ES1D

ES1A - ES1D ES1A - ES1D Features • • • • • • For surface mount applications. Glass passivated junction. Low profile package. Easy pick and place. Built-in strain relief. Superfast recovery times for high efficiency. SMA/DO-214AC COLOR BAND DENOTES CATHODE Fast Rectifiers Absolute Maximum Ratings* Symbol VRRM IF(AV) IFSM Tstg TJ TA = 25°C unless otherwise noted Parameter Maximum Repetitive Reverse Voltage Average Rectified Forward Current, @ TA=120°C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range Operating Junction Temperature Value 1A 50 1B 100 1C 150 1.0 30 -50 to +150 -50 to +150 1D 200 Units V A A °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol PD RθJA RθJL Power Dissipation Thermal Resistance, Junction to Ambient* Thermal Resistance, Junction to Lead* Parameter Value 1.47 85 35 Units W °C/W °C/W *Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Symbol VF trr IR CT TA = 25°C unless otherwise noted Parameter 1A Forward Voltage @ 1.0 A Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Reverse Current @ rated VR Total Capacitance VR = 4.0 V, f = 1.0 MHz Device 1B 0.92 15 TA = 25°C TA = 100°C 5.0 100 7.0 1C 1D Units V ns µA µA pF 2001 Fairchild Semiconductor Corporation ES1A-ES1D, Rev. C ES1A - ES1D Typical Characteristics Average Rectified Forward Current, IF [A] 1.5 1.25 1 0.75 0.5 0.25 0 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS 10 Forward Current, IF [A] 1 0.1 0.01 TA = 2 5º C Pulse Width = 300µs 2% Duty Cycle 0 25 50 75 100 125 Ambient Temperature [ºC] 150 175 0.001 0.4 0.6 0.8 1 1.2 Forward Voltage, VF [V] 1.4 Figure 1. Forward Current Derating Curve 30 25 Figure 2. Forward Voltage Characteristics 1000 Peak Forward Surge Current, IFSM [A] Reverse Current, IR [mA] 100 20 15 10 5 0 T A = 125 º C 10 TA = 7 5º C 1 T A = 2 5º C 1 2 5 10 20 Number of Cycles at 60Hz 50 100 0.1 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 3. Non-Repetitive Surge Current 14 Total Capacitance, C T [ pF] 12 10 8 6 4 2 0 0.1 Figure 4. Reverse Current vs Reverse Voltage 1 10 Reverse Voltage, V R [ V] 100 Figure 5. Total Capacitance 50Ω NONINDUCTIVE 50Ω NONINDUCTIVE +0.5A (-) trr DUT 50V (approx) 50Ω NONINDUCTIVE Pulse Generator (Note 2) (+) OSCILLOSCOPE (Note 1) 0 -0.25A NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram 2001 Fairchild Semiconductor Corporation ES1A-ES1D, Rev. C TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT ™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ DISCLAIMER FAST ® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench ® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER ® SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET ® VCX™ STAR*POWER is used under license FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4