FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
June 2007
FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Features
■ Compact 4-pin surface mount package (2.4 mm ■
Applications (Continued)
■ Solid state relay ■ Lamp ballasts ■ Solenoid/valve controls ■ Static AC power switch ■ Incandescent lamp dimmers ■ Motor control
■ ■ ■
maximum standoff height) Peak blocking voltage 250V (FODM301X) 400V (FODM302X) 600V (FODM305X) Available in tape and reel quantities of 500 and 2500. Add “NF098” for new construction version with 260°C max. reflow temperature rating UL, C-UL and VDE certifications pending
Description
The FODM301X, FODM302X, and FODM305X series consists of a GaAs infrared emitting diode driving a silicon bilateral switch housed in a compact 4-pin mini-flat package. The lead pitch is 2.54mm. They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115V/240V operations.
Applications
■ Industrial controls ■ Traffic lights ■ Vending machines
Package Dimensions
4.40±0.20
ANODE 1
MAIN 4 TERMINAL
2.54±0.25
CATHODE 2 MAIN 3 TERMINAL
3.60±0.30 2.00±0.20
5.30±0.30
0.20±0.05 0.10±0.10
0.40±0.10
7.00 +0.2 –0.7
Note: All dimensions are in millimeters.
©2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
FODM30XX Rev. 1.0.5
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Symbol
TOTAL PACKAGE TSTG TOPR EMITTER IF (avg) IF (pk) VR PD DETECTOR IT(RMS) VDRM On-State RMS Current Off-State Output Terminal Voltage FODM3011/FODM3012 FODM3022/FODM3023 FODM3052/FODM3053 PD Power Dissipation (No derating required over operating temp. range) 70 250 400 600 300 mW mA (RMS) V Continuous Forward Current Peak Forward Current (1µs pulse, 300pps.) Reverse Input Voltage Power Dissipation (No derating required over operating temp. range) 60 1 3 100 mA A V mW Storage Temperature Operating Temperature -55 to +150 -40 to +100 °C °C
Parameter
Value
Units
2 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Electrical Characteristics (TA = 25°C)
Individual Component Characteristics Symbol
EMITTER VF IR IDRM dV/dt Input Forward Voltage Reverse Leakage Current Peak Blocking Current Either Direction Critical Rate of Rise of Off-State Voltage IF = 10mA VR = 3V, TA = 25°C Rated VDRM, IF = 0(1) IF = 0 (Figure 8)(2) All All All FODM3011, FODM3012, FODM3022, FODM3023 FODM3052, FODM3053 1,000 1.20 0.01 2 10 1.5 100 100 V µA nA V/µs
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
DETECTOR
Transfer Characteristics (TA = 25°C) Symbol
IFT
DC Characteristics
LED Trigger Current
Test Conditions
Main Terminal Voltage = 3V(3)
Device
FODM3011, FODM3022, FODM3052 FODM3012, FODM3023, FODM3053
Min.
Typ.*
Max.
10
Unit
mA
5
IH VTM
Holding Current, Either Direction Peak On-State Voltage Either ITM = 100mA peak Direction
All All
300 1.7 3
µA V
Isolation Characteristics Symbol
VISO
Characteristic
Steady State Isolation Voltage
Test Conditions
1 Minute, R.H. = 40% to 60%
Device
All
Min.
3750
Typ.*
Max.
Unit
VRMS
*All typicals at TA = 25°C Notes: 1. Test voltage must be applied within dv/dt rating. 2. This is static dv/dt. See Figure 1 for test circuit Commutating dv/dt is function of the load-driving thyristor(s) only. 3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT (10mA for FODM3011, FODM3022, and FODM3052, 5mA for FODM3012, FODM3023, and FODM3053) and absolute max IF (60mA).
