BSR18A
BSR18A
C
E
SOT-23
Mark: T92
B
PNP General Purpose Amplifier
This device is designed as a general purpose amplifier and switching applications at collector currents of 10 µA to 100 mA. Sourced from Process 66.
Absolute Maximum Ratings*
Symbol
VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous
TA = 25°C unless otherwise noted
Parameter
Value
40 40 5.0 200 -55 to +150
Units
V V V mA °C
3
Operating and Storage Junction Temperature Range
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors.
Thermal Characteristics
Symbol
PD RθJA
TA = 25°C unless otherwise noted
Characteristic
Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient
Max
*BSR18A 350 2.8 357
Units
mW mW/°C °C/W
*Device mounted on FR-4 PCB 40 mm X 40 mm X 1.5 mm.
1997 Fairchild Semiconductor Corporation
BSR18A
PNP General Purpose Amplifier
(continued)
Electrical Characteristics
Symbol Parameter
TA = 25°C unless otherwise noted
Test Conditions
Min
Max
Units
OFF CHARACTERISTICS
V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Cutoff Current Emitter-Cutoff Current IC = 10 µA, IB = 0 IC = 1.0 mA, IE = 0 IE = 10 µA, IC = 0 VCB = 30 V VEB = 3.0 V, IC = 0 40 40 5.0 50 50 V V V nA nA
ON CHARACTERISTICS*
hFE DC Current Gain IC = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 50 mA, VCE = 1.0 V IC = 100 mA, VCE = 1.0 V IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA 60 80 100 60 30 300
VCE(sat) VBE(sat)
Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage
0.65
0.25 0.4 0.85 0.95
V V V V
SMALL SIGNAL CHARACTERISTICS
fT Ccb Ceb hie hfe hoe Transition Frequency Collector-Base Capacitance Emitter-Base Capacitance Input Impedance Small-Signal Current Gain Output Admittance IC = 10 mA, VCE = 20, f = 100 MHz VCB = 5.0 V, IE = 0, f = 100 kHz VEB = 0.5 V, IC = 0, f = 100 kHz VCE= 10 V,IC= 1.0 mA,f=1.0 kHz VCE= 10 V,IC= 1.0 mA,f=1.0 kHz VCE= 10 V,IC= 1.0 mA,f=1.0 kHz 2.0 100 3.0 250 4.5 10 12 400 60 µS MHz pF pF kΩ
SWITCHING CHARACTERISTICS
td tr ts tf Delay Time Rise Time Storage Time Fall Time IC = 10 mA, IB1 = 1.0 mA, VEB = 0.5 V IC = 10 mA, IBon = IBoff = 1.0 mA 35 35 275 75 ns ns ns ns
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 0.01%
NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.
