FHP3132

FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers March 2007 FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Features at ±5V ■ 2.5mA supply current per amplifier ■ 260MHz GBWP ■ Stable for G = 5 and above ■ Output voltage range at RL = 150Ω: ±4.7V ■ Input includes negative rail ■ 400V/μs slew rate ■ ±100mA output current ■ 17nV/√Hz input voltage noise ■ >100dB PSRR, CMRR, and open-loop gain ■ FHP3132 lead-free package option (SOT23-5) ■ FHP3232 lead-free package option (SOIC-8) ■ RoHS compliant ■ Fully specified at +3V, +5V, and ±5V supplies Description The FHP3132 (single) and FHP3232 (dual) are low-cost, high-performance, voltage feedback amplifiers that consume only 2.5mA of supply current per channel, while providing ±100mA of output current. These amplifiers are designed to operate from 2.7V to 12V (±6V) supplies. The commonmode voltage range includes the negative rail and the output provides rail-to-rail performance. The FHP3132 and FHP3232 are designed on a complimentary bipolar process and provide 85MHz of bandwidth at VOUT = 2Vpp and gain of 5V/V. The combination of low power, rail-to-rail performance, low-voltage operation, and tiny package options make these amplifiers well suited for use in many general-purpose, high-speed applications. Applications ■ A/D driver ■ Active filters ■ CCD imaging systems ■ CD/DVD ROM ■ Coaxial cable drivers ■ Portable/battery-powered applications ■ Twisted-pair driver ■ Video driver Typical Application YIN 1/2 FHP3232 75Ω CIN YOUT 75Ω 1kΩ 1/2 FHP3232 75Ω COUT 75Ω 1kΩ 1kΩ 1kΩ Figure 1. YC Video Line Driver Ordering Information Part Number FHP3132IS5X FHP3232IM8X Package SOT23-5 SOIC-8 Pb-Free Yes Yes Operating Temperature Range -40°C to +85°C -40°C to +85°C Packaging Method Reel Reel Moisture sensitivity level for all parts is MSL-1. © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Pin Configurations OUT1 -IN1 +IN1 -Vs 1 2 7 8 7 6 5 +Vs OUT2 -IN2 +IN2 OUT -Vs +IN 1 2 3 5 +Vs 3 4 + 4 -IN Figure 2. FHP3232 SOIC Figure 3. FHP3132 SOT23 Pin Assignments FHP3232 Pin # SOIC 1 2 3 4 5 6 7 8 FHP3132 Pin # SOT23 1 2 3 4 5 Name OUT1 -IN1 +IN1 -Vs +IN2 -IN2 OUT2 +Vs Description Output, channel 1 Negative Input, channel 1 Positive Input, channel 1 Negative supply Positive Input, channel 2 Negative Input, channel 2 Output, channel 2 Positive supply Name OUT -Vs +IN -IN +Vs Output Description Negative supply Positive Input Negative Input Positive supply © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 2 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Parameter Supply Voltage Input Voltage Range Min. 0 -Vs -0.5V Max. 12.6 +Vs +0.5V Unit V V Reliability Information Parameter Junction Temperature Storage Temperature Range Reflow Temperature (Soldering) Package Thermal Resistance 8-Lead SOIC (1) Min. -65 Typ. Max. 150 150 260 Unit °C °C °C °C/W °C/W 155 296 5-Lead SOT23(1) Notes: 1. Package thermal resistance (θJA), JEDEC standard, multi-layer test boards, still air. ESD Protection Product Package Human Body Model (HBM) Charged Device Model (CDM) FHP3132 SOT23 4.5kV 2kV FHP3232 SOIC 5kV 2kV Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Parameter Operating Temperature Range Supply Voltage Range Min. -40 2.7 Typ. Max. +85 12.0 Unit °C V © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 3 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Electrical Characteristics at +3V TA = 25°C, VS = 3V, RL = 2kΩ to VS/2, G = 5, Rf = 1kΩ, unless otherwise noted. Symbol BWSS BWLS GBWP tR, tF tS OS SR HD2 HD3 THD en XTALK VIO dVIO Ib dIb IIO PSRR AOL IS RIN CIN CMIR CMRR Parameter Small Signal Bandwidth