HMHAA280_06

HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers April 2006 HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Features ■ Compact 4-pin package (2.4mm maximum standoff ■ ■ Description The HMHA281, HMHA2801 Series consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 1.27mm. The HMHAA280 series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 1.27mm. ■ ■ ■ height) Half pitch leads for optimum board space savings Current Transfer Ratio in selected groups HMHA2801: 80–600% HMHA2801A: 80–160% HMHA2801B: 50–150% HMHA2801C: 50–100% HMHA281: 50–600% HMHAA280: 50–600% Available in tape and reel quantities of 500 and 2500 Applicable to Infrared Ray reflow (230°C Max, 30 seconds) BSI (File #8611/8612), CSA (File #1201524), UL (File #E90700) and VDE (File #136480) certified Applications HMHAA280 ■ AC line monitor ■ Unknown polarity DC sensor ■ Telephone line receiver HMHA281, HMHA2801 Series ■ Digital logic inputs ■ Microprocessor inputs ■ Power supply monitor ■ Twisted pair line receiver ■ Telephone line receiver Package Dimensions PIN 1 1 0.050 (1.27) 4 COLLECTOR 0.020 (0.51) 0.012 (0.30) 0.287 (7.29) 0.248 (6.30) 0.173 (4.40) TYP 0.106 (2.69) 0.091 (2.31) 2 3 EMITTER Equivalent Circuit (HMHAA280) 0.094 (2.39) 0.079 (2.01) ANODE 1 4 COLLECTOR 0.035 (0.89) 0.012 (0.30) 0.008 (0.20) 0.000 (0.0) 0.030 (0.75) 0.022 (0.55) CATHODE 2 3 EMITTER Note: All dimensions are in inches (millimeters) ©2006 Fairchild Semiconductor Corporation Equivalent Circuit (HMHA281, HMHA2801) 1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Symbol TOTAL PACKAGE TSTG TOPR EMITTER IF (avg) IF (pk) VR PD DETECTOR Continuous Collector Current PD VCEO VECO Power Dissipation Derate linearly (above 25°C) Collector-Emitter Voltage Emitter-Collector Voltage 50 150 1.5 80 7 mA mW mW/°C V V Continuous Forward Current Peak Forward Current (1µs pulse, 300pps.) Reverse Input Voltage (HMHA) Power Dissipation Derate linearly (above 25°C) 50 1 6 60 0.6 mA A V mW mW/°C Storage Temperature Operating Temperature -55 to +125 -55 to +100 °C °C Parameter Value Units Electrical Characteristics (TA = 25°C) Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit INDIVIDUAL COMPONENT CHARACTERISTICS Emitter VF Forward Voltage IF = 10mA HMHA281 HMHA2801 HMHA2801A HMHA2801B IF = 20mA IF = ±5mA IR Detector BVCEO BVECO ICEO CCE Breakdown Voltage Collector to Emitter Emitter to Collector Collector Dark Current Capacitance IC = 0.5mA, IF = 0 IE = 100µA, IF = 0 VCE = 80V, IF = 0 VCE = 0V, f = 1MHz All All All All 10 80 7 100 nA pF V Reverse Current VR = 5V HMHA2801C HMHAA280 All 1.4 1.4 5 µA 1.0 1.3 1.0 1.3 V 2 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Electrical Characteristics (TA = 25°C) (Continued) Symbol Characteristic Test Conditions Device Min. Typ.* Max. Unit TRANSFER CHARACTERISTICS CTR DC Current Transfer Ratio IF = ±5mA, VCE = 5V IF = 5mA, VCE = 5V HMHAA280 HMHA281 HMHA2801 HMHA2801A HMHA2801B IF = 1mA, VCE = 5V CTR Symmetry VCE (SAT) Saturation Voltage IF = ± 5mA, VCE = 5V IF = ± 8mA, IC = 2.4mA IF = 8mA, IC = 2.4mA IF = 10mA, IC = 2mA HMHA2801C HMHAA280 HMHAA280 HMHA281 HMHA2801 HMHA2801A HMHA2801B IF = 20mA, IC = 1mA) tr Rise Time (Non-Saturated) IC = 2mA, VCE = 5V, RL = 100Ω IC = 2mA, VCE = 2V, RL = 1 KΩ tf Fall Time (Non-Saturated) IC = 2mA, VCE = 5V, RL = 100Ω IC = 2mA, VCE = 2V, RL = 1KΩ HMHA2801C All except for HMHA2801C HMHA2801C All except for HMHA2801C HMHA2801C 3 9 3 9 0.2 µs 50 50 80 80 50 50 0.33 600 600 600 160 150 100 3.0 0.4 0.4 0.3 0.3 V % ISOLATION CHARACTERISTICS VISO Steady State Isolation Voltage 1 Minute All 2500 VRMS *All typicals at TA = 25°C 3 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Typical Performance Characteristics Fig. 1 Forward Current vs. Forward Voltage 100 TA = 25˚C 100 VCE = 10 V Fig. 2 Collector Current vs. Forward Current IF - FORWARD CURRENT (mA) IC - COLLECTOR CURRENT (mA) VCE = 5 V 10 10 VCE = 0.4 V 1 1 0.6 0.1 0.8 1.0 1.2 1.4 1.6 1 10 100 VF - FORWARD VOLTAGE (V) IF - FORWARD CURRENT (mA) Fig. 3 Current Transfer Ratio vs. Forward Current 1000 2.0 Fig. 4 Normalized CTR vs. Temperature IC /IF - CURRENT TRANSFER RATIO (%) NORMALIZED