74VCX162838MTD

74VCX162838 Low Voltage 16-Bit Selectable Register/Buffer with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in the Outputs August 1997 Revised July 2000 74VCX162838 Low Voltage 16-Bit Selectable Register/Buffer with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in the Outputs General Description The VCX162838 contains sixteen non-inverting selectable buffered or registered paths. The device can be configured to operate in a registered, or flow through buffer mode by utilizing the register enable (REGE) and Clock (CP) signals. The device operates in a 16-bit word wide mode. All outputs can be placed into 3-State through the use of the OE pin. These devices are ideally suited for buffered or registered 168 pin and 200 pin SDRAM DIMM memory modules. The 74VCX162838 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The VCX162838 is also designed with 26Ω series resistors in the outputs. This design reduces line noise in applications such as memory address drivers, clock drivers, and bus transceivers/transmitters. The 74VCX162838 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. Features s Compatible with PC100 and PC133 DIMM module specifications s 1.65V–3.6V VCC supply operation s 3.6V tolerant inputs and outputs s 26Ω series resistors in the outputs s tPD (CP to On) 3.9 ns max for 3.0V to 3.6V VCC 5.4 ns max for 2.3V to 2.7V VCC 9.8 ns max for 1.65V to 1.95V VCC s Power-off high impedance inputs and outputs s Supports live insertion and withdrawal (Note 1) s Static Drive (IOH/IOL) ±12 mA @ 3.0V VCC ±8 mA @ 2.3V VCC ±3 mA @ 1.65V VCC s Uses patented noise/EMI reduction circuitry s Latch-up performance exceeds 300 mA s ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor. The minimum value of the resistor is determined by the current -sourcing capability of the driver. Ordering Code: Ordering Code 74VCX162838MTD Package Number MTD48 Package Descriptions 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Pin Descriptions Pin Names OE I0–I15 O0–O15 CP REGE Description Output Enable Input (Active LOW) Inputs Outputs Clock Pulse Input Register Enable Input © 2000 Fairchild Semiconductor Corporation DS500045 www.fairchildsemi.com 74VCX162838 Connection Diagram Truth Table Inputs CP REGE H H L L X In H L H L X OE L L L L H Outputs On H L H L Z ↑ ↑ X X X H = H IGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, inputs may not float) Z = High Impedance Functional Description The 74VCX162838 consists of sixteen selectable noninverting buffers or registers with word wide controls. Mode functionality is selected through operation of the CP and REGE pin as shown by the truth table. When REGE is held at a logic “1” the device operates as a 16-bit register. Data is transferred from In to On on the rising edge of the CP pin. When the REGE pin is held at a logic “0” the device operates in a flow through mode and data propagates directly from the I to the O outputs. All outputs can be 3-stated by holding the OE pin at a logic “1”. Logic Diagram www.fairchildsemi.com 2 74VCX162838 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) DC Input Voltage (VI) Output Voltage (VO) Outputs 3-STATE Outputs Active (Note 3) DC Input Diode Current (IIK) VI < 0V DC Output Diode Current (IOK) VO < 0 V VO > VCC DC Output Source/Sink Current (IOH/IOL) DC VCC or GND Current per Supply Pin (ICC or GND) Storage Temperature Range (TSTG) −0.5V to +4.6V −0.5V to +4.6V −0.5V to +4.6V −0.5V to VCC +0.5V −50 mA −50 mA +50 mA ±50 mA ±100 mA −65°C to +150°C Recommended Operating Conditions (Note 4) Power Supply Operating Data Retention Only Input Voltage Output Voltage (VO) Output in Active States Output in “OFF” State Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 2.3V Free Air Operating Temperature (TA) Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused inputs must be held HIGH or LOW. 1.65V to 3.6V 1.2V to 3.6V −0.3V to +3.6V 0V to VCC 0.0V to 3.6V ±12 mA ±8 mA ±3 mA −40°C to +85°C DC Electrical Characteristics (2.7V < VCC ≤ 3.6V) Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage IOH = −100 µA IOH = −6 mA IOH = −8 mA IOH = −12 mA VOL LOW Level Output Voltage IOL = 100 µA IOL = 6 mA IOL = 8 mA IOL = 12 mA II IOZ IOFF ICC ∆ICC Input Leakage Current 3-STATE Output Leakage Power-OFF Leakage Current Quiescent Supply Current Increase in ICC per Input 0 ≤ VI ≤ 3.6V 0 ≤ VO ≤ 3.6V VI = V IH or VIL 0 ≤ (VI, VO) ≤ 3.6V VI = V CC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 5) VIH = VCC −0.6V Note 5: Outputs disabled or 3-STATE only. Conditions VCC (V) 2.7–3.6 2.7–3.6 2.7–3.6 2.7 3.0 3.0 2.7–3.6 2.7 3.0 3.0 2.7–3.6 