Large Signal Bandwidth Gain Bandwidth Product Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Crosstalk Input Offset Voltage Average Drift Input Bias Current Average Drift Input Offset Current Power Supply Rejection Ratio Open-Loop Gain Supply Current per Amplifier Input Resistance Input Capacitance Input Common Mode V Range Common Mode Rejection Ratio DC Conditions G = +5, VOUT = 0.2Vpp G = +5, VOUT = 1Vpp G = +10, VOUT = 0.2Vpp VOUT = 0.2V step VOUT = 2V step VOUT = 0.2V step VOUT = 2V step, G = -4 VOUT = 1Vpp, 5MHz VOUT = 1Vpp, 5MHz VOUT = 1Vpp, 5MHz > 100kHz FHP3232 at 1MHz Min. Typ. 95 70 265 5 65 1 400 70 84 68 17 52 1 5 -1.8 4 0.01 100 100 2.5 500 1.5 -0.3 to 2 Max. Units MHz MHz MHz ns ns % V/μs dBc dBc dB nV/√Hz dB mV μV/°C μA nA/°C μA dB dB mA kΩ pF V dB V V mA mA Frequency Domain Response Time Domain Response Distortion/Noise Response DC Performance DC, RL = 150Ω Input Characteristics DC, VCM = 0V to Vs - 1.5 RL = 2kΩ to Vs/2, G = -1 RL = 150Ω to Vs/2, G = -1 VOUT = Vs/2 95 0.05 to 2.95 0.1 to 2.9 ±100 ±120 Output Characteristics VOUT IOUT ISC Output Voltage Swing Linear Output Current Short-Circuit Output Current © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 4 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Electrical Characteristics at +5V TA = 25°C, VS = 5V, RL = 2kΩ to VS/2, G = 5, Rf = 1kΩ, unless otherwise noted. Symbol BWSS BWLS GBWP tR, tF tS OS SR HD2 HD3 THD en XTALK VIO dVIO Ib dIb IIO PSRR AOL IS RIN CIN CMIR CMRR Parameter Small Signal Bandwidth Large Signal Bandwidth Gain Bandwidth Product Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Crosstalk Input Offset Voltage Average Drift Input Bias Current Average Drift Input Offset Current Power Supply Rejection Ratio Open-Loop Gain Supply Current per Amplifer Input Resistance Input Capacitance Input Common Mode V Range Common Mode Rejection Ratio DC Conditions G = +5, VOUT = 0.2Vpp G = +5, VOUT = 2Vpp G = +10, VOUT = 0.2Vpp VOUT = 0.2V step VOUT = 2V step VOUT = 0.2V step VOUT = 4V step, G = -4 VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz > 100kHz FHP3232 at 1MHz Min. Typ. 90 75 265 5 65 1 400 58 80 56 17 52 1 5 -1.8 4 0.01 100 100 2.5 500 1.5 -0.3 to 4 Max. Units MHz MHz MHz ns ns % V/μs dBc dBc dB nV/√Hz dB mV μV/°C μA nA/°C μA dB dB mA kΩ pF V dB V V mA mA Frequency Domain Response Time Domain Response Distortion / Noise Response DC Performance DC, RL = 150Ω Input Characteristics DC, VCM = 0V to Vs - 1.5 RL = 2kΩ to Vs/2 RL = 150Ω to Vs/2 VOUT = Vs/2 95 0.05 to 4.95 0.1 to 4.9 ±100 ±120 Output Characteristics VOUT IOUT ISC Output Voltage Swing Linear Output Current Short-Circuit Output Current © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 5 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Electrical Characteristics at ±5V TA = 25°C, VS = ±5V, RL = 2kΩ to GND, G = 5, Rf = 1kΩ, unless otherwise noted. Symbol BWSS BWLS GBWP tR, tF tS OS SR HD2 HD3 THD en XTALK VIO dVIO Ib dIb IIO PSRR AOL IS RIN CIN CMIR CMRR Parameter Small Signal Bandwidth Large Signal Bandwidth Gain Bandwidth Product Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate 2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Crosstalk Input Offset Voltage(1) Average Drift Input Bias Current(1) Average Drift Input Offset Current(1) Power Supply Rejection Ratio(2) Open-Loop Gain(2) Supply Current per Amplifier(1) Input Resistance Input Capacitance Input Common Mode V Range Common Mode Rejection Ratio (2) Conditions G = +5, VOUT = 0.2Vpp G = +5, VOUT = 2Vpp G = +10, VOUT = 0.2Vpp VOUT = 0.2V step VOUT = 2V step VOUT = 0.2V step VOUT = 4V step, G = -4 VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz > 100kHz FHP3232 at 1MHz Min. Typ. 85 70 260 6 55 1 400 56 90 55 17 52 Max. Units MHz MHz MHz ns ns % V/μs dBc dBc dB nV/√Hz dB Frequency Domain Response Time Domain Response Distortion/Noise Response DC Performance -6 -4.0 -0.80 DC DC, RL = 150Ω 80 80 1 5 -1.8 4 0.01 100 100 2.5 500 1.5 -5.3 to 4.0 DC, VCM = -5V to 3.5V RL = 2kΩ RL = 150Ω(1) VOUT = 0V -4.65 75 100 ±4.95 ±4.70 ±100 ±120 4.65 3.5 0.80 6 mV μV/°C μA nA/°C μA dB dB mA kΩ pF V dB V V mA mA Input Characteristics Output Characteristics VOUT IOUT ISC Output Voltage Swing Linear Output Current Short-Circuit Output Current Notes: 1. 100% tested at 25°C. 2. Minimum and maximum values are guaranteed by design/characterization. © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 6 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Typical Performance Characteristics TA = 25°C, VS = ±5V, RL = 2kΩ to GND, G = 5, Rf = 1kΩ, unless otherwise noted. 1 1 G=5 Normalized Gain (dB) Normalized Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 Vo = 0.2Vpp G = 10 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 Vo = 0.2Vpp G = -10 G = -4 Frequency (MHz) Frequency (MHz) Figure 4. Non-Inverting Freq. Response (±5V) Figure 5. Inverting Freq. Response (±5V) 1 Normalized Gain (dB) -1 -2 -3 -4 -5 -6 -7 0.1 1 10 Vo = 0.2Vpp G = 10 G=5 Normalized Gain (dB) 0 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 0.1 G = -4 G = -10 Vo = 0.2Vpp 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) Figure 6. Non-Inverting Freq. Response (5V) Figure 7. Inverting Freq. Response (5V) 1 1 G=5 Normalized Gain (dB) Normalized Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 Vo = 0.2Vpp G = 10 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 Vo = 0.2Vpp G = -10 G = -4 Frequency (MHz) Frequency (MHz) Figure 8. Non-Inverting Freq. Response (3V) Figure 9. Inverting Freq. Response (3V) © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 7 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Typical Performance Characteristics (Continued) TA = 25°C, VS = ±5V, RL = 2kΩ to GND, G = 5, Rf = 1kΩ, unless otherwise noted. 2 1 1 Vo = 0.2Vpp CL = 50pF RS = 40Ω CL = 500pF RS = 8Ω Normalized Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 0.1 Normalized Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 Vo = 0.2Vpp RL = 50Ω RL = 150Ω RL = 1kΩ RL = 5kΩ CL = 1000pF RS = 6.5Ω CL = 100pF RS = 30Ω + 1kΩ 1kΩ Rs CL RL 1 10 100 1000 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) Figure 10. Frequency Response vs. CL (3V) Figure 11. Frequency Response vs. RL (3V) 1 Normalized Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 0.1 1 10 100 1000 VOUT = 2Vpp VOUT = 1Vpp VOUT = 4Vpp 90 80 20 0 Gain Open Loop Phase (deg) Open Loop Gain (dB) 70 60 50 40 30 20 10 0 -10 -20 10k -20 -40 -60 Phase -80 -100 -120 -140 -160 -180 -200 100k 1M 10M 100M 1G Frequency (MHz) Frequency (Hz) Figure 12. Large Signal Freq. Response (5V) Figure 13. Open-Loop Gain and Phase (5V) 2nd Harmonic Distortion (dBc) -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 0.1 3rd Harmonic Distortion (dBc) -45 Vo = 1Vpp -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 0.1 Vo = 1Vpp Reached equipment limitations of -90dBc RL = 150Ω RL = 150Ω RL = 5kΩ RL = 1kΩ RL = 2kΩ RL = 1kΩ RL = 2kΩ RL = 5kΩ 1 10 1 10 Frequency (MHz) Frequency (MHz) Figure 14. HD2 vs. RL (3V) Figure 15. HD3 vs. RL (3V) © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 8 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Typical Performance Characteristics (Continued) TA = 25°C, VS = ±5V, RL = 2kΩ to GND, G = 5, Rf = 1kΩ, unless otherwise