74VHC08MTCX_NL

74VHC08 Quad 2-Input AND Gate May 2007 74VHC08 Quad 2-Input AND Gate Features ■ High Speed: tPD = 4.3ns (Typ.) at TA = 25°C ■ High noise immunity: VNIH = VNIL = 28% VCC (Min.) ■ Power down protection is provided on all inputs ■ Low power dissipation: ICC = 2µA (Max.) @ TA = 25°C ■ Low noise: VOLP = 0.8V (Max.) ■ Pin and function compatible with 74HC08 tm General Description The VHC08 is an advanced high speed CMOS 2 Input AND Gate fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The internal circuit is composed of 4 stages including buffer output, which provide high noise immunity and stable output. An input protection circuit insures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery backup. This circuit prevents device destruction due to mismatched supply and input voltages. Ordering Information Order Number 74VHC08M 74VHC08MX_NL(1) 74VHC08SJ 74VHC08MTC 74VHC08MTCX_NL(1) Package Number M14A M14A M14D MTC14 MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering number. Pb-Free package per JEDEC J-STD-020B. Note: 1. Device available in Tape and Reel only. ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 74VHC08 Quad 2-Input AND Gate Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names An, Bn On Inputs Outputs Description Truth Table A L L H H B L H L H O L L L H ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 2 74VHC08 Quad 2-Input AND Gate Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN VOUT IIK IOK IOUT ICC TSTG TL Supply Voltage DC Input Voltage DC Output Voltage Input Diode Current Output Diode Current DC Output Current DC VCC / GND Current Storage Temperature Parameter Rating –0.5V to +7.0V –0.5V to +7.0V –0.5V to VCC + 0.5V –20mA ±20mA ±25mA ±50mA –65°C to +150°C 260°C Lead Temperature (Soldering, 10 seconds) Recommended Operating Conditions(2) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VIN VOUT TOPR tr , tf Supply Voltage Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time, VCC = 3.3V ± 0.3V VCC = 5.0V ± 0.5V Parameter Rating 2.0V to +5.5V 0V to +5.5V 0V to VCC –40°C to +85°C 0ns/V ∼ 100ns/V 0ns/V ∼ 20ns/V Note: 2. Unused inputs must be held HIGH or LOW. They may not float. ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 3 74VHC08 Quad 2-Input AND Gate DC Electrical Characteristics TA = 25°C Symbol VIH VIL VOH TA = –40°C to +85°C Max. Min. 1.50 0.7 x VCC 0.50 0.3 x VCC 0.50 0.3 x VCC 1.9 2.9 4.4 2.48 3.80 V V Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.0 3.0–5.5 2.0 3.0–5.5 2.0 3.0 4.5 3.0 4.5 Conditions Min. 1.50 0.7 x VCC Typ. Max. Units V VIN = VIH or VIL IOH = –50µA 1.9 2.9 4.4 2.0 3.0 4.5 IOH = –4mA IOH = –8mA VIN = VIH or VIL IOL = 50µA 2.58 3.94 0.0 0.0 0.0 0.1 0.1 0.1 0.36 0.36 ±0.1 2.0 VOL LOW Level Output Voltage 2.0 3.0 4.5 3.0 4.5 0.1 0.1 0.1 0.44 0.44 ±1.0 20.0 V IOL = 4mA IOL = 8mA VIN = 5.5V or GND VIN = VCC or GND IIN ICC Input Leakage Current Quiescent Supply Current 0–5.5 5.5 µA µA Noise Characteristics TA = 25°C Symbol VOLP (3) Parameter Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage VCC (V) 5.0 5.0 5.0 5.0 Conditions CL = 50pF CL = 50pF CL = 50pF CL = 50pF Typ. 0.3 –0.3 Limits 0.8 –0.8 3.5 1.5 Units V V V V VOLV(3) VIHD(3) VILD(3) Note: 3. Parameter guaranteed by design. ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 4 74VHC08 Quad 2-Input AND Gate AC Electrical Characteristics TA = 25°C Symbol tPHL, tPLH TA = –40°C to +85°C Min. 1.0 1.0 1.0 1.0 Parameter Propagation Delay VCC (V) 3.3 ± 0.3 5.0 ± 0.5 Conditions CL = 15pF CL = 50pF CL = 15pF CL = 50pF VCC (4) = Open Min. Typ. 6.2 8.7 4.3 5.8 4 18 Max. 8.8 12.3 5.9 7.9 10 Max. 10.5 14.0 7.0 9.0 10 Units ns ns pF pF CIN CPD Input Capacitance Power Dissipation Capacitance Note: 4. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD • VCC • fIN + ICC / 4 (per gate). ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 5 74VHC08 Quad 2-Input AND Gate Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 6 74VHC08 Quad 2-Input AND Gate Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 7 74VHC08 Quad 2-Input AND Gate Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package MTC14 ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 8 74VHC08 Quad 2-Input AND Gate TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™ 2 E CMOS™ ® EcoSPARK EnSigna™ FACT Quiet Series™ ® FACT ® FAST FASTr™ FPS™ ® FRFET GlobalOptoisolator™ GTO™ HiSeC™ ® i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ Motion-SPM™ MSX™ MSXPro™ OCX™ OCXPro™ ® OPTOLOGIC ® OPTOPLANAR PACMAN™ PDP-SPM™ POP™ ® Power220 ® Power247 PowerEdge™ PowerSaver™ Power-SPM™ ® PowerTrench Programmable Active Droop™ ® QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™ ® SPM STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SyncFET™ TCM™ ® The Power Franchise ™ TinyBoost™ TinyBuck™ ® TinyLogic TINYOPTO™ TinyPower™ TinyWire™ TruTranslation™ µSerDes™ ® UHC UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I26 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. No Identification Needed Full Production Obsolete Not In Production ©1992 Fairchild Semiconductor Corporation 74VHC08 Rev. 1.3 www.fairchildsemi.com 9