FSA2258 — Low-Voltage Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
July 2009
FSA2258 Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Features
0.8Ω Typical On Resistance (RON) for +3.0V Supply 0.40Ω Maximum RON Flatness for +3.0V Supply -3db Bandwidth: > 50MHz Low ICCT Current Over an Expanded Control Input Range Packaged in 10-Lead MicroPak™ (1.6 x 2.1mm) Power-Off Protection on Common Ports Broad VCC Operating Range: 1.65V to 4.30V HBM JEDEC: JESD22-A114 - I/O to GND: 9kV - Power to GND: 16kV
Description
The FSA2258 is a high-performance, dual, Single Pole Double Throw (SPDT) analog switch that features low RON of 0.8Ω (typical) at 3.0V VCC. The FSA2258 operates over a wide VCC range of 1.65V to 4.3V and is designed for break-before-make operation. The select input is TTL-level compatible. The FSA2258 features very low quiescent current even when the control voltage is lower than the VCC supply. This feature suits mobile handset applications by allowing direct interface with baseband processor general-purpose I/Os with minimal battery consumption.
IMPORTANT NOTE:
For additional information, analogswitch@fairchildsemi.com. please contact
Applications
Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box
Ordering Information
Part Number Top Mark
FSA2258L10X JS
Operating Temperature Range
-40 to +85°C
Eco Status
Green
Package
10-Lead MicroPak™ 1.6 x 2.1mm, JEDEC MO-255B
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Analog Symbol
1B0 1B1 2B0 2B1 2A S2 1A S1
Figure 1.
FSA2258
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Pin Configuration
Vcc 10 1B0 1B1 2B0 2B1 1 2 3 4 5 GND
Figure 2. 10-Lead MicroPak™ (Top-Through View)
9 8 7 6
1A S1 S2 2A
Pin Descriptions
Pin #
1 2 3 4 5 6 7 8 9 10
Name
1B0 1B1 2B0 2B1 GND 2A S2 S1 1A VCC Data Ports Data Ports Data Ports Data Ports Ground Data Ports Switch Select Pins Switch Select Pins Data Ports Supply Voltage
Description
Truth Table
Control Input, Sn
LOW Logic Level HIGH Logic Level
Function
nB0 connected to nA nB1 connected to nA
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 2
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.
Symbol Parameter
VCC VSW VIN IIK ISW ISWPEAK TSTG TJ TL Supply Voltage Switch I/O Voltage
(1) (1)
Min.
-0.5 1B0, 1B1, 2B0, 2B1, 1A, 2A Pins S1, S2 -0.5 -0.5
Max.
5.5 VCC + 0.3 5.5 -50 350 500
Units
V V V mA mA mA °C °C °C
Control Input Voltage
Input Clamp Diode Current Switch I/O Current (Continuous) Peak Switch Current (Pulsed at 1ms Duration, 50
tON
ns Figure 6 Figure 7 ns
tOFF
Turn-Off Time
tBBM
nB0 or BreaknB1=1.5V, Before-Make RL=50Ω, (6) Time CL=35pF Charge Injection(6) Off Isolation(6) Crosstalk(6) -3db Bandwidth(6) Total Harmonic Distortion + Noise(6) CL=1.0nF, VS=0V, RS=0Ω
ns
Figure 8
Q OIRR Xtalk BW
pC dB dB MHz
Figure 12 Figure 10 Figure 11 Figure 9
f=100kHz, 1.65 to 4.30 RL=50Ω, CL=0pF f=100kHz, 1.65 to 4.30 RL=50Ω, CL=0pF RL=50Ω, CL=0pF 1.65 to 4.30 f=20Hz to 20kHz, 1.65 to 4.30 RL=32Ω, VIN=2VPP
THD+N
.06
%
Figure 15
Note: 6. Guaranteed by characterization, not production tested
Capacitance
All capacitance specifications are guaranteed by characterization and are not production tested.
Symbol
CIN COFF CON
Parameter
Control Pin Input Capacitance B Port Off Capacitance A Port On Capacitance
Conditions VCC (V)
f=1MHz f=1MHz f=1MHz 0 3.3 3.3
TA=+25ºC Min. Typ.
1.5 30 120
Unit
pF pF pF
Figure
Figure 13 Figure 13 Figure 14
Max.
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 5
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Test Diagrams
VON
NC
nBn V IN
GND
I A(OFF)
A
nA
V IN
Select V Sel =
I ON
GND
Select VSel =
GND
0 orVcc
R ON = VON / ION
Figure 3.
