BDW23A

BDW23/A/B/C BDW23/A/B/C Hammer Drivers, Audio Amplifiers Applications • Power Darlington TR • Complement to BDW24, BDW24A, BDW24B and BDW24C respectively 1 TO-220 2.Collector 3.Emitter 1.Base NPN Epitaxial Silicon Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage : BDW23 : BDW23A : BDW23B : BDW23C VCEO Collector-Emitter Voltage : BDW23 : BDW23A : BDW23B : BDW23C Emitter-Base Voltage Collector Current (DC) *Collector Current (Pulse) Base Current Collector Dissipation (TC=25°C) Junction Temperature Storage Temperature 45 60 80 100 45 60 80 100 5 6 8 0.2 50 150 - 65 ~ 150 V V V V V V V V V A A A W °C °C Value Units VEBO IC ICP IB PC TJ TSTG ©2000 Fairchild Semiconductor International Rev. A, February 2000 BDW23/A/B/C Electrical Characteristics TC=25°C unless otherwise noted Symbol VCEO(sus) Parameter Collector-Emitter Sustaining Voltage : BDW23 : BDW23A : BDW23B : BDW23C Collector Cut-off Current : BDW23 : BDW23A : BDW23B : BDW23C ICEO Collector Cut-off Current : BDW23 : BDW23A : BDW23B : BDW23C IEBO hFE Emitter Cut-off Current * DC Current Gain VCE = 22V, IB = 0 VCE = 30V, IB = 0 VCE = 40V, IB = 0 VCE = 50V, IB = 0 VEB = 5V, IC = 0 VCE = 3V, IC = 1A VCE = 3V, IC = 2A VCE = 3V, IC = 6A IC = 2A, IB = 8mA IC = 6A, IB = 60mA IC = 2A, IB = 8mA VCE = 3V, IC = 1A VCE = 3V, IC = 6A IF = 2A 1000 750 100 500 500 500 500 2 20000 2 3 2.5 2.5 3 1.8 V V V V V V µA µA µA µA mA VCB = 45V, IE = 0 VCB = 60V, IE = 0 VCB = 80V, IE = 0 VCB = 100V, IE = 0 200 200 200 200 µA µA µA µA Test Condition IC = 100mA, IB = 0 Min. 45 60 80 100 Typ. Max. Unit s V V V V ICBO VCE(sat) VBE(sat) VBE(on) VF * Collector-Emitter Saturation Voltage * Base-Emitter Saturation Voltage * Base-Emitter ON Voltage * Parallel Diode Forward Voltage * Pulse Test: PW =300µs, duty Cycle =1.5% Pulsed ©2000 Fairchild Semiconductor International Rev. A, February 2000 BDW23/A/B/C Typical Characteristics 10000 8.0 VCE = 3V 7.5 7.0 VCE = 3V IC[A], COLLECTOR CURRENT 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 hFE, DC CURRENT GAIN 1000 100 0.1 1 10 0.0 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 IC[A], COLLECTOR CURRENT VBE[V], BASE-EMITTER VOLTAGE Figure 1. DC current Gain Figure 2. Collector-Emitter Saturation Voltage 100 VCE(sat)[V], SATURATION VOLTAGE 2.4 IC = 250 IB 2.0 IC[A], COLLECTOR CURRENT 10 IC(max). Pulsed IC(max). Continuous 1.6 10µ s 1.2 100µ s DC 0.8 1 0.4 BDW23 BDW23A BDW23B BDW23C 0.1 1 10 1ms 10ms 0.0 0.1 1 10 100 1000 IC[A], COLLECTOR CURRENT VCE [V], COLLECTOR-EMITTER VOLTAGE Figure 3. Base-Emitter On Voltage Figure 4. Safe Operating Area 80 70 PC[W], POWER DISSIPATION 60 50 40 30 20 10 0 0 25 50 o 75 100 125 150 175 200 T C[ C], CASE TEMPERATURE Figure 5. Power Derating ©2000 Fairchild Semiconductor International Rev. A, February 2000 BDW23/A/B/C Package Demensions TO-220 9.90 ±0.20 1.30 ±0.10 2.80 ±0.10 4.50 ±0.20 (8.70) ø3.60 ±0.10 (1.70) 1.30 –0.05 +0.10 9.20 ±0.20 (1.46) 13.08 ±0.20 (1.00) (3.00) 15.90 ±0.20 1.27 ±0.10 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP [2.54 ±0.20] 10.08 ±0.30 18.95MAX. (3.70) (45° ) 0.50 –0.05 +0.10 2.40 ±0.20 10.00 ±0.20 Dimensions in Millimeters ©2000 Fairchild Semiconductor International Rev. A, February 2000 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOS™ FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ DISCLAIMER HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench® QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2000 Fairchild Semiconductor International Rev. E