noted. -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 Freq. = 100kHz Freq. = 5MHz Freq. = 10MHz 2nd Harmonic Distortion (dBc) 3rd Harmonic Distortion (dBc) -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 Reached equipment limitations of -90dBc Freq. = 10MHz Freq. = 5MHz Freq. = 1MHz Freq. = 1MHz Freq. = 100kHz 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 Output Amplitude (Vpp) Output Amplitude (Vpp) Figure 16. HD2 vs. VOUT (3V) Figure 17. HD3 vs. VOUT (3V) 110 100 90 70 60 50 40 30 20 10 1k 10k 100k 1M 10M 100M 80 110 100 90 80 70 60 50 40 30 20 10 1k 10k 100k 1M 10M 100M Frequency (Hz) CMRR (dB) PSRR (dB) Frequency (Hz) Figure 18. PSRR vs. Frequency (3V) Figure 19. CMRR vs. Frequency (3V) 3.25 2.75 Input Voltage Noise (nV/√HZ) 0.8 RL = 1kΩ RL = 10kΩ RL = 500Ω 100 90 80 70 60 50 40 30 20 10 0 0.0001 0.001 0.01 0.1 1 10 100 Output Voltage (V) 2.25 1.75 1.25 0.75 0.25 -0.25 -0.2 0 0.2 0.4 0.6 RL = 75Ω RL = 100Ω RL = 200Ω Input Voltage (V) Frequency (MHz) Figure 20. Output Voltage Swing vs. Load (3V) Figure 21. Input Voltage Noise (3V) © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 9 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Typical Performance Characteristics (Continued) TA = 25°C, VS = ±5V, RL = 2kΩ to GND, G = 5, Rf = 1kΩ, unless otherwise noted. -40 -45 -50 2.5 2 Crosstalk (dB) -55 -60 -65 -70 -75 -80 -85 0.1 1 10 Amplitude (V) 1.5 1 0.5 0 -0.5 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Frequency (MHz) Time (μs) Figure 22. Crosstalk vs. Frequency (3V) Figure 23. Pulse Response (3V) 3.5 3 2.5 2 1.5 Amplitude (V) 2 1.5 1 0.5 0 -0.5 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Amplitude (V) 2.5 1 0.5 0 -0.5 -1 -1.5 -2 -2.5 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Time (μs) Time (μs) Figure 24. Pulse Response (5V) Figure 25. Pulse Response (±5V) © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 10 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Application Information Driving Capacitive Loads The Frequency Response vs. CL plot in Figure 10 illustrates the response of the FHP3132/3232. A small series resistance (Rs) at the output of the amplifier, illustrated in Figure 26, improves stability and settling performance. Rs values in the Frequency Response vs. CL plot were chosen to achieve maximum bandwidth with less than 1dB of peaking. For maximum flatness, use a larger Rs. Follow the maximum power derating curves shown in Figure 27 to ensure proper operation. Maximum Power Dissipation (W) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80 SOT23-5 MSOP-8 SOIC-8 TSSOP-14 SOIC-14 + Rg Rf Rs CL RL Ambient Temperature (°C) Figure 27. Maximum Power Derating Figure 26. Typical Topology for Driving Capactive Loads Overdrive Recovery For an amplifier, an overdrive condition occurs when the output and/or input ranges are exceeded. The recovery time varies based on whether the input or output is overdriven and by how much the ranges are exceeded. The FHP3132/3232 typically recovers in less than 50ns from an overdrive condition. Figure 28 shows the FHP3132 in an overdriven condition. 