FFPF06F150S

FFPF06F150S FFPF06F150S Features • High voltage and high reliability • High speed switching • Low forward voltage Applications • Suitable for damper diode in horizontal deflection circuits 1 2 TO-220F 1. Cathode 2. Anode DAMPER DIODE Absolute Maximum Ratings Symbol VRRM IF(AV) IFSM TJ, TSTG TC=25°C unless otherwise noted Value 1500 @ TC = 125°C 6 60 - 65 to +150 Units V A A °C Parameter Peak Repetitive Reverse Voltage Average Rectified Forward Current Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave Operating Junction and Storage Temperature Thermal Characteristics Symbol RθJC Parameter Maximum Thermal Resistance, Junction to Case TC=25 °C unless otherwise noted Min. TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C Typ. Max. 1.6 1.4 µA 7 60 170 350 17 ns ns V Units V Value 4.0 Units °C/W Electrical Characteristics Symbol V FM * Parameter Maximum Instantaneous Forward Voltage I F = 6A I F = 6A Maximum Instantaneous Reverse Current @ rated VR Maximum Reverse Recovery Time (IF =1A, di/dt = 50A/µ s) Maximum Forward Recovery Time (IF =6.5A, di/dt = 50A/µs) Voltage IRM * trr tfr Maximum Forward Recovery VFRM * Pulse Test: Pulse Width=300µs, Duty Cycle=2% ©2000 Fairchild Semiconductor International Rev. F, September 2000 FFPF06F150S Typical Characteristics 50 100 [A] 10 [ µA] 10 TJ = 125 C 1 TJ = 125 C o Reverse Current , I Forward Current , I R F o 1 0.1 TJ = 100 C o o TJ = 25 C o 0.01 TJ = 25 C 0.1 0.0 0.001 0.4 0.8 1.2 1.6 2.0 0 300 600 900 1200 1500 Forward Voltage , VF [V] Reverse Voltage , VR [V] Figure 1. Typical Forward Voltage Drop vs. Forward Current 120 400 Figure 2. Typical Reverse Current vs. Reverse Voltage 100 [ns] Typical Capacitance at 0V = 100 pF di/dt = 50A/µs 300 Capacitance , Cj [pF] 80 Reverse Recovery Time , t rr 60 200 40 di/dt = 100A/µs 100 20 0 0.1 0 1 10 100 1 2 3 4 5 6 7 8 9 10 Reverse Voltage , VR [V] Forward Current , IF [A] Figure 3. Typical Junction Capacitance Figure 4. Typical Reverse Recovery Time vs. Forward Current 10 9 8 7 6 [nC] Stored Recovery Charge , Q 1500 Average Forward Current , I di/dt = 100A/µs rr F(AV) [A] 2000 C D 1000 di/dt = 50A/µs 5 4 3 2 1 0 80 100 120 o 500 0 1 2 3 4 5 6 7 8 9 10 140 160 Forward Current , IF [A] Case Temperature , TC [ C] Figure 5. Typical Stored Charge vs. Forward Current ©2000 Fairchild Semiconductor International Figure 6. Forward Current Derating Curve Rev. F, September 2000 FFPF06F150S Package Dimensions TO-220F 2L 10.16 ±0.20 ø3.18 ±0.10 2.54 ±0.20 (0.70) 3.30 ±0.10 6.68 ±0.20 15.80 ±0.20 (1.00x45°) (6.50) (1.80) 9.75 ±0.30 12.00 ±0.20 MAX1.47 0.80 ±0.10 2.76 ±0.20 0.35 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP [2.54 ±0.20] +0.10 0.50 –0.05 9.40 ±0.20 4.70 ±0.20 15.87 ±0.20 Dimensions in Millimeters Rev. F, September 2000 ©2000 Fairchild Semiconductor International TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST® DISCLAIMER FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ POP™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. F1