GBPC25

GBPC 12, 15, 25, 35 SERIES Discrete POWER & Signal Technologies GBPC 12, 15, 25, 35 SERIES Features • Integrally molded heatsink provided very low thermal resistance for maximum heat dissipation. Surge overload rartings from 300 amperes to 400 amperes. Isolated voltage from case to lead over 2500 volts. H OL E F OR #10 SCR EW 0.22(5.59) 0.20(5.08) D IA 1.14(29.0) 1.12(28.5) 0.692(17.6) 0.612(15.5) GBPC 0.25(6.35) 1.14(29.0) 1.12(28.5) 0.692(17.6) 0.612(15.5) + ~ ~ – 0.752(19.1) 0.672(17.1) • 0.602(15.3) 0 .522(13.3) 0.442(11.23) 0.432(10.97) • 0.96(24.5) 0.85(21.5) H OLE FOR #10 SCR EW 0.22(5.59) 0.20(5.08) D IA 1.14(29.0) 1.12(28.5) 0.752(19.1) 0.672(17.1) Suffix "W" Wire Lead Structure – GBPC-W 1.14(29.0) 1.12(28.5) Suffix "M" Terminal Location Face to Face ~ 0.752(19.1) 0.672(17.1) 0.442(11.23) 0.432(10.97) 0.042(1.07) 0.038(0.97) ~ 1.2(30.5) MI N + Dimensions are in: inches (mm) 0.490(12.4) 0.410(10.4) 12, 15, 25, 35 Ampere Glass Passivated Bridge Rectifiers Absolute Maximum Ratings* Symbol IO Averag e Rectified Curr @ T A = 5 5°C en t TA = 25°C unless otherwise noted Parameter GBPC 12 GBPC 15 GBPC 25 GBPC 35 Value 12 15 25 35 300 400 83.3 666 1.5 -55 to +150 Units A A A A A A W m W/°C °C/W °C °C if(surge) PD RθJL Tstg TJ P eak F or w ard Surge C u rrent GBPC 15, 25 12, 8.3 m s single half- sine- w ave Superimposed on rate d load (JEDEC method GBPC35 ) Total D evice Dissipati on Derate a bove 2°C 5 Ther m a l Resistance, J u nction to Lead Storag e Tem perature Range Operati n g Junction Temperature -55 to +150 *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. ©1999 Fairchild Semiconductor Corporation GBPC 12, 15, 25, 35 SERIES ,v. A Re GBPC 12, 15, 25, 35 SERIES Glass Passivated Bridge Rectifiers (continued) Electrical Characteristics Parameter 005 Peak Repetitive Reverse Voltage Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage Drop, per bridge @ 6.0 A GBPC12 @ 7.5 A GBPC15 @ 12.5 A GBPC25 @ 17.5 A GBPC35 2 I t rating for fusing GBPC12,15,25 t < 8.3 ms GBPC35 Typical Junction Capacitance, per leg VR = 4.0V, GBPC12,15,25 f = 1.0 MHz GBPC35 50 35 50 TA = 25°C unless otherwise noted Device 01 100 70 100 02 200 140 200 04 400 280 400 5.0 500 06 600 420 600 08 800 560 800 10 1000 700 1000 Units V V V µA µA 1.1 V A2Sec A2Sec pF pF 375 660 180 200 Typical Characteristics Forward Current Derating Curve 40 GBPC35 Non-Repetitive Surge Current PEAK FORWARD SURGE CURRENT (A) 400 FORWARD CURRENT (A) 30 GBPC25 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 200 G BPC35 20 GBPC12-GBPC15 100 GBPC12-GBPC25 10 50 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (º C) 175 20 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 F orward Characteristics 200 100 FORWARD CURRENT (A) G BPC25 GBPC12-GBPC15 G BPC35 Reverse Characteristics 100 REVERSE CURRENT ( µ A) T A = 125 º C 10 10 1 TA = 2 5º C Pulse Width = 300µs 2% Duty Cycle 1 TA = 2 5º C 0.1 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) 1.8 2 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) GBPC 12, 15, 25, 35 SERIES , Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.