CD4024BCN

CD4024BC 7-Stage Ripple Carry Binary Counter October 1987 Revised April 2002 CD4024BC 7-Stage Ripple Carry Binary Counter General Description The CD4024BC is a 7-stage ripple-carry binary counter. Buffered outputs are externally available from stages 1 through 7. The counter is reset to its logical “0” stage by a logical “1” on the reset input. The counter is advanced one count on the negative transition of each clock pulse. Features s Wide supply voltage range: s Low power TTL compatibility: or 1 driving 74LS s High speed: 12 MHz (typ.) 3.0V to 15V Fan out of 2 driving 74L s High noise immunity: 0.45 VDD (typ.) input pulse rate VDD − VSS = 10V s Fully static operation Ordering Code: Order Number CD4024BCM CD4024BCN Package Number M14A N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Top View © 2002 Fairchild Semiconductor Corporation DS005957 www.fairchildsemi.com CD4024BC Logic Diagrams Input Logic Flip-flop logic (1 of 7 identical stages). Block Diagram www.fairchildsemi.com 2 CD4024BC Absolute Maximum Ratings(Note 1) (Note 2) DC Supply Voltage (VDD) Input Voltage (VIN ) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (Soldering, 10 seconds) (TL) 260°C 700 mW 500 mW Recommended Operating Conditions (Note 1) DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) −0.5 to +18 VDC −0.5 to VDD +0.5 VDC −65°C to +150°C +3 to +15 VDC 0 to VDD VDC −55°C to +125°C Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation. Note 2: VSS = 0V unless otherwise specified. DC Electrical Characteristics (Note 2) Symbol IDD Parameter Quiescent Device Current VDD = 5V VDD = 10V VDD = 15V VOL LOW Level Output Voltage |lO|