BC547B

BC547 / BC547A / BC547B / BC547C Discrete POWER & Signal Technologies BC547 BC547A BC547B BC547C E B TO-92 C NPN General Purpose Amplifier This device is designed for use as general purpose amplifiers and switches requiring collector currents to 300 mA. Sourced from Process 10. See PN100A for characteristics. Absolute Maximum Ratings* Symbol VCEO VCES VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25°C unless otherwise noted Parameter Value 45 50 6.0 500 -55 to +150 Units V V V mA °C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RθJC RθJA TA = 25°C unless otherwise noted Characteristic Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Max BC547 / A / B / C 625 5.0 83.3 200 Units mW mW/°C °C/W °C/W © 1 997 Fairchild Semiconductor Corporation 547ABC, Rev B BC547 / BC547A / BC547B / BC547C NPN General Purpose Amplifier (continued) Electrical Characteristics Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)CES V(BR)EBO ICBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current IC = 1.0 mA, IB = 0 IC = 10 µ A, IE = 0 IC = 10 µ A, IE = 0 IE = 10 µ A, IC = 0 VCB = 30 V, IE = 0 VCB = 30 V, IE = 0, TA = +150 °C 45 50 50 6.0 15 5.0 V V V V nA µA ON CHARACTERISTICS hFE DC Current Gain VCE = 5.0 V, IC = 2.0 mA 547 547A 547B 547C 110 110 200 420 800 220 450 800 0.25 0.60 0.70 0.77 VCE(sat) VBE(on) Collector-Emitter Saturation Voltage Base-Emitter On Voltage IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5.0 mA VCE = 5.0 V, IC = 2.0 mA VCE = 5.0 V, IC = 10 mA 0.58 V V V V SMALL SIGNAL CHARACTERISTICS hfe NF Small-Signal Current Gain Noise Figure IC = 2.0 mA, VCE = 5.0 V, f = 1.0 kHz VCE = 5.0 V, IC = 200 µ A, RS = 2.0 kΩ, f = 1.0 kHz, BW = 200 Hz 125 900 10 dB