 − 2.7 2.7 − 3.6 2.3 − 3.6 2.3 2.7 3.0 3.0 2.3 − 3.6 2.3 2.7 3.0 3.0 2.3 − 3.6 0 2.3 − 3.6 2.3 − 3.6 2.3 − 3.6 VCC - 0.2 1.8 2.2 2.4 2.2 0.2 0.6 0.4 0.4 0.55 ±5.0 10 10 ±10 500 µA µA µA µA V V TA = −40°C to +85°C Min 1.7 2.0 0.7 0.8 Max V V Units www.fairchildsemi.com 2 74LCX02 AC Electrical Characteristics TA = −40°C to +85°C, RL = 500 Ω Symbol Parameter VCC = 3.3V ± 0.3V, CL= 50 pF Min tPHL tPLH tOSHL tOSLH Output to Output Skew (Note 5) Propagation Delay Time 1.5 1.5 Max 5.2 5.2 1.0 1.0 VCC = 2.7V CL = 50 pF Min 1.5 1.5 Max 6.0 6.0 VCC = 2.5V ± 0.2V CL = 30 pF Min 1.5 1.5 Max 6.2 6.2 ns ns Units Note 5: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Symbol VOLP VOLV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Conditions CL = 50 pF, VIH = 3.3V, VIL = 0V CL = 30 pF, VIH = 2.5V, VIL = 0V CL = 50 pF, VIH = 3.3V, VIL = 0V CL = 30 pF, VIH = 2.5V, VIL = 0V VCC (V) 3.3 2.5 3.3 2.5 TA = 25°C Typical 0.8 0.6 −0.8 −0.6 Units V V Capacitance Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance Parameter Conditions VCC = Open, VI = 0V or VCC VCC = 3.3V, VI = 0V or VCC VCC = 3.3V, VI = 0V or VCC, f = 10 MHz Typical 7 8 25 Units pF pF pF 3 www.fairchildsemi.com 74LCX02 AC Loading and Waveforms Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test tPLH, tPHL tPZL, tPLZ tPZH,tPHZ Switch Open 6V at VCC = 3.3 ± 0.3V VCC x 2 at VCC = 2.5 ± 0.2V GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output Low Enable and Disable Times for Logic Propagation Delay, Pulse Width and trec Waveforms Setup Time, Hold TIme and Recovery TIme for Logic 3-STATE Output High Enable and Disable TImes for Logic FIGURE 2. Waveforms (Input Pulse Characteristics; f=1MHz, tr=tf=3ns) Symbol Vmi Vmo Vx Vy VCC 3.3V ± 0.3V 1.5V 1.5V VOL + 0.3V VOH − 0.3V 1.5V 1.5V VOL + 0.3V VOH − 0.3V 2.7V trise and tfall 2.5V ± 0.2V VCC/2 VCC/2 VOL + 0.15V VOH − 0.15V www.fairchildsemi.com 4 74LCX02 Schematic Diagram Generic for LCX Family 5 www.fairchildsemi.com 74LCX02 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 6 74LCX02 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D 7 www.fairchildsemi.com 74LCX02 Low Voltage Quad 2-Input NOR Gate with 5V Tolerant Inputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com