BZX84C11

BZX84C 4V7 - BZX84C 33 Series BZX84C 3V3 - BZX84C 33 Series Zeners Tolerance: C = 5% Absolute Maximum Ratings* Parameter Storage Temperature Range Maximum Junction Operating Temperature Total Device Dissipation Derate above 25°C Repetitive Peak Forward Current (IFRM) Repetitive Peak Working Current (IZRM) TA = 25°C unless otherwise noted Value -55 to +150 + 150 350 1.8 250 250 Units °C °C mW mW/°C mA mA 3 2 1 SOT-23 CONNECTION DIAGRAM *These ratings are limiting values above which the serviceability of the diode may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3 1 2 NC Electrical Characteristics IZT = 5.0 mA TA = 25°C unless otherwise noted IZT = 1.0 mA IZT = 20 mA Device BZX84C 3V3 BZX84C 3V6 BZX84C 3V9 BZX84C 4V3 BZX84C 4V7 BZX84C 5V1 BZX84C 5V6 BZX84C 6V2 BZX84C 6V8 BZX84C 7V5 BZX84C 8V2 BZX84C 9V1 BZX84C 10 BZX84C 11 BZX84C 12 BZX84C 13 BZX84C 15 BZX84C 16 BZX84C 18 BZX84C 20 BZX84C 22 BZX84C 24 Mark Z14 Z15 Z16 Z17 Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 Z9 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 MIN 3.1 3.4 3.7 4.0 4.4 4.8 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.4 13.8 15.3 16.8 18.8 20.8 22.8 VZ (V) MAX 3.5 3.8 4.1 4.6 5.0 5.4 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.6 17.1 19.1 21.2 23.3 25.6 ZZ (Ω) 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 40 45 55 55 70 MIN 2.3 2.7 2.9 3.3 3.7 4.2 4.8 5.6 6.3 6.9 7.6 8.4 9.3 10.2 11.2 12.3 13.7 15.2 16.7 18.7 20.7 22.7 VZ (V) MAX 2.9 3.3 3.5 4.0 4.7 5.3 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.0 15.5 17 19 21.1 23.2 25.5 ZZ (Ω) 600 600 600 600 500 480 400 150 80 80 80 100 150 150 150 170 200 200 225 225 250 250 MIN 3.6 3.9 4.1 4.4 4.5 5.0 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.5 13.9 15.4 16.9 18.9 20.9 22.9 VZ (V) MAX 4.2 4.5 4.7 5.1 5.4 5.9 6.3 6.8 7.4 8.0 8.8 9.7 10.7 11.8 12.9 14.2 15.7 17.2 19.2 21.4 23.4 25.7 ZZ (Ω) 40 40 30 30 15 15 10 6 6 6 6 8 10 10 10 15 20 20 20 20 25 25 NOTE: National preferred devices in BOLD ©1997 Fairchild Semiconductor Corporation BZX84 Series Rev. A BZX84C 4V7 - BZX84C 33 Series BZX84C Series Zeners (continued) Electrical Characteristics Device BZX84C 27 BZX84C 30 BZX84C 33 (continued) TA = 25°C unless otherwise noted IZT = 2.0 mA IZT = 100 µ A* (Ω ) IZT = 10 mA Mark Y10 Y11 Y12 MIN 25.1 28 31 VZ (V) MAX 28.9 32 35 ZZ 80 80 80 VZ (V) MIN 25 27.8 30.8 MAX 28.9 32 35 ZZ (Ω ) 300 300 325 MIN 25.2 28.1 31.1 VZ (V) MAX 29.3 32.4 35.4 ZZ (Ω ) 45 50 55 VF Foward Voltage = 0.9 V Maximum @ IF = 10 mA for all BZX 84 series *Capacitance @ VR = 0.0 volts; Frequency = 1.0 megahertz. Device BZX84C 3V3 BZX84C 3V6 BZX84C 3V9 BZX84C 4V3 BZX84C 4V7 BZX84C 5V1 BZX84C 5V6 BZX84C 6V2 BZX84C 6V8 BZX84C 7V5 BZX84C 8V2 BZX84C 9V1 BZX84C 10 BZX84C 11 BZX84C 12 BZX84C 13 BZX84C 15 BZX84C 16 BZX84C 18 BZX84C 20 BZX84C 22 BZX84C 24 VR (V) 1.0 1.0 1.0 1.0 2.0 2.0 2.0 4.0 4.0 5.0 5.0 6.0 7.0 8.0 8.0 8.0 10.5 11.2 12.6 14 15.4 16.8 (µA) 5.0 5.0 5.0 5.0 3 2 1 3 2 1 0.7 0.5 0.2 0.1 0.1 0.1 0.05 0.05 0.05 0.05 0.05 0.05 (µA) 0.05 0.05 0.05 IR CAP* (pF) 450 450 450 450 260 225 200 185 155 140 135 130 130 130 130 120 110 105 100 85 85 80 DVZ / Dt @ 5.0 mA (mV/k) MIN - 3.5 - 3.5 - 3.5 - 3.5 - 3.5 - 2.7 - 2.0 + 0.4 + 1.2 + 2.5 + 3.2 + 3.8 + 4.5 + 5.4 + 6.0 + 7.0 + 9.2 + 10.4 + 12.4 + 14.4 + 16.4 + 18.4 (mV/k) MIN 21.4 24.4 27.4 MAX 25.3 29.4 33.4 MAX 0.0 0.0 0.0 0.0 + 0.2 + 1.2 + 2.5 + 3.7 + 4.5 + 5.3 + 6.2 + 7.0 + 8.0 + 9.0 + 10 + 11 + 13 + 14 + 16 + 18 + 20 + 22 Device BZX84C 27 BZX84C 30 BZX84C 33 VR (V) 18.9 21 23.1 IR CAP* (pF) 70 70 70 DVZ / Dt @ 2.0 mA SOT-23 Tape and Reel Data and Package Dimensions SOT-23 Packaging Configuration: Figure 1. 0 Customized La bel Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a m ultilayer film (Heat Activated Adhesive in na ture) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled pa in standard option are shipped with rts 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color an is made of polystyrene plastic (antid static coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and s ome other options are described in the P ackaging Information table. These full reels are individually labeled and placed inside as tanda intermediate made of recyclable corrugated rd brown pap with a Fairchil d logo printing. One pizza box er contains eight reels maximum. And thes intermediate e boxes are placed inside a labeled shipping box which comes in different sizes depending on t e nu h mber of parts shippe d. Antistatic Cover Tape Human Readable Label Embossed Carrier Tape 3P SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code ) TNR 3,000 7" Dia 187x107x183 24,000 0.0082 0.1175 D87Z TNR 10,000 13" 343x343x64 30,000 0.0082 0.4006 3P 3P 3P SOT-23 Unit Orientation 343mm x 342mm x 64mm Intermediate box for L87Z Option Human Readable Label Human Readable Label sample H uman readable Label SOT-23 Tape Leader and Trailer Configuration: Figure 2. 0 187mm x 107mm x 183mm Intermediate Box for Stand Option ard Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 75 empty poc kets Leader Tape 500mm minimum or 125 empty pockets September 1999, Rev. C SOT-23 Tape and Reel Data and Package Dimensions, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0 T E1 P2 D0 D1 F E2 B0 Wc W Tc K0 P1 A0 User Direction of Feed Dimensions are in millimeter Pkg type SOT-23 (8mm) A0 3.15 +/-0.10 B0 2.77 +/-0.10 W 8.0 +/-0.3 D0 1.55 +/-0.05 D1 1.125 +/-0.125 E1 1.75 +/-0.10 E2 6.25 min F 3.50 +/-0.05 P1 4.0 +/-0.1 P0 4.0 +/-0.1 K0 1.30 +/-0.10 T 0.228 +/-0.013 Wc 5.2 +/-0.3 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximum component rotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SOT-23 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 8mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 2.165 55 4.00 100 Dim W1 0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W2 0.567 14.4 0.567 14.4 Dim W3 (LSL-USL) 0.311 – 0.429 7.9 – 10.9 0.311 – 0.429 7.9 – 10.9 8mm 13" Dia September 1999, Rev. C SOT-23 Tape and Reel Data and Package Dimensions, continued SOT-23 (FS PKG Code 49) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 September 1998, Rev. A1 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST FASTr™ GTO™ DISCLAIMER HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench  QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. E