µSerDes™ FIN210AC — 10-Bit Serializer / Deserializer Supporting Cameras and Small Displays up to 48MHz
June 2009
FIN210AC 10-Bit Serializer / Deserializer Supporting Cameras and Small Displays up to 48MHz
Features
Data & Control Bits Frequency Capability Interface µController Usage Selectable Edge Rates Standby Current Core Voltage (VDDA/S) I/O Voltage (VDDP) ESD (I/O to GND) Package Ordering Information 10-bit 48MHz Camera or LCD Microcontroller, RGB, YUV m68 & i86 Yes H or H->L DIRI L->H or H->L
Min.
Typ.
Max.
17 25
Unit
ns ns
Deserializer Disable Time: S0 or S1 LOW to DPTri-State; DIRI=0,
DISDES
tDISDES
S1 or S0
25
ns
DP
Note: If S0(2) is transitioning, S1(1) must =0 for test to be valid.
tDISSER
Serializer Disable Time: S0 or S1 LOW to CKP HIGH
DIRI=1; S1(0) and S0(1)=H->L
25
ns
© 2009 Fairchild Semiconductor Corporation FIN210AC • Rev. 1.0.1 13
www.fairchildsemi.com
µSerDes™ FIN210AC — 10-Bit Serializer / Deserializer Supporting Cameras and Small Displays up to 48MHz
Tape and Reel Specifications
MLP Embossed Tape Dimensions
T P0 D P2 E F K0 W Wc B0
Tc A0 P1 D1 User Direction of Feed
Package
5x5 6x6
A0 ±0.1
5.35 5.35
B0 ±0.1
5.35 5.35
D ±0.5
1.55 1.55
D1 Min.
1.50 1.50
E ±0.1
1.75 1.75
F ±0.1
5.50 5.50
K0 ±0.1
1.40 1.40
P1 Typ.
8.00 8.00
P0 Typ.
4.00 4.00
P2 ±0.5
2.00 2.00
T Typ.
0.30 0.30
TC ±0/05
0.07 0.07
W ±0.3
12.00 12.00
WC Typ.
9.30 9.30
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/JEDEC RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
MLP Shipping Reel Dimensions
10° maximum Typical component cavity center line Typical component center line A0 Sketch B (Top View) 1.0mm maximum 1.0mm maximum Sketch C (Top View)
B0 10° maximum component rotation Sketch A (Side or Front Sectional View)
Component Rotation
Component Lateral Movement
Component Rotation
W2 max Measured at Hub
W1 Measured at Hub
B Min Dia C Dia D min
Dia A max
Dia N
DETAIL AA See detail AA
W3
Tape Width 8 12 16
Dia A Max. 330.0 330.0 330.0
Dim B Min. 1.5 1.5 1.5
Dia C +0.5/-0.2 13.0 13.0 13.0
Dia D Min. 20.2 20.2 20.2
Dim N Min. 178.0. 178.0. 178.0.
Dim W1 +2.0/-0 8.4 12.4 16.4
Dim W2 14.4 18.4 22.4
Dim W3 (LSL-USL) 7.9 ~ 10.4 11.9 ~ 15.4 15.9 ~ 19.4
Figure 8. MLP Tape and Reel
© 2009 Fairchild Semiconductor Corporation FIN210AC • Rev. 1.0.1 14
www.fairchildsemi.com
µSerDes™ FIN210AC — 10-Bit Serializer / Deserializer Supporting Cameras and Small Displays up to 48MHz
Physical Dimensions
0.15 C 5.00
B A
5.00 (0.76)
(0.25 )
PIN #1 IDENT
5.38 MIN
0.15 C
3.37 MAX 3.86 MIN
0.80 MAX 0.10 C (0.20)
0.20MIN X4
0.08 C 0.05 0.00
SEATING PLANE
C
0.28 MAX X40
0.50TYP
E
3.70 3.50 0.45 0.35
PIN #1 IDENT
PIN #1 ID
0.50 3.70 3.50
(DATUM B)
PIN #1 ID
(DATUM A)
0.18-0.30
0.50
0.10 0.05
CAB C
NOTES: A. CONFORMS TO JEDEC REGISTRATION MO-220, VARIATION WHHD-4. THIS PACKAGE IS ALSO FOOTPRINT COMPATIBLE WITH WHHD-5. B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M-1994. D. LAND PATTERN PER IPC SM-782. E. WIDTH REDUCED TO AVOID SOLDER BRIDGING. F. DIMENSIONS ARE NOT INCLUSIVE OF BURRS, MOLD FLASH, OR TIE BAR PROTRUSIONS. G. DRAWING FILENAME: MKT-MLP32Arev3.
Figure 9. 32-Lead, Molded Leadless Package (MLP) Order Number
FIN210ACMLX
Operating Temperature Range
-30 to 70°C
Package Description
32-Terminal Molded Leadless Package (MLP), Quad, JEDEC MO-220, 5mm Square
Eco Status
Green
Packing Method
Tape & Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/.
© 2009 Fairchild Semiconductor Corporation FIN210AC • Rev. 1.0.1 15
www.fairchildsemi.com
µSerDes™ FIN210AC — 10-Bit Serializer / Deserializer Supporting Cameras and Small Displays up to 48MHz
Physical Dimensions (Continued)
Figure 10. 42-Ball, Ball Grid Array (BGA) Package Note: Click here for tape and reel specifications, available at: http://www.fairchildsemi.com/products/analog/pdf/bga42_tr.pdf Order Number
FIN210ACGFX
Operating Temperature Range
-30 to 70°C
Package Description
42-Ball Ultra Small-Scale Ball Grid Array (USS-BGA), JEDEC MO-195, 3.5 x 4.5mm Wide, 0.5mm Ball Pitch
Eco Status
RoHS
Packing Method
Tape & Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/.
© 2009 Fairchild Semiconductor Corporation FIN210AC • Rev. 1.0.1 16 www.fairchildsemi.com
µSerDes™ FIN210AC — 10-Bit Serializer / Deserializer Supporting Cameras and Small Displays up to 48MHz
www.fairchildsemi.com
© 2009 Fairchild Semiconductor Corporation FIN210AC • Rev. 1.0.1
17
很抱歉,暂时无法提供与“FIN210ACMLX”相匹配的价格&库存,您可以联系我们找货
免费人工找货