ES04S

ES2A - ES2D Discrete POWER & Signal Technologies ES2A - ES2D Features • • • • • • For surface mount applications. Glass passivated junction. Low profile package. Easy pick and place. Built-in strain relief. Superfast recovery times for high efficiency. 0.050 (1.270) 0.030 (0.762) 0.008 (0.203) 0.004 (0.102) 0.220 (5.588) 0.200 (5.080) 0.083 (2.108) 0.075 (1.905 ) 0.185 (4.699) 0.160 (4.064) 2 1 0.155 (3.937) 0.130 (3.302) SMB/DO-214AA COLOR BAND DENOTES CATHODE 0.096 (2.438) 0.083 (2.108) 2.0 Ampere Superfast Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RθJA RθJL Tstg TJ TA = 25°C unless otherwise noted 0.012 (0.305) 0.006 (0.152) Parameter Average Rectified Current .375 " lead length @ TA = 110°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient** Thermal Resistance, Junction to Lead** Storage Temperature Range Operating Junction Temperature Value 2.0 Units A 50 1.66 13.3 75 20 -50 to +150 -50 to +150 A W mW/°C °C/W °C/W °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Parameter TA = 25°C unless otherwise noted Device 2A 2B 100 70 100 10 350 20 0.90 18 2C 150 105 150 2D 200 140 200 50 35 50 Units V V V µA µA nS V pF Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Current @ rated VR TA = 25°C TA = 100°C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Maximum Forward Voltage @ 2.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz ©1999 Fairchild Semiconductor Corporation ES2A-ES2D, Rev. A ES2A - ES2D Typical Characteristics Forward Current Derating Curve 2.5 Forward Characteristics 50 FORWARD CURRENT (A) 10 FORWARD CURRENT (A) 2 1.5 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 1 1 0.5 0.1 TA = 2 5 º C Pulse Width = 300µs 2% Duty Cycle 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE ( º C) 175 0.01 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1.8 Non-Repetitive Surge Current PEAK FORWARD SURGE CURRENT (A) 60 50 40 30 20 10 0 REVERSE CURRENT ( µ A) 1000 Reverse Characteristics T A = 100 ºC 100 10 T A = 7 5º C 1 T A = 2 5º C 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Junction Capacitance 60 50 CAPACITANCE (pF) 40 30 20 10 0 0.1 0.5 1 5 10 20 50 100 REVERSE VOLTAGE (V) 500 50 Ω NONINDUCTIVE 50 Ω NONINDUCTIVE +0.5A (-) trr DUT 50V (approx) 50 Ω NONINDUCTIVE Pulse Generator (Note 2) (+) OSCILLOSCOPE (Note 1) 0 -0.25A NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram ES2A-ES2D, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.