FDP15N40

FDP15N40 / FDPF15N40 N-Channel MOSFET October 2008 FDP15N40 / FDPF15N40 N-Channel MOSFET 400V, 15A, 0.3Ω Features • RDS(on) = 0.24Ω ( Typ.)@ VGS = 10V, ID = 7.5A • Low Gate Charge ( Typ. 28nC) • Low Crss ( Typ. 17pF) • Fast Switching • 100% Avalanche Tested • Improved dv/dt Capability • RoHS Compliant UniFETTM tm Description These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pluse in the avalanche and commutation mode. These devices are well suited for high efficient switched mode power supplies and active power factor correction. D G GDS TO-220 FDP Series GD S TO-220F FDPF Series S MOSFET Maximum Ratings TC = 25oC unless otherwise noted* Symbol VDSS VGSS ID IDM EAS IAR EAR dv/dt PD TJ, TSTG TL Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Drain Current Single Pulsed Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TC = 25oC) - Derate above 25oC -Continuous (TC = 25oC) -Continuous (TC = 100oC) - Pulsed (Note 1) (Note 2) (Note 1) (Note 1) (Note 3) 170 1.45 -55 to +150 300 15 9 60 731 15 17 15 40 0.3 FDP15N40 FDPF15N40 400 ±30 15* 9* 60* Units V V A A mJ A mJ V/ns W W/oC o o Operating and Storage Temperature Range Maximum Lead Temperature for Soldering Purpose, 1/8” from Case for 5 Seconds C C *Drain current limited by maximum junction temperature Thermal Characteristics Symbol RθJC RθCS RθJA Parameter Thermal Resistance, Junction to Case Thermal Resistance, Case to Sink Typ. Thermal Resistance, Junction to Ambient FDP15N40 0.7 0.5 62.5 FDPF15N40 3.0 62.5 o Units C/W ©2008 Fairchild Semiconductor Corporation FDP15N40 / FDPF15N40 Rev. A 1 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Package Marking and Ordering Information TC = 25oC unless otherwise noted Device Marking FDP15N40 FDPF15N40 Device FDP15N40 FDPF15N40 Package TO-220 TO-220F Reel Size Tape Width Quantity 50 50 Electrical Characteristics Symbol Parameter Test Conditions Min. Typ. Max. Units Off Characteristics BVDSS ΔBVDSS ΔTJ IDSS IGSS Drain to Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate to Body Leakage Current ID = 250μA, VGS = 0V, TJ = 25oC ID = 250μA, Referenced to 25oC VDS = 400V, VGS = 0V VDS = 320V, TC = 125oC VGS = ±30V, VDS = 0V 400 0.5 1 10 ±100 V V/oC μA nA On Characteristics VGS(th) RDS(on) gFS Gate Threshold Voltage Static Drain to Source On Resistance Forward Transconductance VGS = VDS, ID = 250μA VGS = 10V, ID = 7.5A VDS = 20V, ID = 7.5A (Note 4) 3.0 - 0.24 15.3 5.0 0.3 - V Ω S Dynamic Characteristics Ciss Coss Crss Qg(tot) Qgs Qgd Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge at 10V Gate to Source Gate Charge Gate to Drain “Miller” Charge VDS = 320V, ID = 15A VGS = 10V (Note 4, 5) VDS = 25V, VGS = 0V f = 1MHz - 1310 210 17 28 8 12 1750 280 25 36 - pF pF pF nC nC nC Switching Characteristics td(on) tr td(off) tf Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time VDD = 200V, ID = 15A R G = 25 Ω (Note 4, 5) - 26 55 72 40 62 120 154 90 ns ns ns ns Drain-Source Diode Characteristics IS ISM VSD trr Qrr Maximum Continuous Drain to Source Diode Forward Current Maximum Pulsed Drain to Source Diode Forward Current Drain to Source Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge VGS = 0V, ISD = 15A VGS = 0V, ISD = 15A dIF/dt = 100A/μs (Note 4) - 333 3.24 15 60 1.4 - A A V ns μC Notes: 1: Repetitive Rating: Pulse width limited by maximum junction temperature 2: L = 6.5mH, IAS = 15A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C 3: ISD ≤ 15A, di/dt ≤ 200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C 4: Pulse Test: Pulse width ≤ 300μs, Duty Cycle ≤ 2% 5: Essentially Independent of Operating Temperature Typical Characteristics FDP15N40 / FDPF15N40 Rev. A 2 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Typical Performance Characteristics Figure 1. On-Region Characteristics 40 VGS = 15.0V 10.0V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V Figure 2. Transfer Characteristics 60 ID,Drain Current[A] ID,Drain Current[A] 10 150 C o 10 -55 C o o 1 *Notes: 1. 250μs Pulse Test 2. TC = 25 C o 25 C *Notes: 1. VDS = 20V 2. 250μs Pulse Test 0.2 0.1 1 1 VDS,Drain-Source Voltage[V] 10 4 5 6 7 VGS,Gate-Source Voltage[V] 8 Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage 0.50 0.45 0.40 0.35 VGS = 10V Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 80 RDS(ON) [Ω], Drain-Source On-Resistance IS, Reverse Drain Current [A] 10 150 C o o 25 C 0.30 VGS = 20V 1 *Notes: 1. VGS = 0V 2. 