FSAV331MTC

FSAV331 Dual Channel 4:1 Video Switch April 2004 Revised August 2005 FSAV331 Dual Channel 4:1 Video Switch General Description The Fairchild video switch FSAV331 is a dual 4:1 high speed video switch which can be configured as either multiplexer or demultiplexer. Low On Resistance allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When the OE Pin is LOW, S0 and S1 connect the A Port to the selected B Port output. When the OE Pin is HIGH, the switch is OPEN and a HIGH-Impedance state exists between the two ports. Features O Wide bandwidth: 300 MHz O 73 dB non adjacent channel crosstalk at 10MHz O 56 dB Off Isolation at 10MHz O 3: typical On Resistance (RON) O Low power consumption (3uA maximum) O Control input: TTL compatible Applications O Y/C video or CVBS video switch in LCD, plasma, and projector displays Ordering Code: Order Number Package Number FSAV331QSC FSAV331MTC MQA16A MTC16 Package Description 16-Lead Quarter Size Small Outline Package (QSOP), JEDEC MO-137, 0.150" Wide 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Diagram Connection Diagram Truth Table Pin Descriptions Pin Name OE1, OE2 S0, S1 A B1, B2, B3, B4 S1 X S0 X X L H L H OE1 OE2 H X L L L L X H L L L L Function Disconnect 1A Disconnect 2A A = B1 A = B2 A = B3 A = B4 Description Bus Switch Enables Select Inputs Bus A Bus B X L L H H © 2005 Fairchild Semiconductor Corporation DS500802 www.fairchildsemi.com FSAV331 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Switch Voltage (Note 2) DC Input Voltage (VIN) (Note 2) DC Input Diode Current DC Output Current Storage Temperature Range (TSTG) ESD (Human Body Model) Recommended Operating Conditions (Note 3) Supply Voltage (VCC) Control Input Voltage Switch Input Voltage Operating Temperature Thermal Resistance (TSSOP) (QSOP) 100qC/W 127qC/W 4.75V to 5.25V 0V to VCC 0V to VCC 0.5V to +7.0V 0.5V to VCC + 0.5V 0.5V to +7.0V 50 mA 128 mA 40qC to +85qC 65qC to +150 qC 2000V Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The Recommended Operating Conditions tables will define the conditions for actual device operation. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Unused control inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics All typical value are for VCC = 5V @ 25qC unless otherwise specified. Symbol VANALOG VIK VIH VIL IIN IOZ RON Parameter Analog Signal Range Clamp Diode Voltage Input Voltage HIGH Input Voltage LOW Control Input Leakage OFF-STATE Leakage Current Switch On Resistance (Note 4) ICC Quiescent Supply Current VCC (V) 4.75 - 5.25 4.75 4.75 - 5.25 4.75 - 5.25 5.25 5.25 4.75 4.75 5.25 3.3 5.0 2.0 0.8 TA = 40 qC to +85 qC Min 0 Typ Max 2.0 V V V V IIN = 18 mA Units Conditions 1.2 r1.0 r1.0 7.0 10.0 3.0 PA PA : : PA VIN = 0V to VCC 0 d A, B d VCC VIN = 1V, RL = 75:, ION = 13 mA VIN = 2V, RL = 75:, ION = 26 mA VIN = 0V or VCC, IOUT = 0V Note 4: Measured by the voltage drop between A and B Pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B Ports). www.fairchildsemi.com 2 FSAV331 AC Electrical Characteristics Symbol tON Parameter Turn ON Time S-to-Bus B Output Enable Time OE-to-A or B tOFF Turn OFF Time S-to-Bus B Output Disable Time OE-to-A or B tPLH, tPHL DG DP OIRR XTALK BW Propagation Delay (Note 5) Select-to-Bus A Delay Differential Gain Differential Phase Non Adjacent OFF-Isolation Non Adjacent Channel Crosstalk VCC (V) 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 4.75 to 5.25 0.26 0.23 TA = 40 qC to +85 qC Min 1.0 1.0 1.0 1.0 Typ Max 5.3 ns 5.3 5.8 ns 5.5 0.1 ns 5.0 % Degree dB dB MHz VI OPEN RL = 150:, f = 3.58MHz RL = 150:, f = 3.58MHz f = 10MHz, RL = 150: RL = 150:, f = 10MHz RL = 150: Figure 3 Figure 4 Figure 5 VI = 7V for tPLZ and VI = OPEN for tPHZ VI = 7V for tPZL and VI = OPEN for tPZH Figure Units Conditions Number Figures 1, 2 Figures 1, 2 Figures 1, 2 56.0 73.0 300 3dB Bandwidth Note 5: This specification is guaranteed by design. Capacitance Symbol CIN CON COFF Parameter Control Pin Input Capacitance A/B On Capacitance Port B OFF Capacitance Port A OFF Capacitance TA = 40 qC to +85 qC Typ 3.0 39.0 5.0 13.0 pF pF pF pF VCC and OE = 5.0V VCC = 5.0V VCC = 5.0, OE = 0V Units Conditions 3 www.fairchildsemi.com FSAV331 AC Loading and Waveforms Note: Input driven by 50 : source terminated in 50 : Note: CL includes load and stray capacitance Note: Input PRR = 1.0 MHz, tW = 500 ns FIGURE 1. AC Test Circuit FIGURE 2. AC Waveforms FIGURE 3. OFF Isolation Test FIGURE 4. Crosstalk Test FIGURE 5. Bandwidth Test www.fairchildsemi.com 4 FSAV331 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Quarter Size Small Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Package Number MQA16A 5 www.fairchildsemi.com FSAV331 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 Technology Description The Fairchild Switch family derives from and embodies Fairchild’s proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. www.fairchildsemi.com 6 FSAV331 Dual Channel 4:1 Video Switch DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION As used herein: provided in the labeling, can be reasonably expected to result in significant injury to the user. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or 2. A critical component is any component of a life support (b) support or sustain life, or (c) whose failure to perform device or system whose failure to perform can be reasonwhen properly used in accordance with instructions for use ably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of terms Datasheet Identification Product Status Advance Information Preliminary Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. No Identification Needed Full Production Obsolete Not In Production 7 www.fairchildsemi.com