BCW89

BCW89 BCW89 PNP General Purpose Amplifier • This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 300mA. • Sourced from process 68. 3 2 1 SOT-23 Mark: H3 1. Base 2. Emitter 3. Collector Absolute Maximum Ratings * TC=25°C unless otherwise noted Symbol VCEO VCES VEBO IC TJ, Tstg Parameter Collector-Emitter Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector current Junction and Storage Temperature - Continuous Value -60 -60 -5.0 -500 -55 ~ +150 Units V V V mA °C * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics TC=25°C unless otherwise noted Symbol Parameter Test Condition IC = -10µA, IE = 0 IC = -2.0mA, IB = 0 IC = -10µA, IE = 0 IC = -10µA, IC = 0 VCB = -20V, IE = 0 VCB = -20V, IE = 0, TA = +100°C VCE = -5.0V, IC = -2.0mA IC = -10mA, IB = -0.5mA VCE = -5.0V, IC = -2.0mA VCE = -5.0V, IC = -200µA RS = 2.0kΩ, f = 1.0kHz BW = 200Hz -0.6 120 Min. -80 -60 -60 -5.0 -100 -10 260 -0.3 -0.75 10 V V dB Max. Units V V V V nA µA Off Characteristics Collector-Base Breakdown Voltage V(BR)CBO V(BR)CEO V(BR)CES V(BR)EBO ICBO Collector-Emitter Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current On Characteristics hFE VCE(sat) VBE(on) NF DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage Noise Figure Small Signal Characteristics Thermal Characteristics TA=25°C unless otherwise noted Symbol PD RθJA Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient Max. 350 2.8 357 Units mW mW/°C °C/W ©2003 Fairchild Semiconductor Corporation Rev. A, May 2003 BCW89 Package Dimensions SOT-23 Dimensions in Millimeters ©2003 Fairchild Semiconductor Corporation Rev. A, May 2003 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ DISCLAIMER ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TruTranslation™ UHC™ UltraFET® VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2003 Fairchild Semiconductor Corporation Rev. I2