CTR (IF) / CTR (5mA) TA = 25˚C VCE = 10 V 1.5 IF = 5 mA 1.0 IF = 10 mA 0.5 IF = 1 mA Normalized to: IF = 5 mA VCE = 5 V TA = 25˚C VCE = 5 V 100 IF = 0.5mA 0.0 VCE = 0.4 V -0.5 10 1 10 100 -40 -20 0 20 40 60 80 100 IF - FORWARD CURRENT (mA) TA - AMBIENT TEMPERATURE (˚C) Fig. 5 Collector Current vs. Temperature 100 VCE = 5 V IC - COLLECTOR CURRENT (mA) IF = 25 mA 10 IF = 10 mA IF = 5 mA IF = 1 mA 1 IF = 0.5 mA 0.1 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) 4 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Typical Performance Characteristics (Continued) Fig. 6 Collector Current vs. Collector-Emitter Voltage 50 TA = 25˚C 18 16 14 IF = 30 mA 12 10 8 6 4 IF = 2 mA 2 IF = 1.0 mA 0 0 1 2 3 4 5 6 7 8 9 10 0 0.0 0.2 0.4 IF = 0.5 mA 0.6 IF = 1.0 mA 0.8 1.0 IF = 10 mA IF = 5 mA IF = 20 mA IF = 40 mA IF = 50 mA Fig. 7 Collector Current vs. Collector-Emitter Voltage IC - COLLECTOR CURRENT (mA) 40 IF = 40 mA 30 IF = 20 mA 20 IF = 30 mA IF = 50 mA IF = 10 mA IF = 5.0 mA 10 VCE - COLLECTOR-EMITTER VOLTAGE (V) IC - COLLECTOR CURRENT (mA) VCE - COLLECTOR-EMITTER VOLTAGE (V) Fig. 8 Collector Dark Current vs. Temperature ICEO - COLLECTOR DARK CURRENT (µA) 10 1000 Fig. 9 Switching Time vs. Load Resistance 1 VCE = 48 V VCE = 24 V 0.1 SWITCHING TIME (µs) TA = 25˚C IF = 16 mA VCC = 5 V 100 tOFF tS 10 VCE = 10 V 0.01 VCE = 5 V 1 tON 0.001 0 20 40 60 80 100 0.1 1 10 100 TA - AMBIENT TEMPERATURE (˚C) RL - LOAD RESISTANCE (KΩ) VCE(SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. 10 Collector-Emitter Saturation Voltage vs. Temperature 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.16 0.14 0.12 0.10 -40 -20 0 20 40 60 80 100 IF = 5 mA IC = 1 mA TA - AMBIENT TEMPERATURE (˚C) 5 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Ordering Information Option V R1 R2 R3 R4 R1V R2V R3V R4V VDE Approved Tape and Reel (500 units) Tape and Reel (2500 units) Tape and Reel (500 units; unit 180° rotated) Tape and Reel (2500 units; unit 180° rotated) Tape and Reel (500 units) and VDE Approved Tape and Reel (2500 units) and VDE Approved Tape and Reel (500 units; unit 180° rotated) and VDE Approved Tape and Reel (2500 units; unit 180° rotated) and VDE Approved Description Marking Information 1 281 V X YY M1 3 4 5 2 6 Definitions 1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) One digit year code Two digit work week ranging from ‘01’ to ‘53’ Assembly package code 6 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Tape and Reel Dimensions K0 t P0 P 2 D0 E A0 W1 B0 F W d P 1.27 Pitch Description Tape Width Tape Thickness Sprocket Hole Pitch Sprocket Hole Dia. Sprocket Hole Location Pocket Location Symbol W t P 0 D0 E F P 2 Pocket Pitch Pocket Dimension P A0 B0 K0 Pocket Hole Dia. Cover Tape Width Cover Tape Thickness Max. Component Rotation or Tilt D1 W 1 d D1 Dimensions (mm) 12.00±0.4 0.30±0.20 4.00±0.20 1.55±0.20 1.75±0.20 5.50±0.20 2.00±0.20 8.00±0.20 4.40±0.20 7.30±0.20 2.30±0.20 1.55±0.20 9.20 0.065±0.02 20˚ max Devices Per Reel R1 R2 500 2500 178 mm (7") 330 mm (13") Reel Diameter R1 R2 7 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers Footprint Drawing for PCB Layout 0.024 (0.61) 0.060 (1.52) 0.310 (7.87) 0.190 (4.83) 0.050 (1.27) Recommended Infrared Reflow Soldering Profile (heating) to 30 s Package Surface Temperature T (°C) 230°C (peak temperature) 210°C 180°C to 60 s 150 s Time (s) 90 s 60 s • Peak reflow temperature: 230°C (package surface temperature) for 30 seconds • Time of temperature higher than 210°C: 60 seconds or less • One time soldering reflow is recommended 8 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com HMHAA280, HMHA2801 Series, HMHA281 Half Pitch Mini-Flat Package 4-Pin Optocouplers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® FASTr™ ActiveArray™ FPS™ Bottomless™ FRFET™ Build it Now™ GlobalOptoisolator™ CoolFET™ GTO™ CROSSVOLT™ HiSeC™ DOME™ I2C™ EcoSPARK™ i-Lo™ E2CMOS™ ImpliedDisconnect™ EnSigna™ IntelliMAX™ FACT™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 Preliminary No Identification Needed Full Production Obsolete Not In Production 9 HMHAA280, HMHA2801 Series, HMHA281 Rev. 1.0.1 www.fairchildsemi.com