74LVQ04

74LVQ04

  • 厂商:

    FAIRCHILD(仙童半导体)

  • 封装:

  • 描述:

    74LVQ04 - Low Voltage Hex Inverter - Fairchild Semiconductor

  • 详情介绍
  • 数据手册
  • 价格&库存
74LVQ04 数据手册
74LVQ04 Low Voltage Hex Inverter February 1992 Revised June 2001 74LVQ04 Low Voltage Hex Inverter General Description The LVQ04 contains six inverters. Features s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into 75Ω Ordering Code: Ordering Number 74LVQ04SC 74LVQ04SJ Package Number M14A M14D Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol IEEE/IEC Connection Diagram Pin Descriptions Pin Names An On Description Inputs Outputs © 2001 Fairchild Semiconductor Corporation DS011343 www.fairchildsemi.com 74LVQ04 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND ) Storage Temperature (TSTG) DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions (Note 2) Supply Voltage (VCC) Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Minimum Input Edge Rate (∆V/∆t) VIN from 0.8V to 2.0V VCC @ 3.0V 125 mV/ns Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float. 2.0V to 3.6V 0V to VCC 0V to VCC −40°C to +85°C DC Electrical Characteristics Symbol VIH VIL VOH Parameter Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage VOL Maximum Low Level Output Voltage IIN IOLD IOHD ICC VOLP VOLV VIHD VILD Maximum Input Leakage Current Minimum Dynamic (Note 4) Output Current Maximum Quiescent Supply Current Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Maximum High Level Dynamic Input Voltage Maximum Low Level Dynamic Input Voltage VCC (V) 3.0 3.0 3.0 3.0 3.0 3.0 3.6 3.6 3.6 3.6 3.3 3.3 3.3 3.3 0.8 −0.8 1.7 1.6 2.0 1.1 −1.1 2.0 0.8 0.002 TA = +25°C Typ 1.5 1.5 2.99 TA = −40°C to +85°C Guaranteed Limits 2.0 0.8 2.9 2.58 0.1 0.36 ±0.1 2.0 0.8 2.9 2.48 0.1 0.44 ±1.0 36 −25 20.0 V V V V V V µA mA mA µA V V V V VOUT = 0.1V or VCC − 0.1V VOUT = 0.1V or VCC − 0.1V IOUT = −50 µA VIN = VIL or VIH (Note 3) IOH = −12 mA IOUT = 50 µA VIN = VIL or VIH (Note 3) IOL = 12 mA VI = VCC, GND VOLD = 0.8V Max (Note 5) VOHD = 2.0V Min (Note 5) VIN = VCC or GND (Note 6)(Note 7) (Note 6)(Note 7) (Note 6)(Note 8) (Note 6)(Note 8) Units Conditions Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: Incident wave switching on transmission lines with impedances as low as 75Ω for commercial temperature range is guaranteed for 74LVQ. Note 6: Worst case package. Note 7: Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V; one output at GND. Note 8: Max number of Data Inputs (n) switching. (n − 1) inputs switching 0V to 3.3V. Input-under-test switching: 3.3V to threshold (VILD) 0V to threshold (VIHD) f = 1 MHz. www.fairchildsemi.com 2 74LVQ04 AC Electrical Characteristics TA = +25°C Symbol Parameter VCC (V) Min tPLH tPHL tOSHL tOSLH Propagation Delay Propagation Delay Output to Output Skew (Note 9) Data to Output 2.7 3.3 ± 0.3 2.7 3.3 ± 0.3 2.7 3.3 ± 0.3 1.5 1.5 1.5 1.5 CL = 50 pF Typ 5.4 4.5 5.4 4.5 1.0 1.0 Max 12.7 9.0 12.0 8.5 1.5 1.5 TA = −40° C to +85°C CL = 50 pF Min 1.0 1.0 1.0 1.0 Max 14.0 10.0 12.0 9.5 1.5 1.5 ns ns ns Units Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. Capacitance Symbol CIN CPD (Note 10) Note 10: CPD is measured at 10 MHz. Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 17 Units pF pF Conditions VCC = Open VCC = 3.3V 3 www.fairchildsemi.com 74LVQ04 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 4 74LVQ04 Low Voltage Hex Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 5 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com
74LVQ04
1. 物料型号 - 型号为74LVQ04,是低电压六反相器(Low Voltage Hex Inverter)。 - 订购代码如下: - 74LVQ04SC,封装为14-Lead Small Outline Integrated Circuit (SOIC),JEDEC MS-012,0.150 Narrow。 - 74LVQ04SJ,封装为14-Lead Small Outline Package (SOP),EIAJ TYPE II,5.3mm Wide。

2. 器件简介 - 74LVQ04包含六个反相器,适用于低功耗/低噪声3.3V应用,保证同时开关噪声水平和动态阈值性能,保证引脚对引脚偏斜交流性能,保证入射波开关入75Ω。

3. 引脚分配 - 输入引脚标记为“A”,输出引脚标记为“n”。

4. 参数特性 - 绝对最大额定值:供电电压(VCC)-0.5V至+7.0V DC,输入二极管电流(IIK)在V1=-0.5V时为-20mA,在V1=VCC+0.5V时为+20mA。 - 推荐工作条件:供电电压(VCC)2.0V至3.6V,输入电压(Vi)0V至VCC,输出电压(Vo)0V至VCC,工作温度(TA)-40°C至+85°C。

5. 功能详解 - 74LVQ04是一个六反相器,具有低功耗和低噪声特性,适合3.3V应用。它保证了同时开关噪声水平和动态阈值性能,以及引脚对引脚偏斜交流性能。

6. 应用信息 - 该器件适用于需要低功耗和低噪声的3.3V应用场合,如数字电路中的信号反转。

7. 封装信息 - 提供的封装类型包括14-Lead Small Outline Integrated Circuit (SOIC)和14-Lead Small Outline Package (SOP)。
74LVQ04 价格&库存

很抱歉,暂时无法提供与“74LVQ04”相匹配的价格&库存,您可以联系我们找货

免费人工找货