GBU8J

GBU8A - GBU8K GBU8A - GBU8K 0.12 5 X 45 O (3.2) Typ Features • • • Surge overload rating: 200 amperes peak. Reliable low cost construction utilizing molded plastic technique. Ideal for printed circuit board. 0.740 (18.8) 0.720 (18.3) 0.07 5 R (1.9) 0.880 (22.3) 0.860 (21.8) 0.1 60 (4 .1 ) 0.1 40 (3 .5 ) 0.02 0 R TYP 0.3 10 (7 .9 ) 0.2 90 (7 .4 ) 0.0 85 (2 .1 6 ) 0.0 65 (1 .6 5 ) + + + 0.710 (18.0) 0.690 (17.5) 0.100 (2.54) 0.085 (2.16) 0.080 (2.03) 0.065 (1.65) ~ ~ 0.080 (2.03) 0.060 (1.52) GBU 0.050 (1.27) 0.040 (1.02) 0.05 0 ( 1. 3) 0.04 0 ( 1. 0) 0.21 0 ( 5. 3) 0.19 0 ( 4. 8) 8.0 Ampere Bridge Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RqJA Tstg TJ Average Rectified Current TA = 25°C unless otherwise noted Dimensions are in: inches (mm) Parameter @ TA = 100°C @ T A = 4 5° C Va lue 8.0 6.0 200 6.9 55 18 -55 to +150 -55 to +150 Units A A A W mW /°C °C/W °C °C Peak Forward Surge Current 8.3 m s single half-sine-wave Superimposed on rated load (JEDEC m ethod) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Am bient,** per leg Storage Te m perature Range Operating Junction Tem perature *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.5 x 0.5" (12 x 12 mm). Electrical Characteristics Parameter TA = 25°C unless otherwise noted Device 8A 8B 100 70 100 8D 200 140 200 5.0 500 1.0 166 8G 400 280 400 8J 600 420 600 8K 800 560 800 50 35 50 Units V V V mA mA V 2 A Sec Peak Repetitive Revers e Voltage Maximum RMS Input Voltage DC Revers e Voltage (Rated VR) Maximum Revers e Leakage, per element @ rated VR TA = 25°C TA = 100°C Maximum Forward Voltage Drop, per element @ 8.0 A 2 I t rating for fusing t < 8.35 ms ã1998 Fairchild S emiconductor C orporation GBU8A-GBU8M, Rev. A GBU8A - GBU8K Bridge Rectifiers (continued) Typical Characteristics Forward Current Derating Curve 8 FORWARD CURRENT (A) F orward Characteristics 100 FORWARD CURRENT (A) 6 HEAT-SINK MOUNTING, TC 4"x4"x0.15" COPPER PLATE 10 4 2 MOUNTED ON PC BOARD, TA 0.5" (12.7mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD 1 TA = 2 5º C Pulse Width = 300µs 1% Duty Cycle 0 0 50 100 TEMPERATURE ( º C) 150 0.1 0.7 0.8 0.9 1 1.1 1.2 FORWARD VOLTAGE (V) 1.3 1.4 Reverse Characteristics 10 REVERSE CURRENT ( µ A) T C = 100 º C Non-Repetitive Surge Current 200 FORWARD SURGE CURRENT (A) 160 1 120 80 T A = 105 º C 0.1 TA = 2 5 º C 40 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Junction Capacitance 400 CAPACITANCE (pF) 100 50 TA = 2 5º C f = 1.0 MHz Visg = 50m Vp-p 10 1 5 10 REVERSE VOLTAGE (V) 50 100 GBU8A-GBU8M, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.