KBU6B

KBU6A - KBU6M KBU6A - KBU6M Features • • • High surge current capability. Reliable construction technique. Ideal for printed circuit board. - ~~ + KBU Bridge Rectifiers Absolute Maximum Ratings* Symbol VRRM VRMS VR IF(AV) IFSM Tstg TJ TA = 25°C unless otherwise noted Parameter 6A Maximum Repetitive Reverse Voltage Maximum RMS Bridge Input Voltage DC Reverse Voltage (Rated VR) Average Rectified Forward Current, @ TA = 65°C Non-repetitive Peak Forward Surge Current Storage Temperature Range Operating Junction Temperature 50 35 50 6B 100 70 100 6D 200 140 200 Value 6G 400 280 400 6.0 250 -55 to +150 -55 to +150 6J 600 420 600 6K 800 560 800 6M 1000 700 1000 Units V V V A A °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol PD RθJA RθJL Power Dissipation Thermal Resistance, Junction to Ambient,* per leg Thermal Resistance, Junction to Lead,* per leg Parameter Value 6.7 8.6 4.0 Units W °C/W °C/W *Device mounted on PCB with 0.375 " (9.5 mm) lead length and 0.5 x 0.5" (12 x 12 mm) copper pads. Electrical Characteristics Symbol VF IR TA = 25°C unless otherwise noted Parameter Forward Voltage, per bridge @ 6.0 A Reverse Current, total bridge @ rated VR TA = 25°C TA = 100°C Device 1.0 5.0 500 Units V µA µA 2001 Fairchild Semiconductor Corporation KBU6A-KBU6M, Rev. C KBU6A - KBU6M Bridge Rectifiers (continued) Typical Characteristics Average Rectified Forward Current, IF [A] Peak Forward Surge Current, IFSM [A] 8 200 175 150 125 100 75 50 25 1 2 5 10 20 Number of Cycles at 60Hz 50 100 6 4 2 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD LENGTHS 0 0 50 100 150 Ambient Temperature [ºC] Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current 100 100 T A= 100º C Forward Current, IF [A] 10 Reverse Current, IR [mA] 10 1 TJ = 2 5º C A Pulse Width = 300µS 1% Duty Cycle 1 T A= 25º C 0.1 0.6 0.7 0.8 0.9 1 1.1 Forward Voltage, VF [V] 1.2 1.3 0.1 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs Reverse Voltage 2001 Fairchild Semiconductor Corporation KBU6A-KBU6M, Rev. C TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT ™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ DISCLAIMER FAST ® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench ® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER ® SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET ® VCX™ STAR*POWER is used under license FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4