3 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Performance Curves
Fig. 1 LED Forward Voltage vs. Forward Current
1.8 1.7 IDRM - LEAKAGE CURRENT (nA) 1.6 VF - FORWARD VOLTAGE (V) 1.5 1.4 1.3 1.2 1.1 1.0 0.9 1 10 IF - FORWARD CURRENT (mA) 100 TA = 25°C TA = 100°C 0.1 -40 1000 VDRM = 600V
Fig. 2 Leakage Current vs. Ambient Temperature
100
TA = -40°C
10
1
-20
0
20
40
60
80
100
T A - AMBIENT TEMPERATURE (°C)
Fig. 3 Holding Current vs. Ambient Temperature
10 I H - HOLDING CURRENT (NORMALIZED) NORMALIZED TO TA = 25°C I FT - TRIGGER CURRENT (NORMALIZED) 1.4 1.6
Fig. 4 Trigger Current vs. Ambient Temperature
VTM = 3V NORMALIZED TO TA = 25°C
1.2
1.0
1.0
0.8
0.6
0.1 -40
-20
0
20
40
60
80
100
T A - AMBIENT TEMPERATURE (°C)
0.8 -40
-20
0
20
40
60
80
100
T A - AMBIENT TEMPERATURE (°C)
4 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Performance Curves
Fig. 5 LED Current Required to Trigger vs. LED Pulse Width
12 IFT - LED TRIGGER CURRENT (NORMALIZED) TA =T °C 25 A NORMALIZED TO PW IN >> 100µs 10 V DRM- OFF-STATE OUTPUT TERMINAL VOLTAGE
Fig. 6 Off-State Output Terminal Voltage vs. Ambient Temperature
1.4 NORMALIZED TO T = 25°C A 1.3 1.2 (NORMALIZED) 1.1 1.0 0.9 0.8 0.7 0.6 -40
8
6
4
2
0 1 10 PW IN - LED TRIGGER PULSE WIDTH (°C) 100
-20
0
20
40
60
80
100
T A - AMBIENT TEMPERATURE (°C)
Fig. 7 On-State Characteristics
800 TA = 25°C 600 ITM - ON-STATE CURRENT (mA)
400
200
0
-200
-400
-600
-800 -4 -3 -2 -1 0 1 2 3 4 VTM - ON-STATE VOLTAGE (V)
5 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Typical Performance Curves
600V (FODM3052) (FODM3053) 400V (FODM3022) Vdc (FODM3023) 250V (FODM3011) (FODM3012) PULSE INPUT RTEST
R = 10 kΩ CTEST
MERCURY WETTED RELAY
D.U.T.
X100 SCOPE PROBE
1. The mercury wetted relay provides a high speed repeated pulse to the D.U.T. 2. 100x scope probes are used, to allow high speeds and voltages. 3. The worst-case condition for static dv/dt is established by triggering the D.U.T. with a normal LED input current, then removing the current. The variable RTEST allows the dv/dt to be gradually increased until the D.U.T. continues to trigger in response to the applied voltage pulse, even after the LED current has been removed. The dv/dt is then decreased until the D.U.T. stops triggering. τRC is measured at this point and recorded.
Vmax = 600 V (FODM3052, FODM3053) = 400 V (FODM3022, FODM3023) = 250 V (FODM3011, FODM3012) dv/dt = 0.63 Vmax
τRC
APPLIED VOLTAGE WAVEFORM
378 V (FODM3052, FODM3053) 252 V (FOMD3022, FODM3023) 158 V (FODM3011, FODM3012)
τRC
0 VOLTS
NOTE: This optoisolator should not be used to drive a load directly. It is intended to be a trigger device only.
