KSC1009

KSC1009 KSC1009 High Voltage Amplifier • • • • • High Collector-Base Voltage : VCBO=160V Collector Current : IC=700mA Collector Power Dissipation : PC=800mW Complement to KSA709 Suffix “-C” means Center Collector (1. Emitter 2. Collector 3. Base) 1 TO-92 1. Emitter 2. Base 3. Collector NPN Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Collector Power Dissipation Junction Temperature Storage Temperature Ratings 160 140 8 700 800 150 -55 ~ 150 Units V V V mA mW °C °C Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE (sat) VBE (sat) fT Cob Parameter Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Current Gain Bandwidth Product Output Capacitance Test Condition IC=100µA, IE=0 IC=10mA, IB=0 IE=10µA, IC=0 VCB=60V, IE=0 VEB=5V, IC=0 VCE=2V, IC=50mA IC=200mA, IB=20mA IC=200mA, IB=20mA VCE=10V, IC=50mA VCB=10V, IE=0, f=1MHz 30 40 0.2 0.86 50 8 Min. 160 140 8 0.1 0.1 400 0.7 1.0 V V MHz pF Typ. Max. Units V V V µA µA hFE Classification Classification hFE R 40 ~ 80 O 70 ~ 140 Y 120 ~ 240 G 200 ~ 400 ©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001 KSC1009 Typical Characteristics 100 90 IB=0.8mA IB=0.6mA IB=0.4mA 1000 VCE = 5V IC[mA], COLLECTOR CURRENT 80 70 60 50 40 30 hFE, DC CURRENT GAIN 10 100 10 IB=0.2mA 20 10 0 0 2 4 6 8 1 1 10 100 1000 VCE[V], COLLECTOR-EMITTER VOLTAGE IC[mA], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 10 1000 IC=10IB VCE=2V V BE(sat) 1 IC[mA], COLLECTOR CURRENT 100 1000 100 VCE(sat) 0.1 10 0.01 1 10 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 IC[mA], COLLECTOR CURRENT VBE[V], BASE-EMITTER VOLTAGE Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Figure 4. Base-Emitter On Voltage 100 f=1MHz IE=0 Cob[pF],CAPACTIANCE 10 1 1 10 100 VCB[V], COLLECTOR-BASE VOLTAGE Figure 5. Collector Output Capacitance ©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001 KSC1009 Package Demensions TO-92 4.58 –0.15 +0.25 0.46 14.47 ±0.40 ±0.10 4.58 ±0.20 1.27TYP [1.27 ±0.20] 3.60 ±0.20 1.27TYP [1.27 ±0.20] 0.38 –0.05 +0.10 3.86MAX 1.02 ±0.10 0.38 –0.05 +0.10 (R2.29) (0.25) Dimensions in Millimeters ©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. STAR*POWER™ FAST® OPTOPLANAR™ ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MICROWIRE™ OPTOLOGIC™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TruTranslation™ TinyLogic™ UHC™ UltraFET® VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be which, (a) are intended for surgical implant into the body, reasonably expected to cause the failure of the life support or (b) support or sustain life, or (c) whose failure to perform device or system, or to affect its safety or effectiveness. when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2001 Fairchild Semiconductor Corporation Rev. H3