KBU4G

KBU4A - KBU4M Discrete POWER & Signal Technologies KBU4A - KBU4M 0.935(23.7) 0.895(22.7) 0.16(4.1) 0.14(3.6) 0.085(2.2) 0.280(7.1) 0.260(6.6) Features • • • High surge current capability. Reliable construction technique. Ideal for printed circuit board. 0.70(17.8) 0.66(16.8) 0.0760(19.3) MAX 0.065(1.7) 45 ° + + 0.455(11.3) – ~ ~+ 0.405(10.3) 0.165(4.2) 0.150(3.8) KBU 1.0(2.54) MIN 0.260(6.8) 0.180(4.5) 0.220(5.6) 4.0 Ampere Silicon Bridge Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RθJA RθJL Tstg TJ Average Rectified Current @ TA = 50°C Peak Forward Surge Current Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg Thermal Resistance, Junction to Lead,** per leg Storage Temperature Range Operating Junction Temperature TA = 25°C unless otherwise noted 0.180(4.6) 0.052(1.3) 0.048(1.2) Dimensions are in: inches (mm) Parameter Value 4.0 200 6.6 53 19 4.0 -55 to +150 -55 to +150 Units A A W mW/°C °C/W °C/W °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.375 " (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads. Electrical Characteristics Parameter 4A Peak Repetitive Reverse Voltage Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 100°C Maximum Forward Voltage Drop, per bridge @ 4.0 A 50 35 50 TA = 25°C unless otherwise noted Device 4B 100 70 100 4D 200 140 200 4G 400 280 400 5.0 500 1.0 4J 600 420 600 4K 800 560 800 4M 1000 700 1000 Units V V V µA µA V 1998 Fairchild Semiconductor Corporation KBU4A-KBU4M, Rev. A KBU4A - KBU4M Silicon Bridge Rectifiers (continued) Typical Characteristics Forward Current Derating Curve 5 FORWARD CURRENT (A) F orward Characteristics 100 FORWARD CURRENT (A) 4 3 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" 9.0 mm LEAD LENGTHS 10 2 1 TJ = 2 5º C A Pulse Width = 300µS 2% Duty Cycle 1 0 0 50 100 AMBIENT TEMPERATURE ( º C) 150 0.1 0.6 0.7 0.8 0.9 1 1.1 FORWARD VOLTAGE (V) 1.2 1.3 Non-Repetitive Surge Current 200 FORWARD SURGE CURRENT (A) 175 150 125 100 75 50 25 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 REVERSE CURRENT (µ A) 100 Reverse Characteristics T A= 100º C 10 1 T A= 25º C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) KBU4A-KBU4M, Rev. A KBU Package Dimensions KBU (FS PKG Code R7) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 8.0 0.185(4.7) 0.165(4.2) 0.935(23.7) 0.895(22.7) 0.16(4.1) 0.14(3.6) 0.280(7.1) 0.260(6.6) 0.085(2.2) 45° 0.70(17.8) 0.66(16.8) 0.760(19.3) MAX 0.065(1.7) + + 0.455(11.3) – ~ ~+ 0.405(10.3) 0.165(4.2) 0.150(3.8) 1.0(2.54) MIN 0.260(6.8) 0.180(4.5) 0.220(5.6) 0.180(4.6) 0.052(1.3) 0.048(1.2) July 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench  QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.