250μs Pulse Test 0.25 *Note: TJ = 25 C o 0.20 0 10 20 30 ID, Drain Current [A] 40 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.3 VSD, Body Diode Forward Voltage [V] Figure 5. Capacitance Characteristics 3000 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Figure 6. Gate Charge Characteristics 10 VGS, Gate-Source Voltage [V] VDS = 100V VDS = 200V VDS = 320V 8 Capacitances [pF] 2000 *Note: 1. VGS = 0V 2. f = 1MHz Ciss 6 4 1000 Coss 2 *Note: ID = 15A Crss 0 0.1 0 1 10 VDS, Drain-Source Voltage [V] 30 0 5 10 15 20 25 Qg, Total Gate Charge [nC] 30 FDP15N40 / FDPF15N40 Rev. A 3 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Typical Performance Characteristics (Continued) Figure 7. Breakdown Voltage Variation vs. Temperature 1.2 BVDSS, [Normalized] Drain-Source Breakdown Voltage RDS(on), [Normalized] Drain-Source On-Resistance Figure 8. On-Resistance Variation vs. Temperature 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -75 *Notes: 1. VGS = 10V 2. ID = 7.5A 1.1 1.0 0.9 *Notes: 1. VGS = 0V 2. ID = 250μA 0.8 -75 -25 25 75 125 o TJ, Junction Temperature [ C] 175 -25 25 75 125 o TJ, Junction Temperature [ C] 175 Figure 9. Maximum Safe Operating Area - FDP15N40 100 100μs 30μs Figure 10. Maximum Safe Operating Area 16 ID, Drain Current [A] ID, Drain Current [A] o 10 1ms 10ms DC 12 1 Operation in This Area is Limited by R DS(on) *Notes: 1. TC = 25 C 2. TJ = 150 C 3. Single Pulse o 8 0.1 4 0.01 1 10 100 VDS, Drain-Source Voltage [V] 800 0 25 50 75 100 125 o TC, Case Temperature [ C] 150 Figure 11. Transient Thermal Response Curve - FDP15N40 1 Thermal Response [ZθJC] 0.5 0.2 0.1 0.1 0.05 PDM t1 t2 0.02 0.01 0.01 Single pulse *Notes: 1. ZθJC(t) = 0.7 C/W Max. 2. Duty Factor, D= t1/t2 3. TJM - TC = PDM * ZθJC(t) o 0.002 -5 10 10 -4 10 10 10 10 Rectangular Pulse Duration [sec] -3 -2 -1 0 10 1 10 2 FDP15N40 / FDPF15N40 Rev. A 4 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveforms Unclamped Inductive Switching Test Circuit & Waveforms FDP15N40 / FDPF15N40 Rev. A 5 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + V DS _ I SD L D r iv e r R G S am e T ype as DUT V DD V GS • d v / d t c o n t r o lle d b y R G • I S D c o n t r o lle d b y p u ls e p e r io d V GS ( D r iv e r ) G a t e P u ls e W id th D = -------------------------G a te P u ls e P e r io d 10V I F M , B o d y D io d e F o r w a r d C u r r e n t I SD (DUT ) IR M d i/ d t B o d y D io d e R e v e r s e C u r r e n t V DS (DUT ) B o d y D io d e R e c o v e r y d v / d t V SD V DD B o d y D io d e F o r w a r d V o lt a g e D r o p FDP15N40 / FDPF15N40 Rev. A 6 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Mechanical Dimensions TO-220 9.90 ±0.20 1.30 ±0.10 2.80 ±0.10 (8.70) ø3.60 ±0.10 (1.70) 4.50 ±0.20 1.30 –0.05 +0.10 9.20 ±0.20 (1.46) 13.08 ±0.20 (1.00) (3.00) 15.90 ±0.20 1.27 ±0.10 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP [2.54 ±0.20] 10.08 ±0.30 18.95MAX. (3.70) ) (45° 0.50 –0.05 +0.10 2.40 ±0.20 10.00 ±0.20 FDP15N40 / FDPF15N40 Rev. A 7 www.fairchildsemi.com FDP15N40 / FDPF15N40 N-Channel MOSFET Mechanical Dimensions TO-220F 3.30 ±0.10 10.16 ±0.20 (7.00) ø3.18 ±0.10 2.54 ±0.20 (0.70) 6.68 ±0.20 15.80 ±0.20 (1.00x45°) MAX1.47 9.75 ±0.30 0.80 ±0.10 (3 ) 0° 0.35 ±0.10 2.54TYP [2.54 ±0.20] #1 2.54TYP [2.54 ±0.20] 4.70 ±0.20 0.50 –0.05 +0.10 2.76 ±0.20 9.40 ±0.20 Dimensions in Millimeters 15.87 ±0.20 www.fairchildsemi.com FDP15N40 / FDPF15N40 Rev. A 8 FDP15N40 / FDPF15N40 N-Channel MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EfficentMax™ EZSWITCH™ * ™ ® tm Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * FPS™ F-PFS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® tm Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ ™ tm PDP SPM™ Power-SPM™ PowerTrench® PowerXS™ Saving our world, 1mW /W /kW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SupreMOS™ SyncFET™ ® The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ μSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ XS™ * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Farichild’s Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Farichild strongly encourages customers to purchase Farichild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Farichild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Farichild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative / In Design Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I37 Preliminary First Production No Identification Needed Obsolete Full Production Not In Production FDP15N40 / FDPF15N40 Rev. A 9 www.fairchildsemi.com