CD4007CN

CD4007C Dual Complementary Pair Plus Inverter October 1987 Revised January 1999 CD4007C Dual Complementary Pair Plus Inverter General Description The CD4007C consists of three complementary pairs of Nand P-channel enhancement mode MOS transistors suitable for series/shunt applications. All inputs are protected from static discharge by diode clamps to VDD and VSS. For proper operation the voltages at all pins must be constrained to be between VSS − 0.3V and VDD + 0.3V at all times. Features s Wide supply voltage range: s High noise immunity: 3.0V to 15V 0.45 VCC (typ.) Ordering Code: Order Number CD4007CM CD4007CN Package Number M14A N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS–001, 0.300” Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Pin Assignments for DIP and SOIC Note: All P-channel substrates are connected to VDD and all N-channel substrates are connected to VSS. Top View © 1999 Fairchild Semiconductor Corporation DS005943.prf www.fairchildsemi.com CD4007C Absolute Maximum Ratings(Note 1) Voltage at Any Pin Operating Temperature Range Storage Temperature Range Power Dissipation (PD) Dual-In-Line Small Outline 700 mW 500 mW VSS −0.3V to VDD +0.3V −40°C to +85°C −65°C to +150°C Operating VDD Range Lead Temperature (Soldering, 10 seconds) 260°C VSS +3.0V to VSS +15V Note 1: This device should not be connected to circuits with the power on because high transient voltages may cause permanent damage. DC Electrical Characteristics Limits Symbol IL PD VOL VOH VNL VNH IDN IDP II Parameter Quiescent Device Current Quiescent Device Dissipation Package Output Voltage LOW Level Output Voltage HIGH Level Noise Immunity (All inputs) Noise Immunity (All Inputs) Output Drive Current N-Channel Output Drive Current P-Channel Input Current Conditions Min VDD = 5.0V VDD = 10V VDD = 5.0V VDD = 10V VDD = 5.0V VDD = 10V VDD = 5.0V VDD = 10V VDD = 5.0V, VO = 3.6V VDD = 10V, VO = 7.2V VDD = 5.0V, VO = 0.95V VDD = 10V, VO = 2.9V VDD = 5.0V, VO = 0.4V, VI = V DD VDD = 10V, VO = 0.5V, VI = VDD VDD = 5.0V, VO = 2.5V, VI = V SS VDD = 10V, VO = 9.5V, VI = VSS 3.6 7.1 0.35 1.2 −1.3 −0.65 4.95 9.95 1.5 3.0 3.5 7.0 0.3 1.0 −1.1 −0.55 −40°C Typ Max 0.5 1.0 2.5 10 0.05 0.05 4.95 9.95 Min +25°C Typ 0.005 0.005 0.025 0.05 0 0 5.0 10 2.25 4.5 2.25 4.5 1.0 2.5 −4.0 −2.5 10 1.5 3.0 3.5 7.0 0.24 0.8 −0.9 −0.45 Max 0.05 1.0 2.5 10 0.01 0.01 4.95 9.95 1.4 2.9 Min +85°C Typ Max 15 30 75 300 0.05 0.05 µA µA µW µW V V V V V V V V mA mA mA mA pA Units AC Electrical Characteristics Symbol tPLH = tPHL tTLH = tTHL CI Parameter Propagation Delay Time Transition Time Input Capacitance (Note 2) Conditions VDD = 5.0V VDD = 10V VDD = 5.0V VDD = 10V Any Input Min Typ 35 20 50 30 5 Max 75 50 100 50 Units ns ns ns ns pF TA = 25°C and CL = 15 pF and rise and fall times = 20 ns. Typical temperature coefficient for all values of VDD = 0.3%/°C Note 2: AC Parameters are guaranteed by DC correlated testing. www.fairchildsemi.com 2 CD4007C AC Test Circuits Switching Time Waveforms 3 www.fairchildsemi.com CD4007C Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Package Number M14A www.fairchildsemi.com 4 CD4007C Dual Complementary Pair Plus Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N14A LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.