CD4023BCM

CD4023BC Buffered Triple 3-Input NAND Gate October 1987 Revised August 2000 CD4023BC Buffered Triple 3-Input NAND Gate General Description These triple gates are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and Pchannel enhancement mode transistors. They have equal source and sink current capabilities and conform to standard B series output drive. The devices also have buffered outputs which improve transfer characteristics by providing very high gain. All inputs are protected against static discharge with diodes to VDD and VSS. Features s Wide supply voltage range: s Low power TTL compatibility: fan out of 2 driving 74L or 1 driving 74LS s 5V–10V–15V parametric ratings s Symmetrical output characteristics s Maximum input leakage 1 µA at 15V over full temperature range 3.0V to 15V s High noise immunity: 0.45 VDD (typ) Ordering Code: Order Number CD4023BCM CD4023BCS CD4023BCN Package Number M14A M14D N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” tot he ordering code. Connection Diagram Block Diagram 1 /3 Device Shown Top View *All Inputs Protected by Standard CMOS Input Protection Circuit. © 2000 Fairchild Semiconductor Corporation DS005956 www.fairchildsemi.com CD4023BC Absolute Maximum Ratings(Note 1) (Note 2) DC Supply Voltage (VDD) Input Voltage (VIN) Storage Temp. Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) 260°C 700 mW 500 mW Recommended Operating Conditions DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) 5 VDC to 15 VDC 0 VDC to VDD VDC −0.5 VDC to +18 VDC −0.5 VDC to VDD+0.5 VDC −65°C to +150°C −40°C to +85°C Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation. Note 2: VSS = 0V unless otherwise specified. DC Electrical Characteristics (Note 3) Symbol IDD Parameter Quiescent Device Current VDD = 5V VDD = 10V VDD = 15V VOL LOW Level Output Voltage VDD = 5V VDD = 10V VDD = 15V VOH HIGH Level Output Voltage VDD = 5V VDD = 10V VDD = 15V VIL LOW Level Input Voltage VDD=5V, VO=4.5V VDD=10V, VO=9.0V VDD=15V, VO=13.5V VIH HIGH Level Input Voltage VDD=5V, VO=0.5V VDD=10V, VO=1.0V VDD=15V, VO=1.5V IOL LOW Level Output Current VDD=5V, VO = 0.4V (Note 4) IOH VDD = 10V, VO = 0.5V VDD = 15V, VO = 1.5V HIGH Level Output Current VDD = 5V, VO = 4.6V (Note 4) IIN Input Current VDD = 10V, VO = 9.5V VDD = 15V, VO = 13.5V VDD = 15V, VIN = 0V VDD = 15V, VIN = 15V Note 3: VSS = 0V unless otherwise specified. Note 4: IOH and IOL are tested one output at a time. Conditions −40°C Min Typ 1.0 2.0 4.0 0.05 0.05 0.05 4.95 9.95 14.95 1.5 |IO|