HLMP-1719L

SUPER BRIGHT AllnGaP T-100 (3 mm) LOW CURRENT LED LAMP - Tinted & Diffused PACKAGE DIMENSIONS SUPER RED SUPER YELLOW HLMP-1700L HLMP-1719L Ø0.137 (3.48) Ø0.113 (2.88) 0.122 (3.1) 0.106 (2.7) 0.047 (1.2) 0.032 (0.8) 0.189 (4.8) 0.165 (4.2) FEATURES • Popular T-100 package with 100 mil. lead spacing • Super high brightness at low current 0.059 (1.5) 0.032 (0.8) 1.040 (26.4) MIN (2 mA) • Solid state reliability • Tinted and diffused (ANODE) • CMOS and TTL compatible 0.040 (1.00) MIN 0.100 (2.54) 0.020 (0.51) SQ. (2X) DESCRIPTION NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Lead spacing is measured where the leads emerge from the package. 3. Protruded resin under the flange is 1.5 mm (0.059") max. These T-100 super bright low current lamps have a moderate viewing angle of 50°. The HLMP-17XXL series is made with an AllnGaP LED, which delivers performance, reliability and brightness superior to that of standard products. ABSOLUTE MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature Lead Soldering Time Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation (TA = 25°C unless otherwise specified) Symbol TOPR TSTG TSOL IF IF VR PD Rating -55 to +100 -55 to +100 260 for 5 sec 7.5 150 5 25 Unit °C °C °C mA mA V mW 1 of 4 11/17/99 300002A SUPER BRIGHT AllnGaP T-100 (3 mm) LOW CURRENT LED LAMP - Tinted & Diffused SUPER RED SUPER YELLOW ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) 640 631 20 50 590 589 15 50 IF = 2 mA IF = 2 mA 2.4 2.0 2.4 2.0 IF = 2 mA 5 7.5 6 9.5 IF = 2 mA HLMP-1700L (TA =25°C) HLMP-1719L Condition IF = 2 mA HLMP-1700L HLMP-1719L TYPICAL PERFORMANCE CURVES 10 9 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 2 mA) IF - FORWARD CURRENT (mA) 8 7 6 5 4 3 2 1 0 1.5 2.0 0 0 2 4 6 8 10 HLMP-1719L HLMP-1700L 8.0 10.0 HLMP-1719L 6.0 4.0 2.0 HLMP-1700L VF - FORWARD VOLTAGE (V) IF - DC CURRENT PER LED (mA) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. Forward Current 2 of 4 11/17/99 300002A SUPER BRIGHT AllnGaP T-100 (3 mm) LOW CURRENT LED LAMP - Tinted & Diffused SUPER RED SUPER YELLOW HLMP-1700L HLMP-1719L HLMP-1719L HLMP-1700L 1.0 -20 RELATIVE INTENSITY -30 -40 -50 0.5 -60 -70 -80 -90 100 550 600 WAVELENGTH - nm 650 700 80 60 40 20 0 20 40 60 80 -10 0 10 20 30 40 50 60 70 80 90 100 0 Fig. 3 Relative Intensity vs Peak Wavelength Fig. 4 Radiation Diagram 3 of 4 11/17/99 300002A SUPER BRIGHT AllnGaP T-100 (3 mm) LOW CURRENT LED LAMP - Tinted & Diffused DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com © 2000 Fairchild Semiconductor Corporation 4 of 4 11/17/99 300002A