2.7–3.6 0 2.7–3.6 2.7–3.6 2.7–3.6 Min 2.0 Max Units V 0.8 VCC − 0.2 2.2 2.4 2.2 0.2 0.4 0.55 0.8 ±5.0 ±10 10 20 ±20 750 V V V V V V V V V µA µA µA µA µA µA 3 www.fairchildsemi.com 74VCX162838 DC Electrical Characteristics (2.3V ≤ VCC ≤ 2.7V) Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage IOH = −100 µA IOH = −4 mA IOH = −6 mA IOH = −8 mA VOL LOW Level Output Voltage IOL = 100 µA IOL = 6 mA IOL = 8 mA II IOZ IOFF ICC Input Leakage Current 3-STATE Output Leakage Power-OFF Leakage Current Quiescent Supply Current 0 ≤ VI ≤ 3.6V 0 ≤ VO ≤ 3.6V VI = VIH or VIL 0 ≤ (VI, VO) ≤ 3.6V VI = VCC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 6) Note 6: Outputs disabled or 3-STATE only. Conditions VCC (V) 2.3–2.7 2.3–2.7 2.3–2.7 2.3 2.3 2.3 2.3–2.7 2.3 2.3 2.3–2.7 2.3–2.7 0 2.3–2.7 2.3–2.7 Min 1.6 Max Units V 0.7 VCC − 0.2 2.0 1.8 1.7 0.2 0.4 0.6 ±5.0 ±10 10 20 ±20 V V V V V V V V µA µA µA µA µA DC Electrical Characteristics (1.65V ≤ VCC < 2.3V) Symbol VIH VIL VOH VOL II IOZ IOFF ICC Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage Input Leakage Current 3-STATE Output Leakage Power-OFF Leakage Current Quiescent Supply Current IOH = −100 µA IOH = −3 mA IOL = 100 µA IOL = 3 mA 0 ≤ VI ≤ 3.6V 0 ≤ VO ≤ 3.6V VI = VIH or VIL 0 ≤ (VI, VO) ≤ 3.6V VI = VCC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 7) Note 7: Outputs disabled or 3-STATE only. Conditions VCC (V) 1.65 - 2.3 1.65 - 2.3 1.65 - 2.3 1.65 1.65 - 2.3 1.65 1.65 - 2.3 1.65 - 2.3 0 1.65 - 2.3 1.65 - 2.3 Min 0.65 × VCC Max Units V 0.35 × VCC VCC − 0.2 1.25 0.2 0.3 ±5.0 ±10 10 20 ±20 V V V V V µA µA µA µA µA www.fairchildsemi.com 4 74VCX162838 AC Electrical Characteristics (Note 8) TA = −40°C to +85°C, CL = 30 pF, RL = 500Ω Symbol Parameter VCC = 3.3V ± 0.3V Min fMAX tPHL, tPLH tPHL, tPLH tPHL, tPLH tPZL, tPZH tPLZ, tPHZ tS tH tW tOSHL tOSLH Maximum Clock Frequency Prop Delay In to On (REGE = 0) Prop Delay CP to On (REGE = 1) Prop Delay REGE to On Output Enable Time Output Disable Time Setup Time Hold Time Pulse Width Output to Output Skew (Note 9) 250 0.8 0.8 0.8 0.8 0.8 1.0 0.7 1.5 0.5 3.5 3.9 3.9 4.0 4.1 Max VCC = 2.5V ± 0.2V Min 200 1.0 1.0 1.0 1.0 1.0 1.0 0.7 1.5 0.5 4.9 5.4 5.4 5.7 4.6 Max VCC = 1.8V Min 100 1.5 1.5 1.5 1.5 1.5 2.5 1.0 4.0 0.75 9.8 9.8 9.8 9.8 8.3 Max MHz ns ns ns ns ns ns ns ns ns Units Note 8: For CL = 50PF, add approximately 300 ps to the AC maximum specification. Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Extended AC Electrical Characteristics (Note 10) TA = −0°C to +85°C, RL = 500Ω VCC = 3.3V ± 0.3V Symbol Parameter Min tPHL, tPLH tPHL, tPLH tPHL, tPLH tPZL, tPZH tPLZ, tPHZ tS tH Prop Delay In to On (REGE = 0) Prop Delay CP to On (REGE = 1) Prop Delay REGE to On Output Enable Time Output Disable Time Setup Time Hold Time 1.0 1.4 1.0 1.0 1.0 1.0 0.7 CL = 50 pF Max 3.8 4.2 4.2 4.3 4.4 ns ns ns ns ns ns ns Units Note 10: This parameter is guaranteed by characterization but not tested. Dynamic Switching Characteristics Symbol VOLP Parameter Quiet Output Dynamic Peak VOL Conditions CL = 30 pF, VIH = VCC, VIL = 0V VCC (V) 1.8 2.5 3.3 VOLV Quiet Output Dynamic Valley VOL CL = 30 pF, VIH = VCC, VIL = 0V 1.8 2.5 3.3 VOHV Quiet Output Dynamic Valley VOH CL = 30 pF, VIH = VCC, VIL = 0V 1.8 2.5 3.3 TA = +25°C Typical 0.15 0.25 0.35 −0.15 −0.25 −0.35 1.55 2.05 2.65 V V V Units Capacitance Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance Parameter Conditions VCC = 1.8V, 2.5V or 3.3V, VI = 0V or VCC VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V VI =0V or VCC, f = 10 MHz, V CC = 1.8V, 2.5V or 3.3V TA = +25°C Typical 6 7 20 Units pF pF pF 5 www.fairchildsemi.com 74VCX162838 AC Loading and Waveforms TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ SWITCH Open 6V at VCC = 3.3 ± 0.3V; VCC x 2 at VCC = 2.5 ± 0.2V; 1.8V ± 0.15V GND FIGURE 1. AC Test Circuit FIGURE 2. Waveform for Inverting and Non-Inverting Functions FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 4. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic FIGURE 5. Propagation Delay, Pulse Width and trec Waveforms Symbol Vmi Vmo VX VY FIGURE 6. Setup Time, Hold Time and Recovery Time for Low Voltage Logic VCC 3.3V ± 0.3V 1.5V 1.5V VOL +0.3V VOH −0.3V 2.5V ± 0.2V VCC/2 VCC/2 VOL +0.15V VOH −0.15V 1.8V ± 0.15V VCC/2 VCC/2 VOL +0.15V VOH −0.15V www.fairchildsemi.com 6 74VCX162838 Low Voltage 16-Bit Selectable Register/Buffer with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in the Outputs Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD48 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 7 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com