74LVX573MX

74LVX573 Low Voltage Octal Latch with 3-STATE Outputs June 1993 Revised April 2005 74LVX573 Low Voltage Octal Latch with 3-STATE Outputs General Description The LVX573 is a high-speed octal latch with buffered common Latch Enable (LE) and buffered common Output Enable (OE) inputs. The LVX573 is functionally identical to the LVX373 but with inputs and outputs on opposite sides of the package. The inputs tolerate up to 7V allowing interface of 5V systems to 3V systems. Features s Input voltage translation from 5V to 3V s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance Ordering Code: Order Number 74LVX573M 74LVX573SJ 74LVX573MTC Package Number M20B M20D MTC20 Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Logic Symbols Connection Diagram IEEE/IEC Pin Descriptions Pin Names D0–D7 LE OE O0–O7 Data Inputs Latch Enable Input 3-STATE Output Enable Input 3-STATE Latch Outputs Description © 2005 Fairchild Semiconductor Corporation DS011616 www.fairchildsemi.com 74LVX573 Functional Description The LVX573 contains eight D-type latches. When the enable (LE) input is HIGH, data on the Dn inputs enters the latches. In this condition the latches are transparent, i.e., a latch output will change state each time its D input changes. When LE is LOW the latches store the information that was present on the D inputs a setup time preceding the HIGH-to-LOW transition of LE. The 3-STATE buffers are controlled by the Output Enable (OE) input. When OE is LOW, the buffers are enabled. When OE is HIGH the buffers are in the high impedance mode but this does not interfere with entering new data into the latches. Truth Table Inputs OE L L L H H L Z X O0 Outputs D H L X X On H L O0 Z LE H H L X H IGH Voltage LOW Voltage High Impedance Immaterial Previous O0 before HIGH-to-LOW transition of Latch Enable Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 74LVX573 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Diode Current (IIK) VI 0.5V to 7.0V 20 mA 0.5V to 7V 20 mA 20 mA 0.5V to VCC  0.5V r25 mA r75 mA 65qC to 150qC 180 mW Recommended Operating Conditions (Note 2) Supply Voltage (VCC) Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Input Rise and Fall Time ('t/'V) 2.0V to 3.6V 0V to 5.5V 0V to VCC 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO VO 40qC to 85qC 0 ns/V to 100 ns/V 0.5V VCC  0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND) Storage Temperature (TSTG) Power Dissipation Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IOZ IIN ICC 3-STATE Output Off-State Current Input Leakage Current Quiescent Supply Current 3.6 3.6 VCC 2.0 3.0 3.6 2.0 3.0 3.6 2.0 3.0 3.0 2.0 3.0 3.0 3.6 1.9 2.9 2.58 0.0 0.0 0.1 0.1 0.36 2.0 3.0 TA Min 1.5 2.0 2.4 0.5 0.8 0.8 1.9 2.9 2.48 0.1 0.1 0.44 V VIN V 25qC Typ Max TA 40qC to 85qC Min 1.5 2.0 2.4 0.5 0.8 0.8 Max Units Conditions V V VIN VIH or VIL IOH IOH IOH VIH or VIL IOL IOL IOL VIN VOUT VIN VIN VIH or VIL VCC or GND 5.5V or GND VCC or GND 50 PA 50 PA 4 mA 50 PA 50 PA 4 mA r0.25 r0.1 4.0 r2.5 r1.0 40.0 PA PA PA Noise Characteristics (Note 3) Symbol VOLP VOLV VIHD VILD Parameter Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage tf 3ns) VCC (V) 3.3 3.3 3.3 3.3 TA Typ 0.5 25qC Limit 0.8 Units V V V V CL (pF) 50 50 50 50 0.5 0.8 2.0 0.8 Note 3: (Input tr 3 www.fairchildsemi.com 74LVX573 AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay Time Dn to On tPLH tPHL Propagation Delay Time LE to On tPZL tPZH 3-STATE Output Enable Time 3.3 r 0.3 tPLZ tPHZ tW tS tH tOSHL tOSLH 3-STATE Output Disable Time LE Pulse Width Setup Time Dn to LE Hold Time Dn to LE Output to Output Skew (Note 4) 2.7 3.3 r 0.3 2.7 3.3 r 0.3 2.7 3.3 r 0.3 2.7 3.3 r 0.3 2.7 2.3 |tPLHm  tPLHn|, tOSHL VCC (V) 2.7 3.3 r 0.3 2.7 3.3 r 0.3 2.7 Min TA 25qC Typ 7.6 10.1 5.9 8.4 8.2 10.7 6.4 8.9 7.8 10.3 6.1 8.6 12.1 10.1 Max 14.5 18.0 9.3 12.8 15.6 19.1 10.1 13.6 15.0 18.5 9.7 13.2 19.1 13.6 TA 40qC to 85qC Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 7.5 5.0 5.0 3.5 1.5 1.5 Max 17.5 21.0 11.0 14.5 18.5 22.0 12.0 15.5 18.5 22.0 12.0 15.5 22.0 15.5 Units CL ns CL CL CL CL ns CL CL CL CL ns CL CL CL ns ns ns ns CL CL Conditions 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 15 pF 50 pF 15 pF, RL 50 pF, RL 15 pF, RL 50 pF, RL 50 pF, RL 50 pF, RL 1 k: 1 k: 1 k: 1 k: 1 k: 1 k: 6.5 5.0 5.0 3.5 1.5 1.5 1.5 1.5 |tPHLm  tPHLn|. 1.5 1.5 ns CL 50 pF Note 4: Parameter guaranteed by design. tOSLH Capacitance Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (Note 5) Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Parameter TA Min 25qC Typ 4 6 27 Max 10 TA 40qC to 85qC Min Max 10 Units pF pF pF www.fairchildsemi.com 4 74LVX573 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B 5 www.fairchildsemi.com 74LVX573 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D www.fairchildsemi.com 6 74LVX573 Low Voltage Octal Latch with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 7 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com