FFPF10H60S Hyperfast 2 Rectifier
April 2007
FFPF10H60S Hyperfast 2 Rectifier
Features
• High Speed Switching ( trr=25ns(Typ.) @ IF=10A ) • High Reverse Voltage and High Reliability • Avalanche Energy Rated • Low Forward Voltage( VF=2.1V(Typ.) @ IF=10A )
tm
10A, 600V Hyperfast 2 Rectifier
The FFPF10H60S is hyperfast2 rectifier (trr=25ns(Typ.) @ IF=10A). it has half the recovery time of ultrafast rectifier and is silicon nitride passivated ion-implanted epitaxial planar construction. This device is intended for use as freewheeling/clamping rectifiers in a variety of switching power supplies and other power swithching applications. Its low stored charge and hyperfast soft recovery minimize ringing and electrical noise in many power switching circuits reducing power loss in the switching transistors.
Applications
• General Purpose • Switching Mode Power Supply • Free-wheeling diode for motor application • Power switching circuits
Pin Assignments
TO-220F-2L 1. Cathode 2. Anode
1 1. Cathode
2 2. Anode
Absolute Maximum Ratings
Symbol
VRRM VRWM VR IF(AV) IFSM TJ, TSTG
TC = 25°C unless otherwise noted
Parameter
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave Operating Junction and Storage Temperature
= 25°C unless otherwise noted
Value
600 600 600 @ TC = 85 °C 10 100 - 65 to +150
Units
V V V A A °C
Thermal Characteristics T
Symbol RθJC
C
Parameter Maximum Thermal Resistance, Junction to Case
Max 3.4
Units °C/W
Package Marking and Ordering Information
Device Marking
F10H60S
Device
FFPF10H60STU
Package
TO-220F
Reel Size
-
Tape Width
-
Quantity
50
©2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
FFPF10H60S Rev. A
FFPF10H60S Hyperfast 2 Rectifier
Electrical Characteristics T
Parameter
VFM
1
C
= 25°C unless otherwise noted
Conditions
IF = 10A IF = 10A VR = 600V VR = 600V IF =1A, di/dt = 100A/µs, VCC = 30V IF =10A, di/dt = 50A/µs, VCC = 390V IF =10A, di/dt = 200A/µs, VCC = 390V IF =10A, di/dt = 50A/µs, VCC = 390V TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C TC = 25 °C TC = 25 °C TC = 25 °C TC = 25 °C TC = 25 °C TC = 25 °C
Min.
20
Typ.
2.1 25 21 15 10 9.0 -
Max
2.5 2.2 1 2 35 40 -
Units
V V mA mA ns ns ns ns ns nC mJ
IRM1 trr
ta tb Qrr WAVL
Avalanche Energy (L = 40mH)
Notes: 1. Pulse : Test Pulse width = 300µs, Duty Cycle = 2%
Test Circuit and Waveforms
2 FFPF10H60S Rev. A
www.fairchildsemi.com
FFPF10H60S Hyperfast 2 Rectifier
Typical Performance Characteristics T
Figure 1. Typical Forward Voltage Drop
100
C
= 25°C unless otherwise noted
Figure 2. Typical Reverse Current
1E-4
FPRWARD CURRENT, IF [A]
REVERSE CURRENT, IR [A]
1E-5
TC = 125 C
o
o
10
TC=125 C
o
TC=25 C
o
1E-6
TC = 75 C
1E-7
1
TC=75 C
o
1E-8
TC = 25 C
o
0.1 0.0
1E-9 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 0 100 200 300 400 500 600
FORWARD VOLTAGE, VF [V]
REVERSE VOLTAGE, VR [V]
Figure 3. Typical Junction Capacitance
70
Figure 4. Typical Reverse Recovery Time
100
REVERSE RECOVERY TIME, trr [ns]
f = 1MHz JUNCTION CAPACITANCE, CJ [pF]
60
90 80 70 60 50 40 30 20 10 0 50
IF = 10A
50
TC = 125 C
o
40
30
TC = 75 C
o
20
10
TC = 25 C
o
0 1 10 100 1000
100
150
200
250
300 350 400 450500
REVERSE VOLTAGE, VR [V]
di/dt [A/µs]
Figure 5. Typical Reverse Recovery Current
REVERSE RECOVERY CURRENT, Irr [A]
10 9 8 7 6 5 4 3 2 1 0 50
Figure 6. Forward Current Deration Curve
AVERAGE FORWARD CURRENT, IF(AV) [A]
16 14 12 10 8
IF = 10A
TC = 125 C
o
o
DC
6 4 2 0 50
TC = 25 C
TC = 75 C
100 150 200 250 300 350 400 450500
o
60
70
80
90
100
110
120
o
130
140
150
di/dt [A/µs]
CASE TEMPERATURE, TC [ C]
3 FFPF10H60S Rev. A
www.fairchildsemi.com
FFPF10H60S Hyperfast 2 Rectifier
Mechanical Dimensions
TO-220F 2L
10.16 ±0.20 ø3.18 ±0.10 2.54 ±0.20 (0.70)
3.30 ±0.10
6.68 ±0.20
15.80 ±0.20
(1.00x45°)
(6.50)
(1.80)
9.75 ±0.30
12.00 ±0.20
MAX1.47 0.80 ±0.10
2.76 ±0.20
0.35 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP [2.54 ±0.20]
+0.10
0.50 –0.05
9.40 ±0.20
4.70 ±0.20
Dimensions in Millimeters
4 FFPF10H60S Rev. A
15.87 ±0.20
www.fairchildsemi.com
tm
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™ E2CMOS™ EcoSPARK® EnSigna™ FACT Quiet Series™ FACT® FAST® FASTr™ FPS™ FRFET® GlobalOptoisolator™ GTO™ HiSeC™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR® PACMAN™ POP™ Power220® Power247® PowerEdge™ PowerSaver™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ The Power Franchise® ™
tm
TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyWire™ TruTranslation™ µSerDes™ UHC® UniFET™ VCX™ Wire™
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I24
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
很抱歉,暂时无法提供与“FFPF10H60S”相匹配的价格&库存,您可以联系我们找货
免费人工找货