3.5 3.0 2.5 Vs = 3V G = 10 RL = 2kΩ Power Dissipation The maximum internal power dissipation allowed is directly related to the maximum junction temperature. If the maximum junction temperature exceeds 150°C for an extended time, device failure may occur. The FHP3132 and FHP3232 are short-circuit protected; however, this may not guarantee that the maximum junction temperature (+150°C) is not exceeded under all conditions. RMS power dissipation can be calculated using the following equation: PD = Is * (Vs+ - Vs-) + (Vs+ - Vo(RMS)) * IOUT(RMS) where: Is = the supply current Vs+ = the positive supply pin voltage Vs- = the negative supply pin voltage Vo(RMS) = the RMS output voltage IOUT(RMS) = the RMS output current delivered to the load. EQ. 1 Output Voltage (V) 2.0 1.5 1.0 0.5 0 -0.5 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 Input Time (μs) Figure 28. Overdrive Recovery © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 11 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Layout Considerations General layout and supply bypassing play major roles in high-frequency performance. Fairchild has evaluation boards to guide high-frequency layout and aid device testing and characterization. Follow the guidelines below as a basis for high-frequency layout: ■ Include 6.8μF and 0.01μF ceramic capacitors. ■ Place the 6.8μF capacitor within 0.75 inches of the power pin. ■ Place the 0.01μF capacitor within 0.1 inches of the power pin. ■ Remove the ground plane under and around the part, especially near the input and output pins, to reduce parasitic capacitance. ■ Minimize all trace lengths to reduce series inductances. Refer to the evaluation board layouts shown below for more information. Evalutaion Board Schematics Evaluation board schematics and layouts are shown in the figures below. These evaluation boards are built for dual- supply operation. Follow these steps to use the board in a single-supply application: 1. Short -Vs to ground. 2. Use C3 and C4 if the -Vs pin of the amplifier is not directly connected to the ground plane. Evaluation Board Information The following evaluation boards are available to aid testing and layout of these devices: Evaluation Board KEB002 KEB003 Products FHP3132IS5X FHP3232IM8X Figure 29. FHP3130 KEB002/KEB003 Schematic © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 12 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Evalutaion Board Layouts Figure 30. FHP3132 KEB002 (Top-Side) Figure 31. FHP3232 KEB003 (Top-Side) Figure 32. FHP3132 KEB002 (Bottom-Side) Figure 33. FHP3232 KEB003 (Bottom-Side) © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 13 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Mechanical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 34. SOIC-8 Package © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 14 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers Mechanical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 35. SOT23-5 Package © 2007 Fairchild Semiconductor Corporation FHP3132, FHP3232 Rev. 1.0.0 15 www.fairchildsemi.com FHP3132, FHP3232 Single and Dual, High-Speed, Rail-to-Rail Amplifiers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world. ActiveArray Bottomless Build it Now CoolFET CROSSVOLT CTL™ Current Transfer Logic™ DOME 2 E CMOS ® EcoSPARK EnSigna FACT Quiet Series™ ® FACT ® FAST FASTr FPS ® FRFET GlobalOptoisolator GTO ® HiSeC i-Lo ImpliedDisconnect IntelliMAX ISOPLANAR MICROCOUPLER MicroPak MICROWIRE MSX MSXPro OCX OCXPro ® OPTOLOGIC ® OPTOPLANAR PACMAN POP ® Power220 ® Power247 PowerEdge PowerSaver ® PowerTrench Programmable Active Droop ® QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect ScalarPump SMART START ® SPM STEALTH™ SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 SyncFET™ TCM ® The Power Franchise ™ TinyLogic TINYOPTO TinyPower TinyWire TruTranslation SerDes ® UHC UniFET VCX Wire ® TinyBoost TinyBuck DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I24 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. No Identification Needed Full Production Obsolete Not In Production www.fairchildsemi.com ©2007 Fairchild Semiconductor Corporation