Figure 8. Static dv/dt Test Circuit
378 =τ (FODM3053) RC (FODM3052) 252 =τ (FODM3023) RC (FODM3022) 158 =τ (FODM3011) RC (FODM3012)
RL Rin VCC 1 FODM3011 FODM3012 FODM3022 FODM3023 FODM3052 FODM3053 4 180 120 V 60 Hz
2
3
Figure 9. Resistive Load
ZL Rin VCC 1 FODM3011 FODM3012 FODM3022 FODM3023 FODM3052 FODM3053 4 180 2.4k 120 V 60 Hz 0.1 µF 3 C1
2
Figure 10. Inductive Load with Sensitive Gate Triac (IGT ≤ 15 mA)
6 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Rin VCC
1 FODM3022 FODM3023 FODM3052 FODM3053
4
360
470 HOT
0.05 µF 3
39 240 VAC 0.01 µF LOAD GROUND
2
In this circuit the “hot” side of the line is switched and the load connected to the cold or ground side. The 39Ω resistor and 0.01µF capacitor are for snubbing of the triac, and the 470Ω resistor and 0.05µF capacitor are for snubbing the coupler. These components may or may not be necessary depending upon the particular and load used.
Figure 11. Typical Application Circuit
7 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Ordering Information
Option
V_NF098 R1_NF098 R2_NF098 R1V_NF098 R2V_NF098
Description
VDE Approved Tape and Reel (500 units) Tape and Reel (2500 units) Tape and Reel (500 units) and VDE Approved Tape and Reel (2500 units) and VDE Approved
Note: To specify the new construction version with 260°C max reflow peak temperature rating: Add "NF098" to the end of the part number. The non NF098 version is rated for 230°C peak reflow temperature.
Marking Information
1
3011 V X YY R
3 4 5
2 6
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) One digit year code Two digit work week ranging from ‘01’ to ‘53’ Assembly package code
8 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Tape and Reel Information
P0 P2 D0 E
K0
t
A0 W1 B0 F
W
d
P
D1
2.54 Pitch
Description
Tape Width Tape Thickness Sprocket Hole Pitch Sprocket Hole Dia. Sprocket Hole Location Pocket Location
Symbol
W t P0 D0 E F P2
Dimensions
12.00 ±0.3 0.30±0.05 4.00±0.1 1.50±0.1 1.75±0.1 5.50±0.1 2.00±0.1 8.00±0.1 3.90±0.1 7.45±0.1 2.45±0.1 1.50±0.1 9.30±0.1 0.062±0.02 20˚ max
Pocket Pitch Pocket Dimension
P A0 B0 K0
Pocket Hole Dia. Cover Tape Width Cover Tape Thickness Max. Component Rotation or Tilt
D1 W1 d
Devices Per Reel
R1 R2
500 2500 178 mm (7") 330 mm (13")
Reel Diameter
R1 R2
9 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
Footprint Drawing for PCB Layout
0.80
1.00
6.50
2.54 Note: All dimensions are in mm.
Recommended Infrared Reflow Soldering Profile
• Peak reflow temperature: 260°C (package surface temperature) • Time of temperature higher than 245°C: 40 seconds or less • Number of reflows: 3
300 250 200 150
10 s 260°C 245°C
Temperature (°C)
40 s 100 50 0 0 50 100 150 200 250 300
Time (s)
10 FODM30XX Rev. 1.0.5
www.fairchildsemi.com
FODM30XX 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Build it Now™ CorePLUS™ CROSSVOLT ™ CTL™ Current Transfer Logic™ ® EcoSPARK FACT Quiet Series™ ® FACT ® FAST FastvCore™ FPS™ ® FRFET SM Global Power Resource Green FPS™
®
Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ Motion-SPM™ ® OPTOLOGIC ® OPTOPLANAR PDP-SPM™ ® Power220 ® Power247
POWEREDGE Power-SPM™ ® PowerTrench Programmable Active Droop™ ® QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ ® SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6
®
SuperSOT™-8 SyncFET™ ® The Power Franchise
™
TinyBoost™ TinyBuck™ ® TinyLogic TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ ® UHC UniFET™ VCX™
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only.
Rev. I29
No Identification Needed
Full Production
Obsolete
Not In Production
11 FODM30XX Rev. 1.0.5
www.fairchildsemi.com