HLMP-3301

T-1 3/4 (5 mm) SOLID STATE LAMPS HIGH EFF. RED HIGH EFF. RED HLMP-3300 HLMP-3301 HIGH EFF. RED HIGH EFF. RED STANDARD RED FEATURES • Popular, general purpose lamps • Wide and narrow viewing angle devices for direct view or backlighting C L HLMP-3315 HLMP-3316 FLV110 PACKAGE DIMENSIONS • Solid state reliability • Sturdy leads for easy assembly 0.200 (5.08) 0.180 (4.57) 0.040 (1.02) SEE NOTES DESCRIPTION The HLMP-33XX series consists of high efficiency red T-1 3/4 lamps with a viewing angle of 35° or 65°. FLV110 is a low profile standard red T-1 3/4 lamp with a diffused lens, providing a viewing angle of 70°. NOTES: 1. ALL DIMENSIONS ARE IN INCHES (mm). 0.050 (1.27) 0.100 (2.54) Ø 0.230 (5.84) 0.050 (1.27) REF. 0.100 (2.54) REF. 1.00 (25.4) MIN 2. TOLERANCES ARE ±.010” INCH UNLESS SPECIFIED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT .040” (1 mm) DOWN THE LEADS. 4. DIMENSIONS X. PACKAGE HEIGHT HLMP = .330 (8.38)/.350 (8.89) FLV = .275 (6.98)/.295 (7.49) 5. FLV FLANGE HEIGHT = 0.040 (1.02) 0.060 (1.53) 0.023 (0.58) 0.017 (0.43) SQ. TYP. (2X) FLAT DENOTES CATHODE ABSOLUTE MAXIMUM RATING Parameter Power Dissipation Average Forward Current Peak Forward Current (TA =25°C) HLMP33XX 135 30 90 5 5 -55 to +100 -55 to +100 FLV110 135 30 90 5 5 -55 to +100 -55 to +100 UNITS mW mA mA V sec °C °C (1 µS pulsewidth, 0.3% duty cycle)(FLV110 1 amp) Reverse Voltage Lead Soldering Time at 260° C Operating Temperature Storage Temperature  2001 Fairchild Semiconductor Corporation DS300005 2/27/01 1 OF 4 www.fairchildsemi.com T-1 3/4 (5 mm) SOLID STATE LAMPS ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Reverse Voltage (V) Viewing Angle (°) * For FLV110 Test IF = 20mA 3.0 2.2 635 5 65 3.0 2.2 635 5 65 3.0 2.2 635 5 35 3.0 2.2 635 5 35 2.0 1.6 660 5 70 IF = 10mA IR = 100µA IF = 10mA 2.0 3.5 4.0 7.0 12 18 20 35 0.8* 3.0* IF = 10mA HLMP-3300 (TA =25°C) HLMP-3315 HLMP-3316 FLV110 Condition IF = 10mA HLMP-3301 www.fairchildsemi.com 2 OF 4 2/27/01 DS300005 T-1 3/4 (5 mm) SOLID STATE LAMPS TYPICAL PERFORMANCE CURVES (TA =25°C) 90 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) 80 AlGaAs RED IF - FORWARD CURRENT (mA) 70 60 50 40 30 20 10 0 1.0 2.0 3.0 4.0 5.0 HER 2.0 1.5 HER 1.0 AlGaAs RED 0.5 0.0 0 5 10 15 20 25 30 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 50 1.0 AlGaAs RED IF - FORWARD CURRENT (mA) 40 RELATIVE INTENSITY HER, AlGaAs RED 30 0.5 20 HER 10 0 500 550 600 650 700 750 0 0 20 40 60 85 100 WAVELENGTH (nm) TA - AMBIENT TEMPERATURE (˚C) Fig. 3 Relative Intensity vs. Peak Wavelength Fig. 4 Current Derating Curve DS300005 2/27/01 3 OF 4 www.fairchildsemi.com T-1 3/4 (5 mm) SOLID STATE LAMPS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 4 OF 4 2/27/01 DS300005