0 or Vcc
**Each switch port is tested separately.
On Resistance
Figure 4.
Off Leakage (Ports Tested Separately)
NC
I A(ON)
nBn V IN
nA
A
V IN Select VSel =
GND
GND
RS
CL
GND
RL
V OUT
0 or Vcc
V Sel
GND
Figure 5.
On Leakage
Figure 6.
Test Circuit Load
tRISE = 2.5ns VCC Input - VSel GND VOH Output - VOUT VOL 10% 90% VCC /2 90% VCC /2
tFALL = 2.5ns
10% 90%
90%
tON
tOFF
Figure 7.
Turn-On / Turn-Off Waveforms
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 6
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Test Diagrams (Continued)
tRISE = 2.5ns nB n V IN
GN D
nA V cc
V IN
GN D
CL
G ND
VOUT
R
L
Input - VSel
0V V OUT 0.9*V out 10%
90% V cc /2
RS
0.9*V ou t
V S el
GN D
RL and CL are functions of the application environment (50, 75, or 100 ). CL includes test fixture and stray capacitance.
Figure 8. Break-Before-Make Interval Timing
tBBM
Network Analyzer
RS
GND
V IN
V S
GND
VSel
GND GND
VOUT RT
GND
RL and CL are functions of the application environment (50, 75, or 100 ). L CL includes test fixture and stray capacitance.
Figure 9.
Bandwidth
Network Analyzer
RS
GND
RT VSel
GND GND
VS
GND
VOUT
GND
RT
GND
RS and RT are functions of the application environment (50, 75, or 100 ).
Off-Isolation = 20 Log (VOUT / VIN ) -
Figure 10.
Channel Off Isolation
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 7
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Test Diagrams (Continued)
Network Analyzer
RS VIN VS
GND
GND
VSel
GND GND
RT
GND
RT
GND
V OUT
RS and RT are functions of the application CROSSTALK = 20 Log (VOUT / VIN ) environment (50, 75, or 100 ).
Figure 11.
Adjacent Channel Crosstalk
Generator B VS RS GND nSn VSEL GND VIN mA CL GND VOUT
VCC Input – VSEL 0V ΔVOUT VOUT Off On Off
CL includes test fixture and stray capacitance
Q = ΔVOUT / CL
Figure 12.
Charge Injection Test
nBn
Capacitance Meter
f = 1MHz nBn
nSn VSel =
Capacitance Meter
nBn nSn V Sel = nBn
0 or Vcc
f = 1MHz
0 orV cc
Figure 13.
Channel Off Capacitance
Figure 14.
Channel On Capacitance
Audio Analyzer
RS
GND
V IN
VS
GND
V CNTRL
GND GND
V OUT RT
GND
VSel =
0 or Vcc
RS and RT are functions of the application environment (see AC Tables for specific values).
Figure 15.
Total Harmonic Distortion
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 8
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
Physical Dimensions
0.10 C
2X
2.10
A B (0.11) 0.56 1.62
KEEPOUT ZONE, NO TRACES OR VIAS ALLOWED
1.60
PIN1 IDENT IS 2X LONGER THAN OTHER LINES 0.10 C
1.12
TOP VIEW
2X
0.50
(0.35) 10X (0.25) 10X
RECOMMENDED LAND PATTERN
0.55 MAX 0.05 C 0.05 C C 0.05 0.00 (0.20) 0.35 0.25 (0.15) 0.35 0.25
SIDE VIEW
D 0.65 0.55
1 4
DETAIL A 0.35 0.25
(0.36)
0.56
5
DETAIL A 2X SCALE
NOTES: A. PACKAGE CONFORMS TO JEDEC REGISTRATION MO-255, VARIATION UABD . B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. D. PRESENCE OF CENTER PAD IS PACKAGE SUPPLIER DEPENDENT. IF PRESENT IT IS NOT INTENDED TO BE SOLDERED AND HAS A BLACK OXIDE FINISH. E. DRAWING FILENAME: MKT-MAC10Arev5.
10
(0.29) 0.50
9
6
0.25 9X 0.15 1.62
0.35 9X 0.25
0.10 0.05
CAB C
ALL FEATURES
BOTTOM VIEW
Figure 16. 10-Lead MicroPak™
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/.
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 9
FSA2258 — Low-Voltage, Dual-SPDT (0.8Ω) Analog Switch with 16kV ESD
© 2008 Fairchild Semiconductor Corporation FSA2258 • Rev. 1.0.2
www.fairchildsemi.com 10