HLMP-6505A

SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS HIGH EFF. RED YELLOW GREEN AIGaAs RED HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A HLMP-Q101A Water Clear Water Clear Water Clear Water Clear Red Diffused MV6700A MV6300A MV6400A HLMP-Q150A HLMP-Q155A Red Diffused Yellow Diffused Green Diffused Red Diffused Water Clear PACKAGE DIMENSIONS .087 (2.2) .079 (2.0) .024 (.6) .016 (.4) .276 (7.0) MIN FEATURES • Subminiature T-3/4 transfer molded • Low package profile • Axial leads • Wide viewing angle .091 (2.3) .083 (2.1) • SMT versions DIA .010 (.26) .002 (.06) .075 (1.9) .063 (1.6) .020 (.5) .012 (.3) .058 (1.48) .050 (1.28) .056 (1.44) .048 (1.24) DESCRIPTION These T-3/4 subminiature LED lamps feature a squarebase, transfer molded package for surface mount applications. A tinted diffused or water clear epoxy lens — available in AIGaAs red, high-efficiency red, green, and yellow — produces wide-angle beam emission and sharp on/off contrast. They are available with gullwing lead bends for top mounting, as well as yoke lead bends and Z-bends for mounting to the back of a PCB. .031 (.78) .023 (.58) CATHODE MARK (COLOR STRIPE ON SIDE OF PACKAGE) NOTES: ALL DIMENSIONS ARE IN INCHES (mm). ABSOLUTE MAXIMUM RATING c HLMP-Q101A HLMP-Q105A HLMP-Q150A HLMP-Q155A 85 30 300 5 -20 to +100 -20 to +100 Parameter Power Dissipation Average Forward Current Peak Forward Current (1 µS pulsewidth, 0.1% DF) Lead Soldering Time at 260°C Operating Temperature Storage Temperature HLMP-6305A MV6700A 135 30 90 5 -55 to +100 -55 to +100 HLMP-6405A MV6300A 85 20 60 5 -55 to +100 -55 to +100 HLMP-6505A MV6400A 135 30 90 5 -50 to +100 -50 to +100 Units mW mA mA sec °C °C © 2003 Fairchild Semiconductor Corporation Page 1 of 6 7/14/03 SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS HIGH EFF. RED YELLOW GREEN AIGaAs RED HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A HLMP-Q101A Water Clear Water Clear Water Clear Water Clear Red Diffused MV6700A MV6300A MV6400A HLMP-Q150A HLMP-Q155A Red Diffused Yellow Diffused Green Diffused Red Diffused Water Clear ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) Part Number QTLPLuminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Spectral Line Half Width (nm) Reverse Voltage (V) Viewing Angle (°) 3.0 1.8 635 40 5 50 3.0 2.0 585 36 5 50 3.0 2.0 565 28 5 50 1.8* 1.6* 660 20 5 50 *Tested at IF = 1mA IF = 10mA IF = 10mA IR = 100µA IF = 10mA 1.0 3.0 1.0 3.0 1.0 3.0 1.0* 1.8* *Tested at IF = 1mA IF = 10mA MV6700A MV6300A MV6400A HLMP-Q150A Condition IF = 10mA ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) Part Number QTLPLuminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Spectral Line Half Width (nm) Reverse voltage (V) Viewing Angle (°) 3.0 1.8 635 40 5 25 3.0 2.0 585 36 5 25 3.0 2.0 565 28 5 25 2.4** 1.8** 660 20 5 50 2.4**/1.8* 1.8**/1.6* 660 20 5 25 3.0 12.0 3.0 12.0 3.0 12.0 22** 45** 20.0**/2.0* 50.0**/4.0* HLMP6305A HLMP6405A HLMP6505A HLMPQ101A HLMP-Q105A/ Q155A Condition IF = 10mA **Tested at IF = 1mA **Tested at IF = 20mA IF = 10mA *Tested at IF = 1mA **Tested at IF = 20mA IF = 10mA IF = 10mA IR = 100µA IF = 10mA © 2003 Fairchild Semiconductor Corporation Page 2 of 6 7/14/03 SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS HIGH EFF. RED YELLOW GREEN AIGaAs RED HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A HLMP-Q101A Water Clear Water Clear Water Clear Water Clear Red Diffused MV6700A MV6300A MV6400A HLMP-Q150A HLMP-Q155A Red Diffused Yellow Diffused Green Diffused Red Diffused Water Clear TYPICAL PERFORMANCE CURVES Fig. 2 Relative Luminous Intensity vs. DC Forward Current 