Spice Model
PNP (Is=1.41f Xti=3 Eg=1.11 Vaf=18.7 Bf=180.7 Ne=1.5 Ise=0 Ikf=80m Xtb=1.5 Br=4.977 Nc=2 Isc=0 Ikr=0 Rc=2.5 Cjc=9.728p Mjc=.5776 Vjc=.75 Fc=.5 Cje=8.063p Mje=.3677 Vje=.75 Tr=33.42n Tf=179.3p Itf=.4 Vtf=4 Xtf=6 Rb=10)
BSR18A
PNP General Purpose Amplifier
(continued)
Typical Characteristics
V CESAT - COLLECTOR EMITTER VOLTAGE (V)
h F E - TYPICAL PULSED CURRENT GAIN
Typical Pulsed Current Gain vs Collector Current
250
V CE = 1 .0V
125 °C
Collector-Emitter Saturation Voltage vs Collector Current
0.3 0.25 0.2 0.15 0.1
125°C 25 °C
β = 10
200
150
25 °C
100
- 40 °C
0.05 0
- 40 °C
50 0.1
0.2
0.5 1 2 5 10 20 I C - COLLECTOR CURRE NT (mA)
50
100
1
10 100 I C - COLLECTOR CURRENT (mA)
200
VBE( ON)- BASE EMITTER ON VOLTAGE (V)
V BESAT - BASE EM ITTE R VOLTAGE (V)
Base-Emitter Saturation Voltage vs Collector Current
1 0.8
25 °C
Base Emitter ON Voltage vs Collector Current
1 0.8
- 40 °C
β = 10
- 40 °C
0.6 0.4 0.2 0
125 °C
0.6 0.4 0.2 0 0.1
25 °C 125 °C
3
V CE = 1V
1
10 100 I C - COLLECTOR CURRE NT (mA)
200
1 10 I C - COLLECTOR CURRENT (mA)
25
Collector-Cutoff Current vs Ambient Temperature
I CBO - COLLE CTOR CURRENT (nA) 100 V 10
CB
Common-Base Open Circuit Input and Output Capacitance vs Reverse Bias Voltage
10
C obo
= 25V CAPACITANCE (pF)
8 6 4 2 0 0.1
C ibo
1
0.1
0.01 25
50 75 100 TA - AMBIE NT TEMP ERATURE (° C)
125
1 REVERSE BIAS VOLTAGE (V)
10
BSR18A
PNP General Purpose Amplifier
(continued)
Typical Characteristics
(continued)
Noise Figure vs Frequency
6 V CE = 5.0V NF - NOISE FIGURE (dB) 5 4 3 2 1 0 0.1
I C = 100 µA, R S = 200 Ω
Noise Figure vs Source Resistance
12 NF - NOISE FIGURE (dB) 10 8 6 4
I C = 100 µA I C = 1.0 mA
V CE = 5.0V f = 1.0 kHz
I C = 1.0 mA, R S = 200Ω I C = 100 µA, R S = 2.0 kΩ
2 0 0.1
1 10 f - FREQUENCY (kHz)
100
1 10 R S - SOURCE RESISTANCE ( kΩ )
100
Switching Times vs Collector Current
500
ts
Turn On and Turn Off Times vs Collector Current
500
t off Ic 10 t on
100 TIME (nS)
100 TIME (nS)
t on I B1 =
tf
10 I B1 = I B2 =
Ic 10
tr
10
VBE(OFF) = 0.5V
Ic t off I = I = B1 B2 10
td
1
1
10 I C - COLLECTOR CURRENT (mA)
100
1
1 I
10 - COLLECTOR CURRENT (mA)
100
Power Dissipation vs Ambient Temperature
350 P D - POWER DISSIPATION (mW) 300 250 200 150 100 50 0 0 25 50 75 100 TEMPERATURE ( o C) 125 150
SOT-23
BSR18A
PNP General Purpose Amplifier
(continued)
Typical Characteristics
(continued)
_4
)
Voltage Feedback Ratio
100 h ie - INPUT IMPEDANCE (k Ω) 10
Input Impedance
VCE = 10 V f = 1.0 kHz
h re - VOLTAGE FEEDBACK RATIO (x10
10
1
1 0.1
1 I C - COLLECTOR CURRENT (mA)
10
0.1 0.1
1 I C - COLLECTOR CURRENT (mA)
10
Output Admittance
h oe - OUTPUT ADMITTANCE ( µ mhos) 1000 V CE = 10 V f = 1.0 kHz
h fe - CURRENT GAIN 1000 500
Current Gain
V CE = 10 V f = 1.0 kHz
200 100 50
100
3
20
10 0.1
1 I C - COLLECTOR CURRENT (mA)
10
10 0.1
1 I C - COLLECTOR CURRENT (mA)
10
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST
DISCLAIMER
FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™
PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8
SyncFET™ TinyLogic™ UHC™ VCX™
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. G
很抱歉,暂时无法提供与“BSR18”相匹配的价格&库存,您可以联系我们找货
免费人工找货