74VHC139MTC

74VHC139 Dual 2-to-4 Decoder/Demultiplexer November 1992 Revised April 1999 74VHC139 Dual 2-to-4 Decoder/Demultiplexer General Description The VHC139 is an advanced high speed CMOS Dual 2-to4 Decoder/Demultiplexer fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The active LOW enable input can be used for gating or it can be used as a data input for demultiplexing applications. When the enable input is held HIGH, all four outputs are fixed at a HIGH logic level independent of the other inputs. An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages. Features s High Speed: tPD = 5.0 ns (typ) at TA = 25°C s Low power dissipation: ICC = 4 µA (Max.) at TA = 25°C s High noise immunity: VNIH = VNIL = 28% VCC (Min.) s Power down protection is provided on all inputs s Pin and function compatible with 74HC139 Ordering Code: Order Number 74VHC139M 74VHC139SJ 74VHC139MTC 74VHC139N Package Number M16A M16D MTC16 N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Pin Description Pin Names A0 , A1 E O0–O3 Description Address Inputs Enable Inputs Outputs Truth Table Inputs E H L L L L A0 X L H L H A1 X L L H H O0 H L H H H Outputs O1 H H L H H O2 H H H L H O3 H H H H L H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial © 1999 Fairchild Semiconductor Corporation DS011521.prf www.fairchildsemi.com 74VHC139 Logic Symbols Functional Description The VHC139 is a high-speed dual 2-to-4 decoder/demultiplexer. The device has two independent decoders, each of which accepts two binary weighted inputs (A0–A1) and provides four mutually exclusive active-LOW outputs (O0–O3). Each decoder has an active-LOW enable (E). When E is HIGH all outputs are forced HIGH. The enable can be used as the data input for a 4-output demultiplexer application. Each half of the VHC139 generates all four minterms of two variables. These four minterms are useful in some applications, replacing multiple gate functions as shown in Figure 1, and thereby reducing the number of packages required in a logic network. IEEE/IEC FIGURE 1. Gate Functions (Each Half) Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 74VHC139 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) Input Diode Current (IIK) Output Diode Current (IOK) DC Output Current (IOUT) DC VCC/GND Current (ICC) Storage Temperature (TSTG) Lead Temperature (TL) (Soldering, 10 seconds) 260°C −0.5V to +7.0V −0.5V to +7.0V −0.5V to VCC + 0.5V −20 mA ±20 mA ±25 mA ±75 mA −65°C to +150°C Recommended Operating Conditions (Note 2) Supply Voltage (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TOPR) Input Rise and Fall Time (tr, tf) VCC = 3.3V ± 0.3V VCC = 5.0V ± 0.5V 0 ∼ 100 ns/V 0 ∼ 20 ns/V 2.0V to +5.5V 0V to +5.5V 0V to VCC −40°C to +85°C Note 1: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.0 3.0 − 5.5 2.0 3.0 − 5.5 2.0 3.0 4.5 3.0 4.5 VOL LOW Level Output Voltage 2.0 3.0 4.5 3.0 4.5 IIN ICC Input Leakage Current Quiescent Supply Current 0 − 5.5 5.5 1.9 2.9 4.4 2.58 3.94 0.0 0.0 0.0 0.1 0.1 0.1 0.36 0.36 ±0.1 4.0 2.0 3.0 4.5 T A = 2 5 °C Min 1.50 0.7 VCC 0.50 0.3 VCC 1.9 2.9 4.4 2.48 3.80 0.1 0.1 0.1 0.44 0.44 ±1.0 40.0 V µA µA IOL = 4 mA IOL = 8 mA VIN = 5.5V or GND VIN = VCC or GND V V IOH = −4 mA IOH = −8 mA VIN = VIH IOL = 50 µA or VIL V Typ Max TA = −40°C to +85°C Min 1.50 0.7 VCC 0.50 0.3 VCC Max Units V V VIN = VIH IOH = −50 µA or VIL Conditions AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay An to On 5.0 ± 0.5 tPLH tPHL Propagation Delay En to On 5.0 ± 0.5 CIN CPD Input Capacitance Power Dissipation Capacitance 3.3 ± 0.3 VCC (V) 3.3 ± 0.3 TA = 25°C Min Typ 7.2 9.7 5.0 6.5 6.4 8.9 4.4 5.9 4 26 Max 11.0 14.5 7.2 9.2 9.2 12.7 6.3 8.3 10 TA = −40°C to +85°C Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 13.0 16.5 8.5 10.5 11.0 14.5 7.5 9.5 10 Units Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF VCC = Open (Note 3) ns ns ns ns pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD * VCC * fIN + ICC/2 (per decoder). 3 www.fairchildsemi.com 74VHC139 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D www.fairchildsemi.com 4 74VHC139 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 5 www.fairchildsemi.com 74VHC139 Dual 2-to-4 Decoder/Demultiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N16E LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.