FEP16ATA

FEP16AT - FEP16JT Discrete POWER & Signal Technologies FEP16AT - FEP16JT Features • • • • Low forward voltage drop. High surge current capacity. High current capability. High reliability. 0.113(2.87) 0.103(2.62) 0.27(6.86) 0.23(5.84) 0.412(10.5) MAX 0.154(3.91) 0.148(3.74) 0.185(4.70) 0.175(4.44) 0.055(1.40) 0.045(1.14) 0.594(15.1) 0.587(14.9) TO-220AB 0.16(4.06) 1 0.14(3.56) 2 3 0.11(2.79) 0.10(2.54) Dimensions are in: inches (mm) PIN 1 + PIN 3 Positive CT CASE PIN 2 PIN 1 PIN 3 Negative CT Suffix “A” CASE PIN 2 PIN 3 Doubler Suffix “D” PIN 1 0.56(14.22) AC CASE PIN 2 0.037(0.94) 0.027(0.68) 0.53(13.46) 0.025(0.64) 0.105(2.67) 0.095(2.41) 0.014(0.35) 16 Ampere Glass Passivated Super Fast Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RθJA RθJL Tstg TJ TA = 25°C unless otherwise noted Parameter Average Rectified Current .375 " lead length @ TA = 100°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Storage Temperature Range Operating Junction Temperature Value 16 Units A 200 8.33 66 15 2.2 -65 to +150 -65 to +150 A W mW/°C °C/W °C/W °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics Parameter TA = 25°C unless otherwise noted Device 16AT 16BT 100 70 100 16CT 150 105 150 16DT 200 140 200 10 500 35 0.95 85 1.3 50 1.5 60 16FT 300 210 300 16GT 400 280 400 16HT 500 350 500 16JT 600 420 600 50 35 50 Units V V V µA µA nS V pF Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Blocking Voltage (Rated VR) Maximum Reverse Current @ rated VR T A = 25°C T A = 100°C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Maximum Forward Voltage @ 8.0A Typical Junction Capacitance VR = 4.0. f = 1.0 MHz ©1999 Fairchild Semiconductor Corporation FEP16AT - FEP16JT, Rev. A FEP16AT - FEP16JT Typical Characteristics Forward Current Derating Curve PEAK FORWARD SURGE CURRENT (A) 20 FORWARD CURRENT (A) Non-Repetitive Surge Current 200 16 160 12 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 120 8 80 4 40 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (º C) 175 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Forward Characteristics 100 FORWARD CURRENT (A) FEP16AT-FEP16DT Reverse Characteristics 1000 REVERSE CURRENT ( µ A) 10 FEP16FT-FEP16JT 100 T A = 100 ºC 1 10 0.1 TA = 2 5 º C Pulse Width = 300µs 2% Duty Cycle 1 T A = 25º C 0.01 0.4 0.1 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1.8 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Junction Capacitance 100 90 CAPACITANCE (pF) 80 70 60 50 FEP16FT-FEP16JT 40 FEP16AT-FEP16DT 1 2 5 10 20 REVERSE VOLTAGE (V) 50 100 50 Ω NONINDUCTIVE 50 Ω NONINDUCTIVE +0.5A (-) trr DUT 50V (approx) 50 Ω NONINDUCTIVE Pulse Generator (Note 2) (+) OSCILLOSCOPE (Note 1) 0 -0.25A -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram FEP16AT - FEP16JT, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.