FJC2098

FJC2098 FJC2098 Camera Strobe Flash Application • Complement to FJC1386 • High Collector Current • Low Collector-Emitter Saturation Voltage SOT-89 1 1. Base 2. Collector 3. Emitter NPN Epitaxial Silicon Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current (DC) Power Dissipation(TC=25°C) Junction Temperature Storage Temperature Value 50 20 6 5 0.5 150 - 55 ~ 150 Units V V V A W °C °C Electrical Characteristics TC=25°C unless otherwise noted Symbol BVCBO BVCEO BVEBO ICEO IEBO hFE VCE(sat) VBE(sat) COB Parameter Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Collector Output Capacitance Test Condition IC=50µA, IE=0 IC=1mA, IB=0 IE=50µA, IC=0 VCE=40V, VB=0 VEB=5V, IC=0 VCE=2V, IC=0.5A IC=4A, IB=0.1A IC=4A, IB=0.1A VCB=20V, IE=0, f=1MHz 23 120 Min. 50 20 6 0.5 0.5 390 1.0 1.2 V V pF Typ. Max. Units V V V µA µA hFE Classification Classification hFE Q 120 ~ 270 R 180 ~ 390 Marking JA Q hFE grade ©2003 Fairchild Semiconductor Corporation Rev. A2, February 2003 FJC2098 Typical Characteristics 14 1000 IB=200mA 12 VCE=2V IC[mA], COLLECTOR CURRENT 10 hFE, DC CURRENT GAIN Ta=125 C Ta=25 C 100 o o 8 Ta=-40 C o 6 4 IB=20mA 2 0 0 2 4 6 8 10 10 0.01 0.1 1 10 100 VCE[V], COLLECTOR-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain 10 10 IC=40IB VCE(sat)[V], SATURATION VOLTAGE 1 0.1 Ta=125 C Ta=25 C o o VBE(sat)[V], SATURATION VOLTAGE IC=40IB 1 Ta=-40 C Ta=25 C Ta=125 C o o o 0.01 Ta=-40 C o 1E-3 0.01 0.1 1 10 0.1 0.01 0.1 1 10 IC[A], COLLECTOR CURRENT IC[A], COLLECTOR CURRENT Figure 3. Collector-Emitter Saturation Voltage Figure 4. Base-Emitter Saturation Voltage 1.8 1.6 100 VCE=2V IE=0,f=1MHZ Cob[pF], OUTPUT CAPACITANCE 1.2 1.4 IC[A], COLLECTOR CURRENT 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.0 80 Ta=125 C o 25 C o -40 C o 60 40 20 0.2 0.4 0.6 0.8 1.0 0 1 10 100 VBE[V], BASE-EMITTER VOLTAGE VCB[V], COLLECTOR-BASE VOLTAGE Figure 5. Base-Emitter On Voltage Figure 6. Common-Base Open-Circuit Output Capacitance ©2003 Fairchild Semiconductor Corporation Rev. A2, February 2003 FJC2098 Package Dimensions SOT-89 4.50 ±0.20 1.65 ±0.10 C0.2 (0.50) 1.50 ±0.20 (0.40) ±0.20 2.50 0.50 ±0.10 1.50 TYP 1.50 TYP 0.40 ±0.10 0.40 +0.10 –0.05 (1.10) 4.10 ±0.20 Dimensions in Millimeters ©2003 Fairchild Semiconductor Corporation Rev. A2, February 2003 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ DISCLAIMER ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TruTranslation™ UHC™ UltraFET® VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2003 Fairchild Semiconductor Corporation Rev. I2