2.5 Fig. 1 Forward Current vs. Forward Voltage 90 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 10 mA) 80 AlGaAs RED IF - FORWARD CURRENT (mA) 70 60 50 40 30 20 10 0 1.0 YELLOW HER 2.0 HER YELLOW GREEN 1.5 1.0 AlGaAs RED 0.5 GREEN 0.0 2.0 3.0 4.0 5.0 0 5 10 15 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength 1.0 GREEN YELLOW AlGaAs RED RELATIVE INTENSITY 0.5 HER 0 500 550 600 650 700 750 WAVELENGTH (nm) © 2003 Fairchild Semiconductor Corporation Page 3 of 6 7/14/03 SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS HIGH EFF. RED YELLOW GREEN AIGaAs RED HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A HLMP-Q101A Water Clear Water Clear Water Clear Water Clear Red Diffused MV6700A MV6300A MV6400A HLMP-Q150A HLMP-Q155A Red Diffused Yellow Diffused Green Diffused Red Diffused Water Clear RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.106 (2.68) 0.035 (0.89) 0.035 (0.89) 0.035 (0.89) For Gullwing Lead Bend RECOMMENDED REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX +5° C/s MAX -5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX © 2003 Fairchild Semiconductor Corporation Page 4 of 6 7/14/03 SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS HIGH EFF. RED YELLOW GREEN AIGaAs RED HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A HLMP-Q101A Water Clear Water Clear Water Clear Water Clear Red Diffused MV6700A MV6300A MV6400A HLMP-Q150A HLMP-Q155A Red Diffused Yellow Diffused Green Diffused Red Diffused Water Clear GULLWING LEAD CONFIGURATION .087 (2.2) .079 (2.0) CATHODE ANODE FEATURES • Available in Gullwing, Yoke and Z-bend lead formings • Compatible with automatic placement equipment • Compatible with vapor phase reflow soldering processes • Long life — solid state reliability • Reel and tape or bulk packaging available .091 (2.3) .083 (2.1) .024 (.6) .016 (.4) .154 (3.90) .148 (3.75) .020 (.5) .012 (.3) DESCRIPTION These subminiature solid state lamps are transfer molded in an axial lead package. They are available in yellow, green, high efficiency red and AIGaAs red in both diffused and water clear lens. .078 (1.9) .063 (1.6) .058 (1.48) .050 (1.28) .115 (2.92) .099 (2.52) .010 (.26) .002 (.06) Automatic placement equipment can be used to mount the LEDs on the PC board. The lamps can be mounted using either batch or in line vapor phase reflow solder processes. NOTES: .016 (.4) .008 (.2) .033 (.82) .000 (.00) .039 (1.0) .028 (.7) ALL DIMENSIONS ARE IN INCHES (mm) YOKE LEAD CONFIGURATION .087 (2.2) .079 (2.0) .020 (.5) .012 (.3) Z-BEND LEAD CONFIGURATION .087 (2.2) .079 (2.0) ANODE CATHODE .091 (2.3) .083 (2.1) .024 (.6) .016 (.4) .024 (.6) .016 (.4) CATHODE .091 (2.3) .083 (2.1) .240 (6.1) .232 (5.9) .020 (.5) .012 (.3) .300 (7.62) MAX ANODE .078 (1.9) .063 (1.6) .058 (1.48) .050 (1.28) .047 (1.2) .031 (0.8) .010 (.26) .002 (.06) .033 (.85) .026 (.65) .128 (3.24) .112 (2.84) .078 (1.9) .063 (1.6) .058 (1.48) .050 (1.28) .039 (.99) .023 (.59) .010 (.26) .002 (.06) .115 (2.92) .099 (2.52) .117 (2.96) .100 (2.56) .048 (1.22) .032 (.82) .033 (.85) .026 (.66) .189 (4.8) .173 (4.4) .034 (.86) .026 (.66) © 2003 Fairchild Semiconductor Corporation Page 5 of 6 7/14/03 SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS HIGH EFF. RED YELLOW GREEN AIGaAs RED HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A HLMP-Q101A Water Clear Water Clear Water Clear Water Clear Red Diffused MV6700A MV6300A MV6400A HLMP-Q150A HLMP-Q155A Red Diffused Yellow Diffused Green Diffused Red Diffused Water Clear DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2003 Fairchild Semiconductor Corporation Page 6 of 6 7/14/03